From penicillin to penem and carbapenem. VI1) : Synthesis of dethiathienamycin

A new C₃-unit substitution reaction at C-4 position of 4- acetoxyazetidinone derivative ($\text{1}$ and $\text{5}$) by tetraallyltin ($\text{2}$) in the presence of 1/10 eq. of BF₃-ether in methylene chloride is described. From 4-allylazetidinone derivative ($\text{3}$) via ylid intermediate ($\text{14}$) dethiathienamycin ($\text{16}$) was synthesized.     

Can a meso-type dinuclear complex be chiral?: dinuclear β-diketonato Ru(III) complexes

Dinuclear Ru(III) complexes, [Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)] (acacH = acetylacetone; dabeH(2) = 1, 2-diacetyl-1,2-dibenzoylethane) and [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)] (tbetH(2) = 1,1,2,2-tetrabenzoylethane) were synthesized by reacting [Ru(acac)(2)(CH(3)CN)(2)]PF(6) with dabeH(2) and tbetH(2) respectively, in toluene. The X-ray structural analysis of a meso-type dinuclear Ru(III) complex, ΔΛ-[Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)], showed that the bridging part became chiral due to the orthogonal twisting of two non-symmetrical β-diketonato moieties. To confirm this conclusion, the complex was resolved chromatographically to provide a pair of optical antipodes. Such chirality in the bridging part was not generated for [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)], because the β-diketonato moieties in tbet(2-) are symmetrical.     

Preparation, structure, and properties of tetranuclear vanadium(III) and (IV) complexes bridged by diphenyl phosphate or phosphate

Three novel tetranuclear vanadium(III) or (IV) complexes bridged by diphenyl phosphate or phosphate were prepared and their structures characterized by X-ray crystallography. The novel complexes are [{V(III)(2)(μ-hpnbpda)}(2){μ-(C(6)H(5)O)(2)PO(2)}(2)(μ-O)(2)]·6CH(3)OH (1), [{V(III)(2)(μ-tphpn)(μ-η(3)-HPO(4))}(2)(μ-η(4)-PO(4))](ClO(4))(3)·4.5H(2)O (2), and [{(V(IV)O)(2)(μ-tphpn)}(2)(μ-η(4)-PO(4))](ClO(4))(3)·H(2)O (3), where hpnbpda and tphpn are alkoxo-bridging dinucleating ligands. H(3)hpnbpda represents 2-hydroxypropane-1,3-diamino-N,N'-bis(2-pyridylmethyl)-N,N'-diacetic acid, and Htphpn represents N,N,N',N'-tetrakis(2-pyridylmethyl)-2-hydroxy-1,3-propanediamine. A dinuclear vanadium(IV) complex without a phosphate bridge, [(VO)(2)(μ-tphpn)(H(2)O)(2)](ClO(4))(3)·2H(2)O (4), was also prepared and structurally characterized for comparison. The vanadium(III) center in 1 adopts a hexacoordinate structure while that in 2 adopts a heptacoordinate structure. In 1, the two dinuclear vanadium(III) units bridged by the alkoxo group of hpnbpda are further linked by two diphenylphosphato and two oxo groups, resulting in a dimer-of-dimers. In 2, the two vanadium(III) units bridged by tphpn are further bridged by three phosphate ions with two different coordination modes. Complex 2 is oxidized in aerobic solution to yield complex 3, in which two of the three phosphate groups in 2 are substituted by oxo groups.     

Allyl radical nature of a phenylcyclopentadienyl radical annelated with two homoadamantene frameworks

1-Phenylcyclopentadiene fused with two homoadamantene units at the 2,3- and 4,5-positions (4) was deprotonated with KH to lead to the quantitative formation of the corresponding cyclopentadienyl (Cp) anion 3(-). This anion was oxidized by AgCl to afford an orange crystalline solid consisting of Cp radical 3(?) and cyclopentadiene 4. The ESR spectrum in hexane exhibited approximately 15 lines, demonstrating that the two homoadamantene frameworks were equivalent and that the C1-C2(Ph)-C3 moiety of the five-membered ring formed a symmetrical allyl-like radical in agreement with the prediction by DFT calculation. The reaction of the Cp radical 3(?) with an oxygen molecule in the presence of Ag(+)SbF(6)(-) afforded the SbF(6)(-) salt of a phenylpyrylium ion annelated with two homoadamantene frameworks (8(+)SbF(6)(-)).     

Persistent pi radical cations: self-association and its steric control in the condensed phase

Pi Radical cations, which are highly reactive in general, can be made persistently stable by appropriate structural modification with heteroatoms, pi-conjugated systems, and alkyl substituents. Many of these pi radical cations undergo self-association in the condensed phase. The steric control of such self-association of stabilized pi radical cations is the subject of the present article. Such an association can result in the formation of pi- and/or sigma-dimers. The pi-dimerization in particular is now considered as an important intermolecular interaction for model studies of a charge-transport phenomenon in positively doped conducting polymers. On the other hand, the intermolecular interactions can be suppressed when the pi-system is modified with sterically demanding structural units, for example, by annelation with bicycloalkene frameworks. This structural modification not only brings about unusual stabilization of the radical cations but provides valuable information on the electronic structure/properties of the positively charged pi-systems in a segregated state.     

Synthesis and structural, electronic, and optical properties of oligo(thienylfuran)s in comparison with oligothiophenes and oligofurans

[structure: see text] Alternate thiophene/furan oligomers having four and six heterocycles, i.e., oligo(thienylfuran) dimer and trimer 2 (n = 4 and 6), were newly synthesized by repetitive Stille coupling reactions. The structural, electronic, and optical properties of these oligomers were investigated by X-ray crystallography (for n = 4), cyclic voltammetry (CV), UV-vis and fluorescence spectroscopy, and DFT calculations, and the results were compared with those of corresponding oligothiophenes (1) and oligofurans (3). The inter-ring torsional energy profiles calculated for bithiophene 1 (n = 2), thienylfuran 2 (n = 2), and bifuran 3 (n = 2) at the B3LYP/6-31G(d) level indicated that the most stable conformers of 2 (n = 2) and 3 (n = 2) are fully coplanar with transoid structure while that of 1 (n = 2) is twisted with a dihedral angle of 158 degrees . In accord with this, X-ray crystallographic analysis of 2 (n = 4) revealed that the pi-conjugated system is nearly planar with the inter-ring C=C-C=C dihedral angles between the thiophene and furan rings of 173.6(7) degrees , -177.0(7) degrees , and 172.6(6) degrees . In the packing structure, these nearly planar molecules are arranged in a herringbone pattern. The CV on a series of oligo(thienylfuran)s 2 showed irreversible oxidation peaks at +0.90, +0.42, and +0.29 V vs Fc/Fc(+) for n = 2, 4, and 6, which were 0.15-0.18 V lower than those for corresponding oligothiophenes 1 and were closer to those for oligofurans 3. On the other hand, the UV-vis spectra of 2 showed the longest wavelength absorption to be almost identical with those of the corresponding 1, and more bathochromically shifted than those of the corresponding 3. The results of CV and UV-vis measurements were supported by DFT calculations (B3LYP/ 6-311+G(2d,p)//B3LYP/6-31G(d)). Thus, oligo(thienylfuran)s 2 have HOMOs which are higher than those of oligothiophenes 1 and close to those of 3, and HOMO-LUMO gaps which are close to those of 1 and smaller than those of 3. In fluorescence spectra, the quantum yield of 2 increased with elongation of the pi-system (n = 2 (3.5%), 4 (19%), 6 (24%)).     

Preparation and certification of arsenate [As(V)] reference material, NMIJ CRM 7912-a

Arsenate [As(V)] solution reference material, National Metrology Institute of Japan (NMIJ) certified reference material (CRM) 7912-a, for speciation of arsenic species was developed and certified by NMIJ, the National Institute of Advanced Industrial Science and Technology. High-purity As₂O₃ reagent powder was dissolved in 0.8 M HNO₃ solution and As(III) was oxidized to As(V) with HNO₃ to prepare 100 mg kg^-1 of As(V) candidate CRM solution. The solution was bottled in 400 bottles (50 mL each). The concentration of As(V) was determined by four independent analytical techniques—inductively coupled plasma mass spectrometry, inductively coupled plasma optical emission spectrometry, graphite furnace atomic absorption spectrometry, and liquid chromatography inductively coupled plasma mass spectrometry—according to As(V) calibration solutions, which were prepared from the arsenic standard of the Japan Calibration Service system and whose species was guaranteed to be As(V) by NMIJ. The uncertainties of all the measurements and preparation procedures were evaluated. The certified value of As(V) in the CRM is (99.53 ± 1.67) mg kg^-1 (k = 2).     

Synthesis, crystal structures and photochromic properties of novel chiral Schiff base macrocycles

Enantiomerically pure and racemic forms of calixsalen-type macrocycles 1 and 2 were synthesized and their crystal structures were determined. The enantiomerically pure crystals of (S,S,S,S,S,S)-1 exhibited thermally reversible photochromism from yellow to orange-red upon photoirradiation in the solid state, while rac-crystals of 2 with the guest CH₃CN did not show any photocolouration.     

Activation of Dihydrogen by Masked Doubly Bonded Aluminum Species

Activation of dihydrogen by masked dialumenes (Al=Al doubly bonded species) is reported. Reactions of barrelene‐type dialumanes, which have the reactivity as masked equivalents of 1,2‐diaryldialumenes ArAl=AlAr, with H₂ afforded dihydroalumanes ArAlH₂ at room temperature (Ar: bulky aryl groups). These dihydroalumanes form hydrogen‐bridged dimers [ArHAl(μ‐H)]₂ in the crystalline state, while a monomer–dimer equilibrium was suggested in solution. The 1,2‐diaryldialumenes generated from the barrelene‐type dialumanes are the putative active species in the cleavage of H₂.     

CFD-PBM approach for the gas-liquid flow in a nanobubble generator with honeycomb structure

In recent years, nanobubble technologies have drawn great attention due to their wide applications in many fields of science and technology. From previous studies, a kind of honeycomb structure for high efficiency nanobubble generation has been proposed. In this paper, the numerical simulations of bubbly flow in the honeycomb structure were performed by using a computational fluid dynamics–population balance model (CFD-PBM) coupled model. The numerical model was based on the Eulerian multiphase model and the population balance model (PBM) was used to calculate the bubble size distribution. The bubble size distributions in the honeycomb structure under different work conditions were predicted. Two different drag force models (Schiller-Naumann model and Tomiyama model) and two different aggregation models (Luo model and turbulent aggregation model) were investigated. Both two drag models gave similar prediction of bubble number density distribution at the outlet. The results obtained from Luo model had better reflection of the trend of number density distribution. The turbulence dissipation rate ε can be used to evaluate the nanobubble generating ability. The water tank was not included in the CFD model in this work. The bubbles in the water tank should be studied in the future.