Rapid and high-resolution analysis of geometric polyprenol homologues by connected octadecylsilylated monolithic silica columns in high-performance liquid chromatography

A Chromolith Performance octadecylsilyl (ODS) monolithic silica column (Merck) was compared with a conventional microparticulate ODS-bonded silica column in the high-performance liquid chromatography separation of natural polyprenols. A system comprising two connected monolithic columns afforded an equivalent separation at half the analysis time of the conventional method. Furthermore, ten connected columns achieved a tremendously high-resolution separation, in which the complicated series of homologous polyprenols with geometric isomerism were fully separated.     

Diffusion Mechanisms of Zeolite Catalysts

The diffusion mechanisms within zeolite catalysts, such as resistance to diffusion at pore mouths, configurational diffusion, adsorption-controlled diffusion, influence of co-existing molecules and pore blocking, were overviewed. Two kinds of diffusivities, the intracrystalline diffusivity and the effective diffusivity, were discussed separately to clarify the diffusion mechanism.     

Dehydration reactions in water. Brønsted Acid-surfactant-combined catalyst for ester,ether, thioether,and dithioacetal formation in water

Dehydration reactions in water have been realized by a surfactant-type catalyst, dodecylbenzenesulfonic acid (DBSA). These reactions include dehydrative esterification, etherification, thioetherification, and dithioacetalization. In these reactions, DBSA and substrates form emulsion droplets whose interior is hydrophobic enough to exclude water molecules generated during the reactions. Detailed studies on the esterification revealed that the yields of esters were affected by temperature, amounts of DBSA used, and the substrates. Esters were obtained in high yields for highly hydrophobic substrates. On the basis of the difference in hydrophobicity of the substrates, unique selective esterification and etherification in water were attained. Furthermore, chemospecific, three-component reactions under DBSA-catalyzed conditions were also found to proceed smoothly. This work not only may lead to environmentally benign systems but also will provide a new aspect of organic chemistry in water.     

Enhanced indoor radon concentration by using radon-rich well water in a Japanese wooden house in Fukuoka, Japan

Summary Radon measurements were carried out in a Japanese wooden house built on granitic geology, where radon-rich well water is used. Atmospheric radon concentrations were measured over one year with passive integrated radon monitors. The monitors were distributed at several locations in the house and were replaced every two months. In order to confirm the diurnal variation and heterogeneous distribution of radon, short-term measurements were carried out accordingly. Radon, its decay products and terrestrial gamma-radiations were measured in this survey. From the long-term measurement, the radon concentration in the house ranged from 14 to 184 Bq^. m^-3with an arithmetic mean of 45 Bq^. m^-3. A radon concentration of 184 Bq^. m^-3was observed in the bathroom in spring (March-May) though the radon level was normal in the living room and bedroom. In order to characterize the house, similar measurements were conducted in several surrounding houses. There was a significant difference in radon concentration between the investigated houses. There was a spatial distribution of the radon concentration and the highest value was found in the bathroom. Radon and its decay products concentrations varied with time, which increased from midnight to morning whereas they decreased during daytime. Although the radon concentration in tap water was 1 Bq^. l^-1, a high level of 353 Bq^. l^-1was found in the well water.While well water was being used, the indoor radon concentration near the bathroom increased rapidly with a maximum value of 964 Bq^. m^-3. It is clear that the use of well water enhanced the radon level around the bathroom.     

Ambident reactivity of the thiocyanate anion revisited: can the product ratio be explained by the hard soft acid base principle?

Laser flash photolysis and stopped-flow methods have been employed to determine the kinetics of the reactions of benzhydrylium ions with both termini of the thiocyanate ion. In contrast to previous investigations which reported sulfur/nitrogen ratios of k(S)/k(N) = 2-10 for the reactions of carbocations with SCN(-), values of k(S)/k(N) = 10(3)-10(4) are now derived from absolute rate constants. This discrepancy is explained by the fact that the data determined in this investigation are the first which refer to activation-controlled attack of carbocations at both termini of the thiocyanate ion, while previous reactivity ratios included diffusion-controlled reactions. It is concluded that the selectivities of the reactions of carbocations with the thiocyanate ion cannot be explained by the hard soft acid base principle.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.     

Liquid crystalline gel with refractive index gradient of curdlan

Curdlan dissolved in aqueous sodium hydroxide was dialyzed to aqueous calcium chloride to form a gel. Transparent and turbid concentric layers observed in the gel cross section perpendicular to the long axis of the dialysis tube were identified as liquid crystalline gels with refractive index gradient and amorphous gels, respectively. The thickness of each layer was proportional to the diameter of the dialysis tube, and the gelation proceeded in proportion to the root of time. The unique pattern formation was attributed to the change of curdlan conformation and calcium-induced cross-linking resulting from a diffusion of calcium cations and hydroxide anions through the dialysis tube. It is suggested that the orderedness of the curdlan molecules decreases by the increase of the curvature of the concentric liquid crystal layers as the layer comes toward the center of the dialysis tube.     

A New Family of Indoaniline-Derived Calix[4]arenes: Synthesis and Optical Recognition Properties as a Chromogenic Receptor(1)

A new family of indoaniline-derived calix[4]arenes has been synthesized for the purpose of developing a new chromogenic receptor. A condensing reaction of calix[4]arene (1) with 4-(diethylamino)-2-methylaniline hydrochloride (2) in the presence of an oxidizing agent under alkaline conditions affords mono- (3), 1,2-bis- (4), 1,3-bis- (5), and tetrakisindoaniline-derived (6) calix[4]arenes after careful column chromatography. Compound 3 is crystallized from a CHCl(3)-MeOH solution, and the crystal structure was determined by X-ray analysis. The crystal is monoclinic, space group P2(1)/n, Z = 4, a = 19.507(6) ?, b = 18.591(6) ?, c = 8.524(2) ?, beta = 94.69(2) degrees. The final R value for 2406 reflections of F(o) > 3sigma(F(o)) is 0.085. A unique intramolecular hydrogen-bonding network involving the carbonyl oxygen of indoaniline for 3 implied that the quinone carbonyl group as an acceptor of the chromophore can easily be subjected to an electrostatic interaction in the lower rim. Indeed, 1,3-bis(indoaniline)-derived 2,4-bis((ethoxycarbonyl)methoxy)calix[4]arene 7, prepared by the reaction of 5 with ethyl bromoacetate in the presence of NaH, is capable of undergoing an efficient ion-dipole interaction between the binding cation and the two quinone carbonyl groups of the chromophores, so that a selective Ca(2+)-induced pronounced color change (wavelength change > 100 nm) occurs with an association constant on the order of 10(6) in 99% EtOH, making 7 of potential use as an optical sensor for Ca(2+) detection. The IR and NMR studies have indicated that Ca(2+) is encapsulated in the cavity made by the distally located OCH(2)CO(2) groups on the lower rim of the cone-shaped calix[4]arene segment. Interestingly, however, the shape of the cavity in which Ca(2+) has been encapsulated does not have a C(2) axis of symmetry, as inferred from the (1)H-(1)H COSY experiment. On the other hand, 1,2-bis(indoaniline)-derived analogue 8 shows no response with metal ions, which can be interpreted to mean the absence of a cavity for encapsulation on the lower rim.     

Evaluation of thyroid scintigraphy in small animals

Thyroid scintigraphy in rats and mice with 99mTc and 123I was attempted to examine whether this modality might be used in small animals and to describe the possibilities of its application in examining experimentally produced thyroid diseases. A human gamma camera with a pinhole collimator improved for small animals was used for imaging. Thyroid images with 99mTc were obtained 20 minutes after injection and those with 123I were 24 hours after administration. All the scintigrams, although those obtained from mice with 99mTc displayed overlapped salivary gland images, demonstrated sufficiently clear images in size and shape, which showed that thyroid scintigraphy in small animals should be applicable in examining experimentally produced thyroid diseases.