Numerical study of steady/unsteady flow and heat transfer in porous media using a characteristics-based matrix-free implicit FV method on unstructured grids

In this study, a high-resolution characteristic-based finite-volume (FV) method on unstructured grids [Int. J. Numer. Method Eng. 50 (2001) 11; Int. J. Heat Fluid Flow 21 (2000) 432] is extended by a matrix-free implicit dual-time stepping scheme for the numerical simulation of steady and unsteady flow and heat transfer with porous media. The method has been used to study the characteristics of a complex problem: flow and heat transfer in a channel with multiple discrete porous blocks, which was originally proposed by Huang and Vafai [J. Thermophys. Heat Transfer 8 (3) (1994) 563]. In addition, flow and heat transfer in a channel partially or fully filled with porous layers and containing solid protruding blocks with constant heat flux on its lower surface are also investigated in details. Hydrodynamic and heat transfer results are reported for both steady and transient flow cases. In particular, the effects of Darcy and Reynolds numbers on heat transfer augmentation and pressure loss are studied. An in-depth discussion of the formation and variation of recirculation is presented and the existence of optimum porous insert is demonstrated. At high Reynolds numbers the flow in the porous channel exhibits a cyclic characteristics although unlike the non-porous channel flow, the cyclic vortex development is only restricted to a small area behind the last solid block, while temperature changes more slowly and does not exhibit cyclic variations over a long period of time. It is shown that for all the cases studied altering some parametric values can have significant and interesting effects on both flow pattern as well as heat transfer characteristics.     

Stability of noisy nonlinear auto-parametric systems

The purpose of this work is to examine the stationary motion and stability properties of stationary motion of two degree-of-freedom noisy auto-parametric systems We shall use analytical techniques to extend the existing results to examine such multi-dimensional nonlinear systems with noise, and in particular additive white noise. We obtain an approximation for the top Lyapunov exponent, the exponential growth rate, of the response of the so-called single-mode stationary motion. We show analytically that the top Lyapunov exponent is positive, and for small values of noise intensity ɛ and dissipation ɛ² the exponent grows in proportion with ɛ^2/3.     

Antibacterial alkaloids from Artabotrys crassifolius Hook.f. & Thomson

Chloroform extract of bark of Artabotrys crassifolius Hook.f. & Thomson exhibited antibacterial activities against both American Type Culture Collection and clinical bacterial strains in vitro with zones of inhibition ranging from 7 to 14 mm. Further analysis of this extract yielded artabotrine, liridine, lysicamine and atherospermidine. Artabotrine displayed a broad array of antibacterial activity mostly against Gram-positive bacteria with minimum inhibitory concentration (MIC) values ranging from 1.25 μg/mL to 5 μg/mL. Of note, artabotrine, liridine and lysicamine are bactericidal against Gram-negative extended-spectrum beta-lactamase-producing Klebsiella with MIC values equal 2.5, 2.5 and 10 μg/mL, respectively, and minimum bactericidal concentrations values equal to 2.5, 5 and 20 μg/mL.     

Aspects of electrical breakdown of liquid insulating material I

Summary The electrical breakdown strength of insulating oil depends on the size of foreign particles which may form bridges in a place of maximum electric stress. This theoretical relation was verified with colloid suspensions of particles of known radius. Mineral oils may deteriorate if the particles unite by the process of flocculation, the occurrence of which depends on the relative magnitudes of the attractive London-Van der Waals forces acting between the particles and the repulsive forces between their ion atmospheres. The possibility of using a mineral oil as an insulator depends on the existence of an upper limit of the size of particle complexes due to the rapid fall-off of the L.-v.d.W. forces at diameters exceeding 500 Å. The latter value of 2r corresponds to a breakdown strength of 1 kV/mm. If acids are being formed, the upper limit of 500 Å will shift towards larger values, and correspondingly the breakdown strength may drop below 1 kV/mm.     

Comparison and optimisation of biodiesel production from <Emphasis Type="Italic">Jatropha curcas</Emphasis> oil using supercritical methyl acetate and methanol

In this study, biodiesel has been successfully produced by transesterification using non-catalytic supercritical methanol and methyl acetate. The variables studied, such as reaction time, reaction temperature and molar ratio of methanol or methyl acetate to oil, were optimised to obtain the optimum yield of fatty acid methyl ester (FAME). Subsequently, the results for both reactions were analysed and compared via Response Surface Methodology (RSM) analysis. The mathematical models for both reactions were found to be adequate to predict the optimum yield of biodiesel. The results from the optimisation studies showed that a yield of 89.4 % was achieved for the reaction with supercritical methanol within the reaction time of 27 min, reaction temperature of 358°C, and methanol-to-oil molar ratio of 44. For the reaction in the presence of supercritical methyl acetate, the optimum conditions were found to be: reaction time of 32 min, reaction temperature of 400°C, and methyl acetate-to-oil molar ratio of 50 to achieve 71.9 % biodiesel yield. The differences in the behaviour of methanol and methyl acetate in the transesterification reaction are largely due to the difference in reactivity and mutual solubility of Jatropha curcas oil and methanol/methyl acetate.     

How thermal curing of an organic paper coating changes topography, chemistry, and wettability

Celluloses are preferred renewable substrates, but hydrophilicity and porosity disfavor their water resistance. We present here an ecofriendly application of imidized nanoparticles and a method to flexibly tune the surface wettability of papers. The soft nanostructured coating is sensitive to thermal curing, which affects both the surface chemistry and morphology. The thermal stability of the coating is first investigated with conventional and modulated differential scanning calorimetry, revealing influences of the imide content and an endotherm reaction below the glass transition temperature at 120-150 °C. The latter is studied in detail for an appropriate selection of the copolymer precursors. According to diffuse reflection infrared spectroscopy, Raman spectroscopy, and UV/vis spectroscopy, the endotherm corresponds to an imidization reaction. The morphology of the coatings is followed at various scale levels by contactless roughness measurements and atomic force microscopy. Finally, the experimental values are fitted to the parameters of the Wenzel wetting model, and so-called calibration curves for the relation between contact angles, surface roughness, and surface chemistry are presented. They allow the prediction of the water contact angle of coated papers from the hydrophilic to the hydrophobic range, with a maximum in hydrophobicity after increasing the imide content at 120-150 °C curing.     

Magnetically induced decrease in droplet contact angle on nanostructured surfaces

We report a magnetic technique for altering the apparent contact angle of aqueous droplets deposited on a nanostructured surface. Polymeric tubes with embedded superparamagnetic magnetite (Fe(3)O(4)) nanoparticles were prepared via layer-by-layer deposition in the 800 nm diameter pores of polycarbonate track-etched (PCTE) membranes. Etching away the original membrane yields a superparamagnetic film composed of mostly vertical tubes attached to a rigid substrate. We demonstrate that the apparent contact angle of pure water droplets deposited on the nanostructured film is highly sensitive to the ante situm strength of an applied magnetic field, decreasing linearly from 117 ± 1.3° at no applied field to 105 ± 0.4° at an applied field of approximately 500 G. Importantly, this decrease in contact angle did not require an inordinately strong magnetic field: a 15° decrease in contact angle was observed even with a standard alnico bar magnet. We interpret the observed contact angle behavior in terms of magnetically induced conformation changes in the film nanostructure, and we discuss the implications for reversibly switching substrates from hydrophilic to hydrophobic via externally tunable magnetic fields.