Ion-beam irradiation effect on solid-phase growth of β-FeSi2

Effects of Ar⁺ ion-beam irradiation on solid-phase growth of β-FeSi₂ have been investigated. Fe (10 nm)/Si structures were irradiated with 25 keV Ar⁺ (5.0×10¹⁵ cm⁻²) at a temperature of 25°C (sample A) or 400°C (sample B), and subsequently annealed at 800°C. A reference was obtained after annealing without irradiation (sample C). X-ray diffraction results indicated that β-FeSi₂ was formed after annealing at 800°C for 5 h, and the formation rate was the fastest for sample A and the slowest for sample C, i.e., A>BC. However, Auger electron spectroscopy measurements showed that atomic mixing at Fe/Si interface before annealing was B>AC. These results suggested that amorphization of Si substrate, in addition to atomic mixing, enhanced the solid-phase growth of β-FeSi₂, which was confirmed experimentally. Moreover, a direct band gap of 0.89 eV was observed for the sample with pre-amorphization by the Fourier-transform infrared (FT-IR) spectroscopy measurements. These enhancement effects were attributed to that the phase transition to β-FeSi₂ was accelerated by atomic arrangement induced during annihilation of excess vacancies. These enhancement effects can be utilized for nano-fabrication of β-FeSi₂ by using focused ion-beam irradiation.     

Accurate quantitation of salivary and pancreatic amylase activities in human plasma by microchip electrophoretic separation of the substrates and hydrolysates coupled with immunoinhibition

A high-performance determination system for alpha-amylase isoenzyme activities in human plasma involving microchip electrophoresis with a plastic chip was developed. The combination of microchip electrophoresis for substrate and hydrolysate separation and an immunoinhibition method for the differentiation of isoenzyme activities using antihuman salivary amylase (S-AMY) mAb allowed the highly selective determination of amylase isoenzyme (S-AMY and pancreatic amylase (P-AMY)) activities even in a complex matrix such as a crude plasma sample. We used 8-aminopyrene-1,3,6-trisulfonic acid (APTS)-labeled maltohexaose (G6) as a substrate. Amylase in a human plasma sample hydrolyzed APTS-G6 into APTS-maltotriose (G3) and G3, which was measured as the fluorescence intensity of APTS-G3 on microchip electrophoresis. A double logarithm plot revealed a linear relationship between amylase activity and fluorescence intensity in the range of 5-500 U/L of amylase activity (r2=0.9995, p<0.01), and the LOD was 4.38 U/L. Amylase activities in 13 subjects determined by the present method were compared with the results obtained by conventional methods with nitrophenylated oligosaccharides as substrates, respectively. Good correlations were observed for each method on simple linear regression analysis (both p<0.01). The reproducibilities of within-days for total amylase and P-AMY were 2.98-6.27 and 3.83-6.39%, respectively, and these between-days were 2.88-5.66 and 3.64-5.63%, respectively. This system enables us to determine amylase isoenzyme activities in human plasma with high sensitivity and accuracy, and thus will be applicable to clinical diagnosis.     

Sensitive determinations of stable nitrogen isotopic composition of organic nitrogen through chemical conversion into N2O

We present a method for high-sensitivity nitrogen isotopic analysis of particulate organic nitrogen (PON) in seawater and freshwater, for the purpose of determining the aquatic nitrogen fixation rate through the 15N2 tracer technique for samples that contain a low abundance of organisms. The method is composed of the traditional oxidation/reduction methods, such as the oxidation of PON to nitrate (NO3*) using persulfate, the reduction of NO3* to nitrite (NO2*) using spongy cadmium, and further reduction of NO2* to nitrous oxide (N2O) using sodium azide. Then, N2O is purged from the water and trapped cryogenically with subsequent release into a gas chromatography column to analyze the stable nitrogen isotopic composition using continuous-flow isotope ratio mass spectrometry (CF-IRMS) by simultaneously monitoring the NO+ ion currents at masses 30, 31, and 32. The nitrogen isotopic fractionation was consistent within each batch of analysis. The standard deviation of sample measurements was less than 0.3 per thousand for samples containing PON of more than 50 nmolN, and 0.5 per thousand for those of more than 20 nmolN, by subtracting the contribution of blank nitrogen, 8 +/- 2 nmol at final N2O. By using this method, we can determine delta15N for lower quantities of PON better than by other methods, so we can reduce the quantities of water samples needed for incubation to determine the nitrogen fixation rate. In addition, we can expand the method to determine the nitrogen isotopic composition of organic nitrogen in general, such as that of total dissolved nitrogen (TDN; sum of NO3*, NO2*, ammonium, and DON), by applying the method to filtrates.     

Direct excitation luminescence spectroscopy of Eu(III) complexes of 1,4,7-tris(carbamoylmethyl)-1,4,7,10- tetraazacyclododecane derivatives and kinetic studies of their catalytic cleavage of an RNA analog

The macrocycles 1,4,7-tris(carbamoylmethyl)-1,4,7,10-tetrazacyclododecane (1), 1,4,7-tris[(N-ethyl)carbamoylmethyl]-1,4,7,10-tetraazacyclododecane (2), 1,4,7-tris[(N,N-diethyl)carbamoylmethyl]-1,4,7,10-tetraazacyclododecane (3) and their Eu(III) complexes are prepared. Studies using direct Eu(III) excitation luminescence spectroscopy show that all three Eu(III) complexes exhibit only one predominant isomer with two bound waters under neutral to mildly basic conditions (Eu(X)(H(2)O)(2) for X = 1-3). There are no detectable ligand ionizations over the pH range 5.0-8.0 for Eu(3), 5.0-8.5 for Eu(2) or 5.0-9.5 for Eu(1). The three Eu(III) complexes show a linear dependence of second-order rate constants for the cleavage of 4-nitrophenyl-2-hydroxyethylphosphate (HpPNP) on pH in the range 6.5-8.0 for Eu(3), 7.0-8.5 for Eu(2) and 7.0-9.0 for Eu(1). This pH-rate profile is consistent with the Eu(III) complex-substrate complex being converted to the active form by loss of a proton and with Eu(III) water pK(a) values that are higher than 8.0 for Eu(3), 8.5 for Eu(2) and 9.0 for Eu(1). Inhibition studies show that Eu() binds strongly to the dianionic ligand methylphosphate (K(d) = 0.28 mM), and more weakly to diethylphosphate (K(d) = 7.5 mM), consistent with a catalytic role of the Eu(III) complexes in stabilizing the developing negative charge on the phosphorane transition state.     

Semiautomated detection of cerebral microbleeds in magnetic resonance images

Cerebral microbleeds (CMBs) are increasingly being recognized as an important biomarker for neurovascular diseases. So far, all attempts to count and quantify them have relied on manual methods that are time-consuming and can be inconsistent. A technique is presented that semiautomatically identifies CMBs in susceptibility weighted images (SWI). This will both reduce the processing time and increase the consistency over manual methods. This technique relies on a statistical thresholding algorithm to identify hypointensities within the image. A support vector machine (SVM) supervised learning classifier is then used to separate true CMB from other marked hypointensities. The classifier relies on identifying features such as shape and signal intensity to identify true CMBs. The results from the automated section are then subject to manual review to remove false-positives. This technique is able to achieve a sensitivity of 81.7% compared with the gold standard of manual review and consensus by multiple reviewers. In subjects with many CMBs, this presents a faster alternative to current manual techniques at the cost of some lost sensitivity.     

The mechanism of emerging catalytic activity of gold nano-clusters on rutile TiO2(110) in CO oxidation reaction

This paper reveals the fact that the O adatoms (O(ad)) adsorbed on the 5-fold Ti rows of rutile TiO(2)(110) react with CO to form CO(2) at room temperature and the oxidation reaction is pronouncedly enhanced by Au nano-clusters deposited on the above O-rich TiO(2)(110) surfaces. The optimum activity is obtained for 2D clusters with a lateral size of ～1.5 nm and two-atomic layer height corresponding to ～50 Au atoms∕cluster. This strong activity emerging is attributed to an electronic charge transfer from Au clusters to O-rich TiO(2)(110) supports observed clearly by work function measurement, which results in an interface dipole. The interface dipoles lower the potential barrier for dissociative O(2) adsorption on the surface and also enhance the reaction of CO with the O(ad) atoms to form CO(2) owing to the electric field of the interface dipoles, which generate an attractive force upon polar CO molecules and thus prolong the duration time on the Au nano-clusters. This electric field is screened by the valence electrons of Au clusters except near the perimeter interfaces, thereby the activity is diminished for three-dimensional clusters with a larger size.     

Forthcoming events 2001

Abstract

The magneto-optical spectra of the R₁ and R₂ lines of Cr³⁺ ions in alexandrite have been measured under hydrostatic pressures and magnetic fields up to 6 GPa and 15 T, respectively. The spins of the excited states, ²E, have the Heisenberg-type characters at atmospheric pressure, though the g-values are anisotropic with the values between 1.3 and 2.0. The g-values for the direction parallel to the α-axis remain unchanged with increasing pressure, while for the directions normal to the α-axis they are reduced appreciably. The fine structure parameters of spins in the ground state, ⁴A₂, exhibit quite a similar behavior. The R₁-R₂ splitting is reduced also by pressure. These properties are the evidences that the spins of the ²E states become of the king-type under pressures above about 15 GPa. The mechanism of such the change of spin character is discussed quantitatively on the basis of a crystal field model.     

3C-SiC(001)-3 × 2 reconstructed surface analyzed by high-resolution medium energy ion scattering

The atomic structure of the 3C-SiC(001)-3 × 2 reconstructed surface was analyzed precisely by high-resolution medium energy ion scattering (MEIS). The present MEIS analysis unambiguously shows that the (3 × 2) surface consists of Si adatoms (1/3 ML, 1 ML = 1.05 × 10¹⁵ atoms/cm²) on top and underlying Si adlayer (2/3 ML) on the bulk truncated Si plane. As the result, the most probable structure is focused on the Two Adlayer Asymmetric Dimer Model predicted by ab initio calculations and the modified versions with alternating long and short dimers in the 2nd adlayer proposed by photoelectron diffraction (PED) and by grazing incidence X-ray diffraction (GIXRD) analyses. Observed MEIS spectra are well reproduced by the structure relatively close to that determined by PED rather than GIXRD. Interestingly, the first principle calculations using VASP (Vienna ab initio simulation package) prefer symmetric dimers in the second Si adlayer and non-relaxed interplanar distance between the top Si and 2nd C plane of the bulk-truncated surface, which are, however, unable to reproduce the observed MEIS spectra. The distorted 2nd adlayer (asymmetric dimers) may correlate with the compressed interplanar distance between the underlying Si and C planes.