Nonclassical Urea Oligomers. VII. Binding Specificity of Carbanilido-ethylenimine Oligomer: Absorption Behavior in Suspension

Polyester elastomers were prepared by block copolymerization of dimethyl terephthalate (DMT), butanediol (BDO), and polytetramethylene glycol (PTMG). Polyester from DMT and butanediol forms a high-melting hard segment in block copolyester to prevent undue chain slippage when fibers are stretched. High elongation was provided by soft segment which consisted of condensation product from DMT and PTMG.

Experiments were carried out to determine the effect of composition variables on the properties of these elastomers, such as glass transition temperature, elongation at break, tenacity, and elastic recovery. The study on molecular characteristics of the elastic polyester showed that a leather-like region exists between glassy and rubbery regions. These elastomers were melt-spun to give elastic fibers which are competitive with commercially available Spandex-type fibers.     

Complexation of acyclic ligands having two terminal quinoline units with alkali metal cations

Abstract

Acyclic multidentate ligands consisting of an oligooxyethylene chain (di-, tri-, tetra-, and penta-) and two terminal rigid quinaldate end groups were newly prepared and their complexation properties with alkali metal cations were estimated by the solvent extraction method to indicate a better affinity for K⁺. Among them, the tetraethylene glycol derivative showed the highest K⁺ binding on about the same level as 18-crown-6. Their conformations in solution and in the solid state were examined by using ¹H- and ¹³C-NMR spectroscopy and X-ray crystal analyses, respectively. The better binding of K⁺ in comparison with the corresponding glymes or analogues having the same donor sites was reasonably explained by considering the effective co-ordination of the carbonyl oxygen of the ester groups and the parallel π-stacking interaction between two quinaldate surfaces.     

Synthetic study of kosinostatin aglycone: synthesis of BCDE rings using alkoxycarbonylmethylation of diazonaphthoquinone

A synthetic study of kosinostatin aglycone is reported. Synthesis of key intermediate lactone 3, which corresponds to the BCDE ring fragment, was accomplished, and the precursor BCD ring fragment 5 was synthesized via two routes. First, 5 was synthesized from 2,5-dimethoxybenzaldehyde 16 by the combination of typical known transformations including efficient application of non-aqueous OsO₄ oxidation in the presence of PhB(OH)₂. However the synthesis required 15 long steps, and its main difficulty was ortho-alkoxycarbonylmethylation of 1-naphthol. Next we attempted to apply our recently developed alkoxycarbonylmethylation of diazonaphthoquinone for the synthesis of 5, and 5 was successfully synthesized in 9 steps from the same starting compound 16. Finally, 5 was stereoselectively converted to lactone 3 via trifluoroacetic acid-mediated cyclization of the 3,4-epoxycylohexanecarboxylic acid derivative.     

Third-order aberration analysis of an off-axial optical system

The aberration theory applied to co-axial optical systems is extended to off-axial systems, for which third-order aberration coefficients are considered. The derived aberrations are analyzed using three-dimensional ray bundles, spot diagrams, and image charts, and classified in relation to the system symmetry. This theory is very useful for optical designers, allowing them to clarify the relationship between the structures of off-axial optical systems and the corresponding off-axial aberrations.     

Second-harmonic-generation microscope using eight-segment polarization-mode converter to observe three-dimensional molecular orientation

We developed a compact polarization-mode converter for microscopy to control three-dimensional polarization at the focus. The converter consisted of two homogeneously aligned liquid-crystal spatial light modulators with eight independently controllable electrodes (segments), and a quarter-waveplate. The converter converted a linearly polarized beam to three polarization modes: two orthogonal linear polarizations and a pseudo-radial polarization. We applied the converter to second-harmonic-generation microscopy and demonstrated the detection of three-dimensional molecular orientation.     

Formation of One‐Dimensional Helical Columns and Excimerlike Excited States by Racemic Quinoxaline‐Fused [7]Carbohelicenes in the Crystal

A series of quinoxaline‐fused [7]carbohelicenes (HeQu derivatives) was designed and synthesized to evaluate their structural and photophysical properties in the crystal state. The quinoxaline units were expected to enhance the light‐emitting properties and to control the packing structures in the crystal. The electrochemical and spectroscopic properties and excited‐state dynamics of these compounds were investigated in detail. The first oxidation potentials of HeQu derivatives are approximately the same as that of unsubstituted reference [7]carbohelicene (Heli), whereas their first reduction potentials are shifted to the positive by about 0.7 V. The steady‐state absorption, fluorescence, and circular dichroism spectra also became redshifted compared to those of Heli. The molecular orbitals and energy levels of the HOMO and LUMO states, calculated by DFT methods, support these trends. Moreover, the absolute fluorescence quantum yields of HeQu derivatives are about four times larger than that of Heli. The structural properties of the aggregated states were analyzed by single‐crystal analysis. Introduction of appropriate substituents (i.e., 4‐methoxyphenyl) in the HeQu unit enabled the construction of one‐dimensional helical columns of racemic HeQu derivatives in the crystal state. Helix formation is based on intracolumn π‐stacking between two neighboring [7]carbohelicenes and intercolumn CH ??? N interaction between a nitrogen atom of a quinoxaline unit and a hydrogen atom of a helicene unit. The time‐resolved fluorescence spectra of single crystals clearly showed an excimerlike delocalized excited state owing to the short distance between neighboring [7]carbohelicene units.     

Efficient Light-Harvesting Antennae Resulting from the Dense Organization of Dyes into DNA Junctions through d-Threoninol

Herein we report the construction of efficient light-harvesting antennae by hybridization of DNA oligonucleotides containing high densities of fluorophores into DNA junctions through d -threoninol. Six pyrene donors could be incorporated into each arm without self-quenching. A perylene acceptor was located at the center of the junction. Antenna effects of a duplex and three- to eight-way junctions were systematically compared. Six- and eight-way junctions had the highest antenna effects, and their effective absorption coefficients were 8.5 times higher than that of perylene. Interestingly, even-numbered junctions had higher efficiencies than odd-numbered junctions. Nondenaturing gel analyses and fluorescence lifetime measurements demonstrated that the strong odd–even effects were derived from differences in the stability of junctions. The results presented will guide the design of efficient artificial photosynthetic systems.     

Dielectric properties of a hydrogen-bonded liquid-crystalline side-chain polymer

The dielectric properties of a hydrogen-bonded side-chain liquid-crystalline polysiloxane have been examined over wide ranges of frequency and temperature. This polymer has a side-chain mesogenic moiety consisting of a benzoic acid and a stilbazole. The observed dielectric loss curves contain a component from dipole reorientation of the hydrogen-bonded mesogenic group. It has been found to be possible that, using electrical and thermal treatments, such a polymer built through hydrogen bonding can align homeotropically.     

Removal of phosphate by aluminum oxide hydroxide

The development and manufacture of an adsorbent to remove phosphate ion for the prevention of eutrophication in lakes are very important. The characteristics of phosphate adsorption onto aluminum oxide hydroxide were investigated to estimate the adsorption isotherms, the rate of adsorption, and the selectivity of adsorption. Phosphate was easily adsorbed onto aluminum oxide hydroxide, because of the hydroxyl groups. The adsorption of phosphate onto aluminum oxide hydroxide was influenced by pH in solution: the amount adsorbed was greatest at pH 4, ranging with pH from 2 to 9. The optimum pH for phosphate removal by aluminum oxide hydroxide is 4. The selectivity of phosphate adsorption onto aluminum oxide hydroxide was evaluated based on the amount of phosphate ion adsorbed onto aluminum oxide hydroxide from several anion complex solutions. It is phosphate that aluminum oxide hydroxide can selectively adsorb. The selectivity of phosphate onto aluminum oxide hydroxide was about 7000 times that of chloride. This result indicated that the hydroxyl groups on aluminum oxide hydroxide have selective adsorptivity for phosphate and could be used for the removal of phosphate from seawater.