Block copolymerization of alkoxyallenes by the living coordination system with a π-allylnickel catalyst

Block copolymers of alkoxyallenes were obtained in high yield by the two-stage living coordi-nation polymerization of two kinds of alkoxyallenes using an allylnickel catalyst. The resulting copolymers had narrow molecular weight distributions (～ 1.1), regardless of the order of the monomer additions. When an alkoxyallene-bearing hydrophilic substituent was used as a co-monomer for the block copolymerization with that bearing a hydrophobic one, the resulting copolymer showed amphiphilic properties. For example, a block copolymer obtained by the copolymerization of n-hexyloxyallene with diethylene glycol allenyl methyl ether was soluble in water as well as n-hexane. © 1995 John Wiley & Sons, Inc.     

Development of column-pretreatment chelating resins for matrix elimination/multi-element determination by inductively coupled plasma-mass spectrometry

Chelating resins, two kinds of iminodiacetate derivatives (IDA) of cross-linked chitosan (CCS) were synthesized and investigated for adsorption capacity, matrix elimination and collection/concentration of analytes by a column pretreatment in a multi-element ICP-MS determination method. The adsorption behavior of 54 elements at the 10 ng ml(-1) level on chitosan derivatives in a packed mini-column was systematically examined. Almost 30 kinds of metal ions were recovered quantitatively at pH 5 with CCS-HP/IDA (cross-linked chitosan possessing N-2-hydroxypropyl iminodiacetic acid groups) column. Compared with available chitosan-iminodiacetate resin, CHITOPEARL CI-03, the recovery of the metal ions such as Cu, Pb and La is satisfactory with CCS-IDA (cross-linked chitosan possessing N,N-iminodiacetic acid groups) and CCS-HP/IDA using 2 M nitric acid as an eluent, which may be attributed to the difference of cross-linking and macroporous structure. Compared with Chelex-100, the adsorption efficiency is in the order: Chelex-100 > CCS-IDA > CCS-HP/IDA, especially in the chelating ability for alkaline earth metals. The resin with a longer spacer (CCS-HP/IDA) showed higher adsorption selectivity between heavy metal ions and alkaline earth metals at pH < 7. The separation efficiency of the major matrix cations in seawater (Na. K, Mg, Ca) has also been investigated, and matrix interference was negligible even in a seawater sample at pH 5 with CCS-HP/IDA. The recoveries of Mn at pH 5 with CCS-HP/IDA or Chelex-100 were almost 100%. However, those of Mg with each resin were 4 or 98%, respectively. The adsorption capacities of synthesized CCS-HP/IDA for Cu(II), Pb(II) and La(III) were 0.90, 0.65 and 0.34 mmol g(-1), respectively. Therefore, the chelating chitosan resins developed are applicable to the pretreatment of trace amounts of elements in various kinds of water samples.     

Separation of proteins by hydrophobic interaction chromatography at low salt concentration

We investigated protein separation by hydrophobic interaction chromatography (HIC) at low salt concentration on the supports of various hydrophobicities. Hydrophobic proteins could be successfully separated with more than 90% recovery by gradient elution of ammonium sulfate from 0.3-0.5 M to 0 in 50 mM phosphate buffer (pH 6.8) by using supports whose hydrophobicities were properly adjusted individually for each protein. Satisfactory results were also obtained by isocratic elution without ammonium sulfate and gradient elution of ethanol from 0 to 10%. HIC at low salt concentration was compatible with other modes of liquid chromatography like ion-exchange chromatography. On the other hand, it was not successful to separate hydrophilic proteins at low salt concentration. Recoveries of hydrophilic proteins decreased before they were retained enough as support hydrophobicity increased. Therefore, it is inevitable to use a higher concentration of salt, e.g., 1-2 M ammonium sulfate, on hydrophilic or moderately hydrophobic support in order to retain hydrophilic proteins without decrease in recovery.     

Structural and Electrochemical Comparison of Copper(II) Complexes with Tripodal Ligands

A series of copper(II) complexes with tripodal polypyridylmethylamine ligands, such as tris(2-pyridylmethyl)amine (tpa), ((6-methyl-2-pyridyl)methyl)bis(2-pyridylmethyl)amine (Me(1)tpa), bis((6-methyl-2-pyridyl)methyl)(2-pyridylmethyl)amine (Me(2)tpa), and tris((6-methyl-2-pyridyl)methyl)amine (Me(3)tpa), have been synthesized and characterized by X-ray crystallography. [Cu(H(2)O)(tpa)](ClO(4))(2) (1) crystallized in the monoclinic system, space group P2(1)/a, with a = 15.029(7) ?, b = 9.268(2) ?, c = 17.948(5) ?, beta = 113.80(3) degrees, and Z = 4 (R = 0.061, R(w) = 0.059). [CuCl(Me(1)tpa)]ClO(4) (2) crystallized in the triclinic system, space group P&onemacr;, with a = 13.617(4) ?, b = 14.532(4) ?, c = 12.357(4) ?, alpha = 106.01(3) degrees, beta = 111.96(2) degrees, gamma = 71.61(2) degrees, and Z = 4 (R = 0.054, R(w) = 0.037). [CuCl(Me(2)tpa)]ClO(4) (3) crystallized in the monoclinic system, space group P2(1)/n, with a = 19.650(4) ?, b = 13.528(4) ?, c = 8.55(1) ?, beta = 101.51(5) degrees, and Z = 4 (R = 0.071, R(w) = 0.050). [CuCl(Me(3)tpa)][CuCl(2)(Me(3)tpa)]ClO(4) (4) crystallized in the monoclinic system, space group P2(1)/a, with a = 15.698(6) ?, b = 14.687(7) ?, c = 19.475(4) ?, beta = 97.13(2) degrees, and Z = 4 (R = 0.054, R(w) = 0.038). All the Cu atoms of 1-4 have pentacoordinate geometries with three pyridyl and one tertiary amino nitrogen atoms, and a chloride or aqua oxygen atom. Nitrite ion coordinated to the Cu(II) center of Me(1)tpa, Me(2)tpa, and Me(3)tpa complexes with only oxygen atom to form nitrito adducts. The cyclic voltammograms of [Cu(H(2)O)(Me(n)()tpa)](2+) (n = 0, 1, 2, and 3) in the presence of NO(2)(-) in H(2)O (pH 7.0) revealed that the catalytic activity for the reduction of NO(2)(-) increases in the order Me(3)tpa < Me(2)tpa < Me(1)tpa < tpa complexes.     

The structural investigation of SbBr3· (POBr3)2 BY 81Br and 121SbNQR

⁸¹Br and ¹²¹Sb NQR have been observed for SbBr₃·(POBr₃)₂, and the Zeeman effect on ⁸¹Br NQR lines examined at 77 K. It is considered from these results that this complex consists of a dimer of two SbBr₃·(POBr₃)₂ molecules bridged by two Br atoms.     

Fabrication of Hard Dextran DEAE: Adsorption Equilibria of BSA

A hard dextran-DEAE ion exchanger (Hard Dextran DEAE) was developed. It is hard and keeps good properties of dextran-DEAE for protein separation. It is not compressed in a column and can be used in much wider range of flow rate in the column than the commercial hard gel, DEAE Sepharose Fast Flow made of agarose. The saturation capacity of BSA on Hard Dextran DEAE is about 1.7 times of that on DEAE Sepharose Fast Flow at pH 6.9. Equilibrium isotherm for adsorption of BSA depends on pH considerably. When pH 5.5, the equilibrium isotherm is correlated by the Langmuir equation. When pH 5.05, the isotherm is correlated by the Freundlich equation. The higher the concentration of NaCl is, the smaller the amount of BSA adsorbed. When the concentration of NaCl is higher than 100 mol m–3 at pH 6.9 and 50 mol m–3 at pH 4.8, BSA was not adsorbed on the resin. This may suggest that BSA is adsorbed by electrostatic attraction. About 100 mol m–3 NaCl aqueous solution can be used as an eluant of proteins.     

Site specificity of metal ions in heterodinuclear complexes derived from an "end-off" compartmental ligand

A phenol-based "end-off" compartmental ligand, 2-[N-[2-(dimethylamino)ethyl]iminomethyl]-6-[N,N-di(2-pyridylmethyl)aminomethyl]-4-methylphenol (HL), having a bidentate arm and a tridentate arm attached to the 2 and 6 positions of the phenolic ring, has afforded the following heterodinuclear M(a)(II)M(b)(II) complexes: [CuM(L)(AcO)(2)]ClO(4) (M = Mn (1), Fe (2), Co (3), Ni (4), Zn (5)), [ZnM(L)(AcO)(2)]ClO(4) (M = Co (6), Ni (7)), and [CuNi(L)(AcO)(NCS)(2)] (8). 1.MeOH (1'), 2.MeOH (2'), 3.MeOH (3'), 4.MeOH (4'), 5.MeOH (5'), and 7.MeOH (7') are isostructural and have a heterodinuclear core bridged by the phenolic oxygen atom of L(-) and two acetate groups. In 1'-5' the Cu(II) is bound to the bidentate arm and has a square-pyramidal geometry with one acetate oxygen at the apical site. The M(II) is bound to the tridentate arm and has a six-coordinate geometry together with two acetate oxygen atoms. In the case of 7' the Zn is bound to the bidentate arm and the Ni is bound to the tridentate arm. 8.2-PrOH (8') has a dinuclear core bridged by the phenolic oxygen atom of L(-) and one acetate group. The Cu bound to the bidentate arm has a square-pyramidal geometry with an isothiocyanate group at the apical site. The Ni bound to the tridentate arm has a six-coordinate geometry with further coordination of an isothiocyanate group. The site specificity of the metal ions is discussed together with the crystal structure of [Cu(4)(L)(2)(AcO)(3)](ClO(4))(3).H(2)O (9) prepared in this work.     

Silicon hydrides and nickel complexes : II. Mechanism of the hydrosilylation catalyzed by nickel-phosphine complexes

Two ethylene-nickel(0) complexes, viz., [1,2-bis(diphenylphosphino)ethane]-(ethylene)nickel(0) and bis(triphenylphosphine)(ethylene)nickel(0) have been used in a comparison of their catalytic activities in hydrosilylation reactions with those of the corresponding nickel(II) complexes, viz., dichloro [1,2-bis(diphenylphosphino)-ethane]nickel(II) and dichlorobis(triphenylphosphine)nickel(II). The reaction profiles are similar, apart from a significant difference in the induction period; the nickel(II) catalysts requiring a substantially longer time. A mechanism involving a nickel(0) species is proposed for the hydrosilylation.The interchange of hydrogen and chlorine on silicon accompanying the hydrosilylation is related to a high electron density at the nickel atom bearing the phosphine, olefin, and silicon hydride ligands.     

Determination of micelle mass by electrospray ionization mass spectrometry

By electrospray ionization (ESI) mass spectrometry, micelle solutions of sodium cholate were investigated in detail in the presence and absence of ethanol. The average aggregation number could be evaluated from the spectra acquired under conditions where soft collisions adequate to measure the micelle solution were induced, and the value agreed well with that obtained previously by other methods. From the dependence on ethanol content, it was also found that the average aggregation number in aqueous solution without organic solvent could be reliably estimated. The ESI method proved to be a useful tool for determining the micelle mass in the original aqueous phase.