Dynamic mechanism of equivalent conductivity minimum of electrolyte solution

The theory on electric conductivity of electrolyte solutions we have developed [T. Yamaguchi, T. Matsuoka, and S. Koda, J. Chem. Phys. 127, 064508 (2007)] is applied to a model electrolyte solution that shows a minimum of equivalent conductivity as the function of concentration [T. Yamaguchi, T. Akatsuka, and S. Koda, J. Chem. Phys. 134, 244506 (2011)]. The theory succeeds in reproducing the equivalent conductivity minimum, whereas the mode-coupling theory (MCT) underestimates the conductivity in the low-concentration regime. The theory can also reproduce the decrease in the relaxation time of conductivity with increasing the concentration we have demonstrated with a Brownian dynamics simulation. A detailed analysis shows that the relaxation of the conductivity occurs through two processes. The faster one corresponds to the collision between a cation and an anion, and the slower one does to the polarization of the ionic atmosphere. The increase in the equivalent conductivity with concentration is attributed to the decrease in the effect of the ionic atmosphere, which is in turn explained by the fact that the counter ion cannot penetrate into the repulsive core when the Debye screening length is compatible or smaller than the ionic diameter. The same mechanism is also observed in MCT calculation with static structure factor determined by mean-spherical approximation.     

F2-selective two-dimensional NMR spectroscopy for the analysis of minor components in foods

In this study, we propose F(2)-selective 2D NMR spectroscopy as an effective method to obtain high-quality spectra of minor components in complex foodstuffs. Selective excitation along the F(2) axis overcame the problems occurring in the conventional F(1)-selective 2D NMR spectroscopy. The technique was successfully applied to mango juice to provide high-quality TOCSY, DQF-COSY, and NOESY spectra of the minor components for the assignment of their signals. In addition, high-quality TOCSY spectra were obtained for the minor components of Japanese sake and honey. These results indicate that F(2)-selective 2D NMR spectroscopy will be useful for the non-destructive analysis of various foods.     

Ultra slow muon microscopy by laser resonant ionization at J-PARC, MUSE

As one of the principal muon beam line at the J-PARC muon facility (MUSE), we are now constructing a Muon beam line (U-Line), which consists of a large acceptance solenoid made of mineral insulation cables (MIC), a superconducting curved transport solenoid and superconducting axial focusing magnets. There, we can extract 2 × 10⁸/s surface muons towards a hot tungsten target. At the U-Line, we are now establishing a new type of muon microscopy; a new technique with use of the intense ultra-slow muon source generated by resonant ionization of thermal Muonium (designated as Mu; consisting of a μ ^?+? and an e^???) atoms generated from the surface of the tungsten target. In this contribution, the latest status of the Ultra Slow Muon Microscopy project, fully funded, is reported.     

Simple quantification of ultrasonic intensity using aqueous solution of phenolphthalein

Aqueous phenolphthalein solution under sonication was investigated for use as a chemical dosimeter. The fading time of aqueous phenolphthalein solution under sonication depended on the concentration of phenolphthalein and the pH values of solutions. The fading time was correlated to the ultrasonic intensity in a reaction vessel that is estimated on the basis of decomposition of porphyrin. The relation between the fading time and the ultrasonic intensity for different frequencies is expressed by a single curve. From these results, it is indicated that aqueous solutions of phenolphthalein is useful for simple quantification of ultrasonic intensity for practical use, and one can regard it as one of the ultrasonic intensity indicators.     

Acoustic analysis of bound rubber formed in silica/SBR compounds

The compressibility of the bound rubber around the silica particle was evaluated by an acoustic technique. The density and the longitudinal wave velocity of a silica/SBR compound were measured as a function of the silica content. The density increased linearly with the filler content. The longitudinal wave velocity was almost constant within the experimental error. The mass ratio of the bound rubber to the silica in the silica/SBR compounds was 1.08+/-0.03 kg kg(-1) which was measured by a thermal gravimetric analysis (TGA). The partial specific adiabatic compressibility of the silica was estimated as (0.1+/-0.5) x 10(-10) Pa(-1) on the basis of a three states model. The adiabatic compressibility of the bound rubbers in the silica/SBR compounds was (4.6+/-0.5) x 10(-10) Pa(-1). The compressibility was almost the same as that of the SBR, and the value was twice larger than the compressibility of the bound rubber formed in a CB/SBR composite.     

Association of amphipathic lignin derivatives with cellobiohydrolase groups improves enzymatic saccharification of lignocellulosics

Amphipathic lignin derivatives (ALDs), prepared from hardwood acetic acid lignin and softwood soda lignin via coupling with a mono-epoxylated polyethylene glycol, have been reported to improve the enzymatic saccharification efficiency of lignocellulose while maintaining significant residual cellulase activity after saccharification. We previously demonstrated that the effect of ALDs was caused by a direct interaction between ALDs and Cel6A (or CBH II). In this study, a different ALD was prepared from softwood kraft lignin in addition to aforementioned ALDs. The interactions between all the ALDs and the enzymes other than Cel6A, such as Cel7A and Cel7B, in a cellulase cocktail were investigated using surface plasmon resonance. The kraft lignin-based ALD showed the highest residual cellulase activity among all ALDs and an improved cellulolytic enzyme efficiency similar to those of the other ALDs. All ALDs were found to directly associate with major enzymes in the cellulase cocktail, Cel6A and Cel7A (or CBH I), but not with Cel7B (or EG I). In addition, the ALDs showed a much higher affinity to amino groups than to hydroxy and carboxy groups. In contrast, polyethylene glycol (molecular mass 4000 Da), one part of the ALD and a previously reported enzymatic saccharification enhancer, did not adsorb onto any enzymes in the cellulase cocktail or the amino group. Size exclusion chromatography demonstrated that the ALDs formed self-aggregates in both water and chloroform; the formation process in the latter was especially unique. Therefore, we conclude that the high residual cellulase activity is attributed to the direct association of ALD aggregates with the CBH group.     

Knight shifts for short-lived β emitters in Pt

The Knight shifts K for short-lived β emitters ¹²N and ²⁷Si implanted in Pt have been measured by means of β-NMR technique. The results were K(¹²N in Pt)= +(5.8 ± 2.1)× 10^-4 and K(²⁷Si in Pt)= +(1.4 ± 0.8)× 10^-3. The spin–lattice relaxation time T₁ was measured for ¹²N in Pt. The result was T₁(¹²N in Pt, T=300 K)= 66 ± 8 ms, thus, T₁T= 20 ± 2 Ks. The present Knight shifts are in good agreement with the KKR band structure calculation with local lattice relaxation determined theoretically. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effects of ultrasonic frequency and liquid height on sonochemical efficiency of large-scale sonochemical reactors

The sonochemical efficiency of a cylindrical sonochemical reactor has been investigated as a function of frequency and liquid height. The irradiation frequencies were 45, 129, 231 and 490 kHz. The liquid height was varied from 10 to 700 mm. The sonochemical efficiency of the cylindrical reactor was evaluated by potassium iodide (KI) dosimetry and calorimetry. In our study, the sonochemical efficiency depended on the frequency and liquid height; further, the plots of sonochemical efficiency against liquid height exhibit one or two peaks for each frequency. The sonochemical efficiency up to the first peak increased monotonically with the logarithm of the frequency, and the liquid height for the first peak was inversely proportional to the frequency. From these results, the optimum frequency for a sonochemical reactor can be determined if the liquid height is specified for scale-up of the sonochemical reactor.     

Detection of the weak-secretor rs1047781 (385A>T) single nucleotide polymorphism using an unlabeled probe high-resolution melting-based method

FUT2 encodes galactoside 2-α-l -fucosyltransferase 2 which determines the secretor status of ABO(H) blood group antigens. Secretors have at least one functional FUT2 allele (Se), while nonsecretors or weak secretors are homozygous for nonfunctional (non- or weak secretor) FUT2 alleles (se or Se^w). The Se^w having the 385A>T missense SNP (rs1047781) is the prevalent nonfunctional allele in East and Southeast Asians. In this study, we developed an unlabeled-probe high-resolution melting (HRM) analysis for genotyping of 385A>T and validated the method by analyzing 72 Japanese whose 385A>T genotypes were confirmed by DNA sequencing. The unlabeled-probe HRM analysis clearly discriminated three genotypes of 385A>T. In addition, the results obtained for the 72 Japanese by this method were fully concordant with previous ones. Estimation of secretor status using this cost-effective method may be useful in East and Southeast Asian populations.     

Total synthesis of (−)-haploscleridamine

Asymmetric total synthesis of the imidazole containing β-carboline natural product, haploscleridamine, from histidine is described. Key to the successful assembly of this alkaloid is a ring-closing metathesis reaction of an imidazole derived allylic alcohol to construct a 3-piperidinone. Application of the Buchwald-modification of the classical Fischer indolization and deprotection of the N-tosyl moiety delivered haploscleridamine.