A synthesis of 2-substituted 2-aminoethanol derivatives having inhibitory activity against protein kinase C.

A series of 2-aminoethanol derivatives was synthesized and their inhibitory activities against protein kinase C were investigated. Among these compounds, 2-endo-hexadecylamino-5-norbornene-2- exo-methanol (4h) and 2-endo-hexadecylamino-5-norbornene-2,3-exo-dimethanol (4i) inhibited protein kinase C at the IC50 values of 2 x 10(-5) and 1 x 10(-5) M, respectively, but not protein kinase A at a concentration of 1 x 10(-3) M. The structure-activity relationships are discussed.     

Synthesis,structure, and dynamic behavior of cyclopentadienyl-lithium, -sodium,and -potassium annelated with bicyclo[2.2.2]octene units: a systematic study on site exchange of alkali metals on a cyclopentadienyl ring in tetrahydrofuran

Novel cyclopentadienyl (Cp)-alkali metal complexes 1-M and 2-M (M = Li, Na, K), in which the Cp ring is annelated with two bicyclo[2.2.2]octene units and substituted with a phenyl group for 1 and a tert-butyl group for 2, were synthesized, and their structures and dynamic behaviors were investigated by means of X-ray crystallography, dynamic (13)C NMR, and DFT calculations. The X-ray crystallography results indicated that 1-Li, 1-Na, and 2-Na form monomeric contact ion pairs (CIP) with three THF molecules coordinated to the metal atom. Also, in THF-d(8), all of the 1-M and 2-M form monomeric CIP in the ground state. However, variable-temperature (13)C NMR measurements of 1-M and 2-M in THF-d(8) demonstrated dynamic behavior in which the metal ion exchanges positions between the upper and lower faces of the Cp ring. From a study of the concentration dependence of the dynamic behavior, the exchange was found to proceed principally as an intramolecular process at concentration ranges lower than 0.2 M. The experimentally observed deltaG values for the intramolecular exchange process for all the 1-M and 2-M (except for 2-Li, whose intramolecular process was too slow to observe) were found to be quite similar in THF-d(8) solution and to fall within the range of 12-14 kcal mol(-)(1). Within this range, a tendency was observed for the deltaG values to increase as the size of the metal decreased. Theoretical calculations (B3LYP/6-31G(d)) afforded considerably large values as the gas-phase dissociation energy for 1-M (162.7 kcal mol(-)(1) for M = Li; 131.6 kcal mol(-)(1) for M = Na; 110.9 kcal mol(-)(1) for M = K) and for 2-M (170.0 kcal mol(-)(1) for M = Li; 137.5 kcal mol(-)(1) for M = Na; 115.4 kcal mol(-)(1) for M = K). These values should be compensated for by a decrease in the solvation energies for the metal ions with increasing size, as exemplified by the calculated solvation energy for M(+)(Me(2)O)(4), which serves as a model for metal ions solvated with four molecules of THF (-122.9 kcal mol(-)(1) for M = Li; -94.7 kcal mol(-)(1) for M = Na; -67.7 kcal mol(-)(1) for M = K). This compensation results in a small difference in the overall energy for dissociation of 1-M or 2-M in ethereal solutions, thus supporting the similar deltaG values observed for the intramolecular metal exchange.     

Control of Chromophore Symmetry by Positional Isomerism of Peripheral Substituents

The first example of the control of porphyrinoid chromophore symmetry based on the positional isomerism of peripheral substituents has been achieved by preparing tetraazaporphyrins (TAPs) with C_4h, D_2h, C_2v, and C_s symmetry due to the relative arrangement of peripheral tert‐butylamino and cyano groups as push and pull substituents, respectively. The four structural isomers were successfully isolated and characterized by ¹H NMR spectroscopy and X‐ray crystallography. The band morphology in the Q‐band region varies depending on the molecular symmetry due to the significant perturbation introduced into the chromophore by the push and pull substituents. The C_4h and C_2v isomers exhibit a single Q band, whereas the Q bands of the D_2h and C_s isomers show a marked splitting. The magnetic circular dichroism spectra indicate that the push–pull TAPs retain the properties of the 16‐membered 18π‐electron perimeter generally observed for porphyrinoids. Theoretical calculations have demonstrated that the perturbation introduced by the substituents lowers the D_4h symmetry of the parent TAP π‐conjugated system, and this results in significant spectral changes. A novel approach to the fine‐tuning of the spectral properties of porphyrinoids based on changes in the chromophore symmetry is described.     

Quinolone Analogs 14: Synthesis of Antimalarial 1‐Aryl‐3‐(4‐quinolon‐2‐yl)ureas and Related Compounds

The 4‐quinolone‐2‐carbohydrazide 6a was converted into 1‐aryl‐3‐(4‐quinolon‐2‐yl)ureas 5a , 5b , 5c , 5d , 5e , 1‐aryl‐3‐(4‐quinolon‐2‐yl)imidazolidine‐2,4‐diones 9a , 9b , and N‐(4‐quinolon‐2‐yl)carbamates 10a , 10b via 4‐quinolone‐2‐carbonylazide 7a . The 4‐methoxyquinoline‐2‐carbohydrazide 6b was also transformed into 1‐aryl‐3‐(4‐methoxyquinolin‐2‐yl)ureas 11a , 11b , 11c , 11d , 1‐aryl‐3‐(4‐methoxyquinolin‐2‐yl)imidazolidine‐2,4‐diones 12a , 12b , and N‐(4‐methoxyquinolin‐2‐yl)carbamates 13a , 13b via 4‐methoxyquinoline‐2‐carbonylazide 7b . Some of the 1‐aryl‐3‐(4‐quinolon‐2‐yl)ureas 5a , 5b , 5c , 5d , 5e showed the in vitro antimalarial activity to chloroquine‐resistant Plasmodium falciparum, wherein IC₅₀ was 0.93 to 4.00 μM.     

Crystal structure of the parent misfit-layered cobalt oxide [Sr2O2]qCoO2

The crystal structure of our newly discovered Sr-Co-O phase is investigated in detail through high-resolution electron microscopy (HREM) techniques. Electron diffraction (ED) measurement together with energy dispersive X-ray spectroscopy (EDS) analysis show that an ampoule-synthesized sample contains an unknown Sr-Co-O ternary phase with monoclinic symmetry and the cation ratio of Sr/Co=1. From HREM images a layered structure with a regular stacking of a CdI₂-type CoO₂ sheet and a rock-salt-type Sr₂O₂ double-layered block is observed, which confirms that the phase is the parent of the more complex “misfit-layered (ML)” cobalt oxides of [M_mA₂O_m+2]_qCoO₂ with the formula of [Sr₂O₂]_qCoO₂, i.e. m=0. It is revealed that the misfit parameter q is 0.5, i.e. the two sublattices of the CoO₂ sheet and the Sr₂O₂ block coexist to form a commensurate composite structure. We propose a structural model with monoclinic P2₁/m symmetry, which is supported by simulations of ED patterns and HREM images based on dynamical diffraction theory.     

Synthesis of 1-(5,6-dihydro-2H-thiopyran-2-yl)uracil by a Pummerer-type thioglycosylation reaction: the regioselectivity of allylic substitution

1-(5,6-Dihydro-2H-thiopyran-2-yl)uracil derivatives, a new 4′-thio-D4-nucleoside analogue, were synthesized by reacting 5,6-dihydro-2H-thiopyran sulfoxide and persilylated uracil in a Pummerer-type thioglycosylation reaction. The reaction of 5-alkyl substituted dihydrothiopyran sulfoxide 7 only gave 1-(dihydrothiopyran-2-yl)uracil 9. On the other hand, the reaction with a 5-siloxy substituted derivative of 7 resulted in a mixture of products with the uracil moiety at either the α- or the γ-position. The use of a prolonged reaction time resulted in the exclusive formation of the 4-substituted dihydrothiopyran derivative 10. The result suggests that an equilibrium is operative in the formation of the α- and γ-adducts and that the latter should be more thermodynamically stable than the former. This conclusion was also supported by theoretical calculations.     

Dibenzylmagnesium-Initiated Anionic Oligomerizations of trans-Stilbene, 1,1-Diphenylethylene,and α-Methylstyrene in Hexamethylphosphortriamide

trans-Stilbene, 1, 1-diphenylethylene, and α-methylstyrene were allowed to react with dibenzylmagnesium to form their oligomers in hexamethylphosphortriamide (HMPA). One and two molecules of stilbene and 1, 1-diphenylethylene were incorporated into the magnesium carbon bond, and the carbanions obtained in HMPA were stable in analogy with the anionic living polymer having alkali cation as the gegenion in eithers. Intense coloration was observed during the reaction between α-methylstyrene and dibenzylmagnesium as well as in the case of stilbene and 1, 1-diphenylethylene. The low molecular weight products which were formed after a long time in the reaction between α-methylstyrene and dibenzylmagnesium were found to have no magnesium-carbon bond. It was considered that the cleavage of the propagating chain occurred gradually after the rapid propagation had proceeded to consume the monomer.     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hydrooligomerization of Butadiene with Nickel Complex Catalyst

Abstract

Oligomerization of butadiene with the catalyst system of nickel(II)chloride, electron donor, and lithium aluminum hydride or sodium borohydride has been studied. Most oligomers obtained with this catalyst were linear, and dihydrogenated dimers, trimers, and tetramers. They were n-octa-1,6-diene, n-octa-1,7-diene, n-dodeca-1,6,10-triene, and n-hexadeca-1,6,10,14-tetraene, which were identified by means of infrared, nuclear magnetic resonance, and mass spectrometry. Yields of each oligomer were strongly affected by the nature of the electron donors used. The hydrogen required for the formation of the hydrooligomers was assumed to originate from the lithium aluminum hydride or sodium borohydride used as a reducing agent. A proposed mechanism for the hydrooligomerization is that butadiene is oligomerized on the nickel atom, and the produced oligoolefins, bonded to the nickel by two terminal π-allylic bonds, are dihydrogenated to linear hydrooligomers.