A metabonomic investigation of the biochemical effects of mercuric chloride in the rat using 1H NMR and HPLC-TOF/MS: time dependent changes in the urinary profile of endogenous metabolites as a result of nephrotoxicity

The effects of the administration of a single dose of the model nephrotoxin mercuric chloride (2.0 mg kg(-1), subcutaneous) to male Wistar-derived rats on the urinary metabolite profiles of a range of endogenous metabolites has been investigated using (1)H NMR and HPLC-MS. Urine samples were collected daily for 9 days from both dosed and control animals. Analysis of these samples revealed marked changes in the pattern of endogenous metabolites as a result of HgCl(2) toxicity. Peak disturbances in the urinary metabolite profiles were observed (using both NMR and HPLC-MS) at 3 days post dose. Thereafter the urinary metabolite profile gradually returned to a more normal composition. Markers of toxicity identified by (1)H NMR spectroscopy were raised concentrations of lactate, alanine, acetate, succinate, trimethylamine (TMA), and glucose. Reductions in the urinary excretion of citrate and alpha-ketoglutarate were also seen. Markers identified by HPLC-MS, in positive ion mode, were kynurenic acid, xanthurenic acid, pantothenic acid and 7-methylguanine which decreased after dosing. In addition an ion at m/z 188, probably 3-amino-2-naphthoic acid, was observed to increase after dosing. As well as these identified compounds other ions at m/z 297 and 267 decreased after dosing. In negative ion mode a range of sulfated compounds were observed, including phenol sulfate and benzene diol sulfate, which decreased after dosing. As well as the sulfated components an unidentified glucuronide at m/z 326 was also observed to decrease after dosing. The results of this study demonstrate the complementary nature of the NMR and MS-based techniques for metabonomic analysis.     

Sulfonamides as novel terminators of cationic cyclisations

Trifluoromethanesulfonic (triflic) acid is an excellent catalyst for inducing overall 5-endo cyclisation of homoallylic sulfonamides [e.g. 4] to give pyrrolidines [e.g. 5]. In competitive experiments, pyrrolidines or homopiperidines are formed in preference to piperidines, even when the latter would be obtained by trapping a tertiary carbocation. Cationic cascades terminated by a sulfonamide group are viable for the efficient formation of polycyclic systems.     

An electronic spectroscope for classroom displays of visible spectra

This article is an electronic publication in Spectrochimica Acta Electronica (SAE), a section of Spectrochimica Acta Part B (SAB). The hardcopy text is accompanied by an electronic archive, stored on the SAE homepage at http://www.elsevier.nl/locate/sabe. The archive contains program, data and text files. The hardcopy text describes a program that has been developed to accept data from a compact electronic spectrograph and translate the data into a display on a computer screen. The computer display mimics the view seen through a direct vision spectroscope. Atomic spectra appear as vertical lines of the appropriate color dispersed on a black field. A conventional plot of intensity versus wavelength is simultaneously displayed. The update of the display is sufficiently rapid that the image on the screen is essentially a real-time representation of the light entering the spectrograph. The system was designed for use in conjunction with video projection equipment in demonstrations to large groups of students.     

Energy transfer dynamics in Re(I)-based polynuclear assemblies: a quantitative application of Förster theory

The synthesis, structure, and photophysical properties of a new family of tetranuclear FeRe 3 chromophore-quencher complexes having the general form [Fe(pyacac) 3(Re(bpy')(CO) 3) 3](OTf) 3 (where pyacac = 3-(4-pyridyl)-acetylacetonate and bpy' is 4,4',5,5'-tetramethyl-2,2'-bipyridine (tmb, 1), 2,2'-bipyridine (bpy, 2), and 4,4'-diethylester-2,2'-bipyridine (deeb, 3)) are reported. Time-resolved emission data acquired in room-temperature CH 2Cl 2 solutions exhibited single exponential decay kinetics with observed lifetimes of 450 +/- 30 ps, 755 +/- 40 ps, and 2.5 +/- 0.1 ns for complexes 1, 2, and 3, respectively. The emission in each case is assigned to the decay of the Re (I)-based (3)MLCT excited state; the lifetimes are all significantly less than the corresponding AlRe 3 analogues (2250 +/- 100 ns, 560 +/- 30 ns, and 235 +/- 20 ns for 4, 5, and 6, respectively), which were also prepared and characterized. Electron transfer is found to be thermodynamically unfavorable for all three Re (I)-containing systems: this fact coupled with the absence of optical signatures for the expected charge-separated photoproducts in the time-resolved differential absorption spectra and favorable spectral overlap between the donor emission and the acceptor absorption profiles implicates dipolar energy transfer from the Re (I)-based excited state to the high-spin Fe (III) core as the dominant quenching pathway in these compounds. Details obtained from the X-ray structural data of complex 2 allowed for a quantitative application of Forster energy transfer theory by systematically calculating the separation and spatial orientation of the donor and acceptor transition moment dipoles. Deviations between the calculated and observed rate constants for energy transfer were less that a factor of 3 for all three complexes. This uncommonly high degree of precision testifies to both the appropriateness of the Forster model as applied to these systems, as well as the accuracy that can be achieved in quantifying energy transfer rates if relative dipole orientations can be accounted for explicitly.     

Multimetallic assemblies using piperazine-based dithiocarbamate building blocks

Treatment of cis-[RuCl2(dppm)2] (dppm = bis(diphenylphosphino)methane) with dithiocarbamates, NaS2CNR2 (R = Me, Et) and [H2NC5H10][S2CNC5H10], yields cations [Ru(S2CNR2)2(dppm)2](+) and [Ru(S2CNC5H10)2(dppm)2](+), respectively. The zwitterions S2CNC4H8NHR (R = Me, Et) react with the same metal complex in the presence of base to yield [Ru(S2CNC4H8NR)(dppm)2](+). Piperazine or 2,6-dimethylpiperazine reacts with carbon disulfide to give the zwitterionic dithiocarbamate salts H2NC4H6(R2-3,5)NCS2 (R = H; R = Me), which form the complexes [Ru(S2CNC4H6(R2-3,5)NH2)(dppm)2](2+) on reaction with cis-[RuCl2(dppm)2]. Sequential treatment of [Ru(S2CNC4H8NH2)(dppm)2](2+) with triethylamine and carbon disulfide forms the versatile metalla-dithiocarbamate complex [Ru(S2CNC4H8NCS2)(dppm)2] which reacts readily with cis-[RuCl2(dppm)2] to yield [{Ru(dppm)2}2(S2CNC4H8NCS2)]. Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with [Os(CH=CHC6H4Me-4)Cl(CO)(BTD)(PPh3)2] (BTD = 2,1,3-benzothiadiazole), [Pd(C6H4CH2NMe2)Cl]2, [PtCl2(PEt3)2], and [NiCl2(dppp)] (dppp = 1,3-bis(diphenylphosphino)propane) results in the heterobimetallic complexes [(dppm)2Ru(S2CNC4H8NCS2)ML(n))](m+) (ML(n) = Os(CH=CHC6H4Me-4)(CO)(PPh3)2](+), m = 1; ML(n) = Pd(C,N-C6H4CH2NMe2), m = 1; ML(n) = Pt(PEt3)2, m = 2; ML(n) = Ni(dppp), m = 2). Reaction of [NiCl2(dppp)] with H2NC4H8NCS2 yields the structurally characterized compound, [Ni(S2CNC4H8NH2)(dppp)](2+), which reacts with base, CS2, and cis-[RuCl2(dppm)2] to provide an alternative route to [(dppm)2Ru(S2CNC4H8NCS2)Ni(dppp)](+). A further metalla-dithiocarbamate based on cobalt, [CpCo(S2CNC4H8NH2)(PPh3)](2+), is formed by treatment of CpCoI2(CO) with S2CNC4H8NH2 followed by PPh3. Further reaction with NEt3, CS2, and cis-[RuCl2(dppm)2] yields [(Ph3P)CpCo(S2CNC4H8NCS2)Ru(dppm)2](2+). Heterotrimetallic species of the form [{(dppm)2Ru(S2CNC4H8NCS2)}2M](2+) result from the reaction of [Ru(S2CNC4H8NCS2)(dppm)2] and M(OAc)2 (where M = Ni, Cu, Zn). Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with Co(acac)3 and LaCl3 results in the formation of the compounds [{(dppm)2Ru(S2CNC4H8NCS2)}3Co](3+) and [{(dppm)2Ru(S2CNC4H8NCS2)}3La](3+), respectively. The electrochemical behavior of selected examples is also reported.     

Synthesis of glycerol carbonate from glycerol and urea with gold-based catalysts

The reaction of glycerol with urea to form glycerol carbonate is mostly reported in the patent literature and to date there have been very few fundamental studies of the reaction mechanism. Furthermore, most previous studies have involved homogeneous catalysts whereas the identification of heterogeneous catalysts for this reaction would be highly beneficial. This is a very attractive reaction that utilises two inexpensive and readily available raw materials in a chemical cycle that overall, results in the chemical fixation of CO(2). This reaction also provides a route to up-grade waste glycerol produced in large quantities during the production of biodiesel. Previous reports are largely based on the utilisation of high concentrations of metal sulfates or oxides, which suffer from low intrinsic activity and selectivity. We have identified heterogeneous catalysts based on gallium, zinc, and gold supported on a range of oxides and the zeolite ZSM-5, which facilitate this reaction. The addition of each component to ZSM-5 leads to an increase in the reaction yield towards glycerol carbonate, but supported gold catalysts display the highest activity. For gold-based catalysts, MgO is the support of choice. Catalysts have been characterised by XRD, TEM, STEM and XPS, and the reaction has been studied with time-on-line analysis of products via a combination of FT-IR spectroscopy, HPLC, (13)C NMR and GC-MS analysis to evaluate the reaction pathway. Our proposed mechanism suggests that glycerol carbonate forms via the cyclization of a 2,3-dihydroxypropyl carbamate and that a subsequent reaction of glycerol carbonate with urea yields the carbamate of glycerol carbonate. Stability and reactivity studies indicate that consecutive reactions of glycerol carbonate can limit the selectivity achieved and reaction conditions can be selected to avoid this. The effect of the catalyst in the proposed mechanism is discussed.     

Controlling the duality of the mechanism in liquid-phase oxidation of benzyl alcohol catalysed by supported Au-Pd nanoparticles

In the solvent-free oxidation of benzyl alcohol to benzaldehyde using supported gold-palladium nanoparticles as catalysts, two pathways have been identified as the sources of the principal product, benzaldehyde. One is the direct catalytic oxidation of benzyl alcohol to benzaldehyde by O(2), whereas the second is the disproportionation of two molecules of benzyl alcohol to give equal amounts of benzaldehyde and toluene. Herein we report that by changing the metal oxide used to support the metal-nanoparticles catalyst from titania or niobium oxide to magnesium oxide or zinc oxide, it is possible to switch off the disproportionation reaction and thereby completely stop the toluene formation. It has been observed that the presence of O(2) increases the turnover number of this disproportionation reaction as compared to reactions in a helium atmosphere, implying that there are two catalytic pathways leading to toluene.     

Improved partition efficiency with threaded cylindrical column in vortex counter-current chromatography

Type-I coil planet centrifuge produces a uniformly circulating centrifugal force field to produce vortex motion of two immiscible solvent phases in a cylindrical cavity of the separation column to perform efficient countercurrent chromatography. The partition efficiency obtained from the original vortex column was substantially improved by threading the cylindrical cavity to increase the area of mass transfer between the two phases. Partition efficiency of the threaded column was evaluated by three different two-phase solvent systems with a broad range of hydrophobicity each with a set of suitable test samples. Overall results of the present studies indicated that the threaded cylindrical column substantially improves the partition efficiency in terms of theoretical plate number, peak resolution, and height equivalent of one theoretical plate. The results also indicated that higher peak resolution is produced by eluting either the upper phase in the head to tail direction or the lower phase in the reversed direction. When there is a choice in the mobile phase, a better separation is achieved by using the less viscous phase as the mobile phase. Since the present system gives extremely low column pressure, it may be a potential alternative to the conventional type-J HSCCC system for a large-scale preparative separation.     

Preparative isolation of (+)-beta-eudesmol fromAmyris balsamifera

Summary Optically pure (+)-beta-eudesmol is a possible starting material for the synthesis of several termite defense compounds. A two step procedure for the isolation of gram quantities of (+)-beta-eudesmol from commercially availableAmyris balsamifera oil (syn. West Indian sandalwood oil), containing 8% beta-eudesmol, was developed. Step one consisted of an efficient vacuum distillation of the total oil. Step two was a medium pressure LC separation with an AgNO₃ impregnated silica gel stationary phase. Several other separation procedures failed due to the presence of many closely related sesquiterpene alcohols (75% of the oil).