Hyper-Raman scattering enhanced by anisotropic dimer plasmons on artificial nanostructures

Silver nanodimers with a small gap of a few nanometers aligned on glass substrates were used to enhance hyper-Raman scattering of crystal violet dye molecules. When localized surface plasmon of the dimer array was resonantly excited along the interparticle axis, hyper-Raman intensity was significantly enhanced. Moreover, the spectral appearance was slightly different between the two excitation polarizations, suggesting a possibility of two resonance contributions at one-photon and two-photon energies. Since the plasmonic property of dimer arrays can be controlled by the dimer geometry, the dimer arrays are expected to be well-defined substrates for surface-enhanced hyper-Raman spectroscopy.     

Efficient photocurrent generation by SnO2 electrode modified electrophoretically with composite clusters of porphyrin-modified silica microparticle and fullerene

A silica microparticle has been successfully employed as a nanoscaffold to self-organize porphyrin and C60 molecules on a nanostructured SnO2 electrode which exhibits efficient photocurrent generation.     

Spinel–rocksalt transition as a key cathode reaction toward high-energy-density magnesium rechargeable batteries

Mg-metal-anode rechargeable battery (MRB) has been a promising candidate for next-generation batteries with high energy densities and high safety. The lack of high-performance cathode materials, however, retards the development of MRBs. In recent years, it has been revealed that various spinel oxides can accommodate a large amount of Mg, exhibiting relatively high potentials (2–3 V vs. Mg²⁺/Mg) and high capacities (～150 mAh g^?1) accompanied by the coherent structural transformation into the rocksalt structure. This review summarizes the recent progress in the development of such spinel–rocksalt transition materials from the viewpoints of the reaction mechanisms, design guidelines of spinel oxides (for tailoring the redox potential, volume change, and cyclability), and challenges to construct full-cell MRBs.     

Speciation of mercury in salmon egg cell cytoplasm in relation with metallomics research

Speciation of mercury in salmon egg cell cytoplasm was investigated by surfactant-mediated high-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICP-MS), where an ODS (octadecylsilica) column coated with a bile acid derivative, CHAPS (3-[(3-cholamidopropyl)-dimethylammonio]-1-propane sulfonate), was used for species separation. Prior to the speciation analysis, total Hg in the cell cytoplasm was determined by ICP-MS at m/z 202 in a flow injection mode. For the precise measurement, salmon egg cell cytoplasm was diluted five-fold with 0.1 M Tris (Tris(hydroxymethyl)aminomethane)-HNO₃ buffer solution, and the standard addition method was employed. Thus, the total concentration of Hg in cell cytoplasm was estimated to be 12.4 ng g⁻¹ on the wet weight basis. Next, the cell cytoplasm diluted five-fold with 0.1 M Tris-HNO₃ buffer solution was analyzed by surfactant-mediated HPLC with the dual detection system of a UV absorption detector and an ICP-MS instrument. Two peaks corresponding to some proteins and small molecules were mainly observed in those chromatograms. When salmon egg cell cytoplasm was diluted five-fold with 0.01 M Tris buffer solution or pure water, some precipitates appeared probably because of precipitation of hydrophobic proteins in cytoplasm. After the precipitates were eliminated with a membrane filter, the filtrate was subjected to the analysis by surfactant-mediated HPLC/UV/ICP-MS. As a result, the peaks for small molecular species of Hg were clearly observed at the retention time near 4.0 min (corresponding to low-molecular weight zone) in the chromatograms with UV absorption detection as well as with Hg- and S-specific ICP-MS detections. The small molecule bound with Hg was identified as cysteine through the cysteine-spiked experiment. In addition, the protein fraction on the chromatogram obtained by using the CHAPS-coated ODS column was further analyzed by SEC (size exclusion chromatography). Consequently, several protein peaks with molecular weight of 300, 50 and 12 kDa were observed in all the detections of UV absorption, Hg and Se, although two peaks among them were coincident in the case of S. These results indicate that Hg in salmon egg cell cytoplasm binds with proteins containing selenocysteine and/or cysteine residues in proteins.     

Electrochemical assembly and potential-dependent plasmon absorption of au nanoclusters covered with a 4-aminothiophenol self-assembled monolayer

Gold nanoclusters covered with 4-aminothiophenol (4-ATP) self-assembled monolayers (SAMs) were electrochemically assembled on an Au or ITO electrode. The assembly mechanism is discussed on the basis of results of electrochemical, FT-IR, and XPS measurements. The intensity of plasmon absorption of the gold nanocluster assembly was shown to be dependent on applied potential as a result of electrochemical doping/undoping of a counteranion in the polyaniline film.     

Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

Indium triflate-catalyzed vinylation of beta-ketoesters with acetylene gas

[reaction: see text]. An In(OTf)(3)-catalyzed addition of a beta-ketoester to acetylene in the presence of molecular sieves produces a alpha-vinylated ketoester in good to excellent yield. The vinylation reaction proceeds without any loss of elements in starting molecules under solvent-free conditions and allows the use of welding-grade acetylene, providing a practical method for synthetic utilization of acetylene gas.     

Catalytic [4+1] cycloaddition of alpha,beta-unsaturated carbonyl compounds with isocyanides

The GaCl(3)-catalyzed [4+1] cycloaddition reactions of alpha,beta-unsaturated ketones with isocyanides leading to lactone derivatives are described. While some other Lewis acids also show catalytic activity, GaCl(3) was the most efficient catalyst. The reaction is significantly affected by the structure of both the isocyanides and the alpha,beta-unsaturated ketones. Aromatic isocyanides, especially sterically demanding ones and those bearing an electron-withdrawing group, can be used, but aliphatic isocyanides cannot. The bulkiness of substituents at the beta-position of acyclic alpha,beta-unsaturated ketones is an important factor for the reaction to proceed efficiently. Generally, the more the bulky substituent, the higher is the yield. The reaction of alpha,beta-unsaturated ketones bearing geminal substituents at the beta-position gave the corresponding products in high yields. In monosubstituted derivatives, the yields are relatively low. However, substrates having a bulky substituent, such as a tert-Bu group, at the beta-position give high yields. Bulkiness is also required in cyclic alpha,beta-unsaturated ketones, but the effect is small. In alkyl vinyl ketones, the reactivity decreased with the steric bulk of the alkyl group. In aryl vinyl ketones, the presence of an electron-donating group on the aromatic ring decreases the reactivity. The success of the catalysis can be attributed to the low affinity of GaCl(3) toward heteroatoms, compared with usual Lewis acids.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.