Statistical investigations of interferences in graphite furnace atomic absorption spectroscopy

Summary Interferences in the flameless determination of cadmium using the HGA 72 were studied for HCl, HNO₃, H₂SO₄, HClO₄ and HF and found to be depending on different thermal pretreatment. The interferences of cations were much smaller than for anions. The results are discussed with respect to thermal stability as well as atomization rate of the compositions under investigation. Special emphasis is put upon the presence of interactions between interferents, which in some cases can be used to eliminate interferences.

---

Statistische Untersuchungen über Störungen bei der flammenlosen AtomabsorptionsspektralphotometrieII. Cadmium

Zusammenfassung Interferenzen, die bei der flammenlosen Bestimmung von Cadmium in der HGA 72 auftreten, wurden bei HCl, HNO₃, H₂SO₄, H₃PO₄, HClO₄ und HF studiert; die AbhÄngigkeit ihres Auftretens von der thermischen Vorbehandlung wird gezeigt. Interferenzen von Kationen sind kleiner. Die Ergebnisse werden im Hinblick auf die thermische StabilitÄt und die Atomisierungsgeschwindigkeit der Proben diskutiert. Besonders betont wird die Gegenwart von Wechselwirkungen zwischen Störungen, die manchmal auch benützt werden können, um Interferenzen auszuschalten.

Part I: Z. Anal. Chem. [10]     

Angle-resolved photoemission and valence band dispersions for GaAs: Direct vs indirect models

Angle-resolved photoemission measurements for GaAs(110) have been extended to hv= 100 eV. These results show that dominant emission peaks are due to direct transitions. Weaker one-dimensional density of states features sometimes observed are due to surface umklapp/secondary cone and lifetime effects. Accurate band dispersions

for all four valence bands GaAs along the [110] direction are given using simple normal emission and off-normal emission methods. Electron and hole lifetimes are directly determined.     

MODs vs. NPs: Vying for the Future of Printed Electronics

This Minireview compares two distinct ink types, namely metal-organic decomposition (MOD) and nanoparticle (NP) formulations, for use in the printing of some of the most conductive elements: silver, copper and aluminium. Printing of highly conductive features has found purpose across a broad array of electronics and as processing times and temperatures reduce, the avenues of application expand to low-cost flexible substrates, materials for wearable devices and beyond. Printing techniques such as screen, aerosol jet and inkjet printing are scalable, solution-based processes that historically have employed NP formulations to achieve low resistivity coatings printed at high resolution. Since the turn of the century, the rise in MOD inks has vastly extended the range of potentially applicable compounds that can be printed, whilst simultaneously addressing shelf life and sintering issues. A brief introduction to the field and requirements of an ink will be presented followed by a detailed discussion of a wide array of synthetic routes to both MOD and NP inks. Unindustrialized materials will be discussed, with the challenges and outlook considered for the market leaders: silver and copper, in comparison with the emerging field of aluminium inks.     

Differential geometric analysis of alterations in MH α‐helices

Antigen presenting cells present processed peptides via their major histocompatibility (MH) complex to the T cell receptors (TRs) of T cells. If a peptide is immunogenic, a signaling cascade can be triggered within the T cell. However, the binding of different peptides and/or different TRs to MH is also known to influence the spatial arrangement of the MH α‐helices which could itself be an additional level of T cell regulation. In this study, we introduce a new methodology based on differential geometric parameters to describe MH deformations in a detailed and comparable way. For this purpose, we represent MH α‐helices by curves. On the basis of these curves, we calculate in a first step the curvature and torsion to describe each α‐helix independently. In a second step, we calculate the distribution parameter and the conical curvature of the ruled surface to describe the relative orientation of the two α‐helices. On the basis of four different test sets, we show how these differential geometric parameters can be used to describe changes in the spatial arrangement of the MH α‐helices for different biological challenges. In the first test set, we illustrate on the basis of all available crystal structures for (TR)/pMH complexes how the binding of TRs influences the MH helices. In the second test set, we show a cross evaluation of different MH alleles with the same peptide and the same MH allele with different peptides. In the third test set, we present the spatial effects of different TRs on the same peptide/MH complex. In the fourth test set, we illustrate how a severe conformational change in an α‐helix can be described quantitatively. Taken together, we provide a novel structural methodology to numerically describe subtle and severe alterations in MH α‐helices for a broad range of applications. © 2013 Wiley Periodicals, Inc.     

Mono-Triflation of Carbohydrate Diols and Triols

ABSTRACT

For five carbohydrate substrates [methyl 4,6-O-(phenylmethylene)-1-thio-α-D-glucopyranoside 1a, 1-cyano-1-deoxy-4,6-O-(phenylmethylene)-α-D-galactopyranose 2a, methyl α-D-xylopyranoside 3a, methyl β-D-arabinopyranoside 4a, and methyl 5-O-(tert-butyldiphenylsilyl)-α-D-ribofuranoside 5a], selective mono-triflation was achieved where the reacting hydroxyl is cis and vicinal to a heteroatom.     

Quantum‐Chemical and Electrochemical Investigation of the Electrochemical Windows of Halogenated Carborate Anions

The range of electrochemical stability of a series of weakly coordinating halogenated (Hal=F, Cl, Br, I) 1‐carba‐closo‐dodecaborate anions, [1‐R‐CB₁₁X₅Y₆]^? (R=H, Me; X=H, Hal, Me; Y=Hal), has been established by using quantum chemical calculations and electrochemical methods. The structures of the neutral and dianionic radicals, as well as the anions, have been optimized by using DFT calculations at the PBE0/def2‐TZVPP level. The calculated structures are in good agreement with existing experimental data and with previous calculations. Their gas‐phase ionization energies and electron affinities were calculated based on their optimized structures and were compared with experimental (cyclic and square‐wave) voltammetry data. Electrochemical oxidation was performed in MeCN at room temperature and in liquid sulfur dioxide at lower temperatures. All of the anions show a very high resistance to the onset of oxidation (2.15–2.85 V versus Fc^0/+), with only a minor dependence of the oxidation potential on the different halogen substituents. In contrast, the reduction potentials in MeCN are strongly substituent dependent (?1.93 to ?3.32 V versus Fc^0/+). The calculated ionization energies and electron affinities correlate well with the experimental redox potentials, which provide important verification of the thermodynamic validity of the mostly irreversible redox processes that are observed for this series. The large electrochemical windows that are afforded by these anions indicate their suitability for electrochemical applications, for example, as supporting electrolytes.     

Optimal spin squeezing inequalities detect bound entanglement in spin models

We determine the complete set of generalized spin squeezing inequalities. These are entanglement criteria that can be used for the experimental detection of entanglement in a system of spin-1/2 particles in which the spins cannot be individually addressed. They can also be used to show the presence of bound entanglement in the thermal states of several spin models.     

Stereoelectronic Features of a Complex Ketene Dimerization Reaction

The amidation reaction of a tetrahydroisoquinolin-1-one-4-carboxylic acid is a key step in the multi-kilogram-scale preparation of the antimalarial drug SJ733, now in phase 2 clinical trials. In the course of investigating THIQ carboxamidations, we found that propanephosphonic acid anhydride (T3P) is an effective reagent, although the yield and byproducts vary with the nature and quantity of the base. As a control, the T3P reaction of a 3-(2-thienyl) THIQ was performed in the absence of the amine, and the products were characterized: among them are three dimeric allenes and two dimeric lactones. A nucleophile-promoted ketene dimerization process subject to subtle steric and stereoelectronic effects accounts for their formation. Two novel monomeric products, a decarboxylated isoquinolone and a purple, fused aryl ketone, were also isolated, and mechanisms for their formation from the ketene intermediate are proposed.     

Iodine determination in biological materials Options for sample preparation and final determination

This paper describes the development of various new acid sample decomposition methods, as well as an extraction (leaching) method and compares them with the “Sch?niger Combustion” technique. The methods have been developed as sample preparation techniques for iodine determination in biological materials, especially in solid samples. ICP-MS (inductively coupled plasma mass spectrometry) and a catalytic technique are employed and discussed for the final determination of iodine concentrations. Accuracy and reliability of the different analytical methods are shown in the examples of different CRMs (certified reference materials) available for iodine. The results of an interlaboratory comparison are specifically presented for the extraction (leaching) method. Received: 11 May 1998 / Revised: 14 June 1998 / Accepted: 16 June 1998     

3,4-Dihydroxy-7,8-dihydro-beta-ionone 3-O-beta-D-glucopyranoside and other glycosidic constituents from apple leaves

3,4-Dihydroxy-7,8-dihydro-beta-ionone 3-O-beta-D-glucopyranoside 1 has been isolated from a methanolic extract of apple (Malus domestica) leaves by XAD-2 adsorption chromatography and subsequent purification by high speed countercurrent chromatography (HSCCC) and HPLC. Under acidic conditions this glycoside gives rise to a number of volatile compounds including 1,1,6-trimethyl-1,2-dihydronaphthalene (TDN) 2, which is known as an off-flavor compound in wine. In the course of the study, six additional glycoconjugates were isolated from apple leaves, i.e. roseoside 3, 3-oxo-alpha-ionol beta-D-glucopyranoside 4, benzoic acid beta-D-glucose ester 5, kaempferol 3-O-rhamnoside 6, (+)-syringaresinol beta-D-glucopyranoside 7 and 4-hydroxy-5-(3'-methyl-2'-butenyl)-benzoic acid methylester 3-beta-D-glucopyranoside 8. The latter compound has been isolated for the first time in nature. In order to avoid the 'kerosene-off-flavor' caused by TDN, the methanolic extract has been subjected to yeast fermentation. This treatment reduced the amount of TDN formed and resulted in an improved flavor impression of the methanolic extract.