Preparation and gas separation properties of zeolite T membrane

Zeolite T membranes were synthesized on tubular porous mullite tubes by hydrothermal synthesis. The membranes selectively permeated carbon dioxide from CO2/CH4 and CO2/N2 mixtures with high separation performances, which were due to combined effects of molecular sieving and competitive adsorption.     

A new approach to predict the biological activity of molecules based on similarity of their interaction fields and the logP and logD values: application to auxins

The activity of a biological compound is dependent both on specific binding to a target receptor and its ADME (Absorption, Distribution, Metabolism, Excretion) properties. A challenge to predict biological activity is to consider both contributions simultaneously in deriving quantitative models. We present a novel approach to derive QSAR models combining similarity analysis of molecular interaction fields (MIFs) with prediction of logP and/or logD. This new classification method is applied to a set of about 100 compounds related to the auxin plant hormone. The classification based on similarity of their interaction fields is more successful for the indole than the phenoxy compounds. The classification of the phenoxy compounds is however improved by taking into account the influence of the logP and/or the logD values on biological activity. With the new combined method, the majority (8 out of 10) of the previously misclassified derivatives of phenoxy acetic acid are classified in accord with their bioassays. The recently determined crystal structure of the auxin-binding protein 1 (ABP1) enabled validation of our approach. The results of docking a few auxin related compounds with different biological activity to ABP1 correlate well with the classification based on similarity of MIFs only. Biological activity is, however, better predicted by a combined similarity of MIFs + logP/logD approach.     

Selective wet air oxidation of diluted aqueous ammonia solutions over co-precipitated transition metal-aluminium catalysts

Catalytic wet air oxidation of ammonia over a co-precipitated transition metal-aluminium catalyst was investigated. Copper-aluminium (Cu-Al-O) catalyst exhibited the highest activity and N₂ selectivity among those prepared from Co, Fe, Mn, and Ni. 50% of 1500 ppm of ammonia could be removed from wastewater of pH 12 at 503 K under 2.0 MPa of air by using 4.0 g of catalyst without formation of toxic nitrogen containing compounds. Cu and Al ions were not found in solution after the reaction. It has been found that the catalytic performance of Cu-Al-O catalyst was strongly dependent on the preparation methods. The co-precipitated Cu-Al-O catalysts showed high N₂ selectivity. The presence of CuO is concluded to promote the reaction and CuAl₂O₄ in bulk phase is needed to stabilize the catalyst.     

A new method for the synthesis of some 9-β-D-arabinofuranosylpurines by a combination of chemical and enzymatic reactions

An enzymatic transarabinosylation between 2-chlorohypoxanthine and 1-β-$\text{D}$-arabinofuranosyluracil gave 9-β-$\text{D}$-arabinofuranosyl-2-chlorohypoxanthine which was chemically converted to 9-β-$\text{D}$-arabinofuranosylguanine and its derivatives.     

Kinetics and mechanism of the first aquation stage for the [Cr(pic)3]0 and [Cr(pic)2(OH)]2 0 complexes in HClO4 solutions

Aquation of [Cr(pic)₃]⁰ and [Cr(pic)₂(OH)]₂ ⁰ in aqueous HClO₄ solutions leads to formation of the common product – [Cr(pic)₂(H₂O)₂]⁺. The first, reversible stage, the ring opening via Cr—N bond breaking in [Cr(pic)₃]⁰ is followed by the second, rate-determining step – one-end bonded pic ligand liberation. In the case of the [Cr(pic)₂(OH)]₂ ⁰ complex, the first faster stage produces the singly bridged dimer, which undergoes cleavage into the parent monomers in the second, much slower step. The subsequent aquation of [Cr(pic)₂(H₂O)₂]⁺ is extremely slow and leads to [Cr(pic)(H₂O)₄]²⁺ formation, which practically does not undergo further ligand substitution under the conditions applied. Kinetics of the first aquation stage for [Cr(pic)₃]⁰ and of the second step for [Cr(pic)₂(OH)]₂ ⁰ were studied spectrophotometrically in the 0.1–1.0 M HClO₄ range at I = 1.0 M. The observed pseudo-first order rate constant for [Cr(pic)₃]⁰ decreases with [H⁺] increase according to the rate law: k _obs = k ₁ + k _–1 Q ₁/[H⁺], where k ₁ and k _–1 are the rate constants of the forward and the reverse processes in the unprotonated substrate and Q ₁ is the protonation constant of the pyridine nitrogen atom. In the case of the [Cr(pic)₂(OH)]₂ ⁰ complex, the rate for the singly bridged dimer cleavage does not depend on [H⁺]. The activation parameters for the chelate-ring opening in [Cr(pic)₃]⁰ and for the singly bridged dimer cleavage have been determined and discussed. Some kinetic data of the slow, second aquation stage for the [Cr(pic)₃]⁰ complex and of the fast, first aquation stage for the doubly bridged dimer have been studied; for both reactions the rate increases linearly with the increase in [H⁺].     

Physically adsorbed chiral stationary phase of avidin on monolithic silica column for capillary electrochromatography and capillary liquid chromatography

The physical adsorption method proposed previously has been successfully applied to a monolithic silica column. By virtue of the physical adsorption, a chiral stationary phase of avidin was prepared onto the silica monolith. The phase ratio of resulting stationary phase was evaluated with frontal analysis. The method proved to be comparable in phase ratio to the chemical bonding methods used in high-performance liquid chromatography (HPLC). Enantiomer separations were carried out in capillary electrochromatography (CEC) and capillary liquid chromatography (CLC) modes. Due to its larger phase ratio, the resulting column showed more powerful separation capability as compared to open-tubular CEC (OTCEC). Twelve chiral compounds were baseline-resolved. The resulting column showed high separation efficiency, with average theoretical plate numbers of 66 000/m for CLC and 122 000/m for CEC. Good reproducibility was observed, with RSD value less than 1.3% for retention time, retention factor and separation factor, and less than 6.6% for plate counts and resolution (n = 40). Fast separations were achieved with a short column. The test enantiomers were baseline-resolved within 4 min under CLC and CEC modes. In addition, field-enhanced sample injection (FESI) was coupled to CLC as well as CEC to improve the detection sensitivity.     

Microphysiometric Measurement of PAF Receptor Responses to Ginkgolides

Microphysiometry was used to evaluate the effects of terpene trilactone and flavonoid constituents of Ginkgo biloba on human platelet‐activating‐factor receptor (PAFR). Inhibition of the platelet‐activating factor response by terpene trilactones was confirmed using this functional assay. Ginkgolide B (GB) and 10‐O‐benzyl‐GB showed the strongest inhibition (81 and 93%, resp.) of the PAFR response, while the flavonoids rutin, quercetin, and kaempferol showed negligible response inhibition. G. biloba extract mixtures were also tested, and results indicate possible synergistic effects among various components.     

Thermal decomposition of vinylacetylene in shock waves

The thermal decomposition of vinylacetylene (C₄H₄) was studied behind reflected shock waves using both a single-pulse method (reaction time between 0.8 and 3.3 ms) and a time-resolved UV-absorption method (230 nm). The studies were done over the temperature range of 1170–1690 K at the total pressure range of 1.3–2.3 atm. The mechanism was used to interpret both the early and late stages of vinylacetylene decomposition at the high temperatures. It was confirmed that C₄H₄ dissociation proceeded through the following three channels. The rate constant expression of reaction (1) was determined as k₁ = 6.3 × 10¹³ exp(?87.1 kcal/RT) s^?1. The rate constants of the succeeding reactions (chain reaction, C₄H₄ + H → i-C₄H₃ + H₂ and C₄H₄ + H → C₂H₂ + C₂H₃ and decomposition reactions of free radicals, i-C₄H₃ + M → C₄H₂ + H + M) were confirmed or estimated. © John Wiley & Sons, Inc.     

Polarized near-edge x-ray-absorption fine structure spectroscopy of C60-functionalized 11-amino-1-undecane thiol self-assembled monolayer: molecular orientation and evidence for C60 aggregation

Near-edge x-ray-absorption fine structure (NEXAFS) spectroscopy was adopted to probe the unoccupied electronic states of C60 anchored onto an organized assembly of 11-amino-1-undecane thiol on Au(111). The polarization dependence of the intensity of pi* resonance associated with C60 pi network revealed the self-assembled monolayer (SAM) system to be oriented with an average molecular tilt angle of 57 degrees with respect to the surface normal. Invoking the absence of solid-state band dispersion effects and in comparison to solid C60 and /or 1-ML C60/Au(111), the electronic structure of the resulting assembly was found dominated by spectral position shift and linewidth and intensity changes of the lowest unoccupied molecular orbital (LUMO), LUMO+1, and LUMO+2 orbitals. The latter implied hybridization between N Pz of -NH2 group of thiolate SAM and pi levels of C60, resulting in a nucleophilic addition with a change in the symmetry of C60 from Ih to C1 in the SAM. Occurrence of a new feature at 285.3 eV in the NEXAFS spectrum, assigned previously to pi* graphitic LUMO, signified the formation of aggregated clusters, (C60)n of C60 monomer. Low tunneling current scanning tunneling microscopy confirmed them to be spherical and stable aggregates with n approximately 5.