Electrochemical texturing of Al-doped ZnO thin films for photovoltaic applications

The processes during chemical and electrochemical etching of Al-doped ZnO are investigated utilizing a scanning flow cell setup with online detection of dissolved Zn ions. The rate of chemical dissolution was found to be a linear function of buffer and proton concentration in near neutral pH solutions according to a transport limited reaction. In contrast, electrochemical etching is limited by the kinetics of the reaction and increases linearly with the imposed current density. Due to this fundamental difference, the dissolution of Zn can be either uniform over the whole surface or highly localized at active sites like grain boundaries. A combined approach of chemical etching and the well-controllable galvanostatic dissolution thus allows a fine adjustment of the ZnO:Al surface texture for applications in silicon thin film photovoltaic cells in order to improve their overall energy conversion efficiency.     

Studies on intramolecular nh-bridging in aromatic compounds. Part 3 [1–3]

A study was made of the use of calcium oxide as a catalyst at a temperature of 400–700° for the dehy-drocyclization of four primary arylamines: 2-aminobiphenyl, 1-aminotriphenylene (5c) , 2-phenoxyaniline, and N-(2-aminophenyl)pyrrole. Maximal yields of cyclized products isolated were 53% (carbazole), 52% (4H-naphtho[1,4-def]carbazole), 18% (phenoxazine), and 0%, respectively. Comparison is made with reported cyclizations of the corresponding nitro and azido starting materials. In one case, treatment of I-nitrotriphenylene with triethyl phosphite produced mainly diethyl N-(1-triphenylenyl)phosphoramidate (51%). Mono- and hemihydrochlorides of 5c are described. A mechanism for the catalyzed dehydrocy-clization is proposed.     

An Analytical Method for the Separation and Determination of As(III) and As(V) in Seepage and Acid Mine Drainage Water

To avoid changes in the original As species distribution in natural water after sampling, a method of immediate separation of As(V) by anion exchange at the sampling site was developed. The procedure consists of two steps. The total concentration of arsenic is determined in one part of the water sample acidified on site. Another part of the water samples is pressed through a column filled with an anion exchanger. The As(III) species that is not redox-stable remains in the effluent of the sorbents column and can be analyzed with conventional methods after stabilization by addition of conc. HNO₃. As(V) is sorbed by the exchanger material. The As(V) concentration can be calculated as the difference between As_sol and As(III), neglecting very low contents of methylated species. Oxidation of Fe(II) by air followed by co-precipitation of arsenic with iron hydroxide was applied in field experiments to minimize the As concentration in seepage and mining water.     

Preparative and 1H NMR Investigation on Regioselective Silylation of Starch Dissolved in Dimethyl Sulfoxide

Reaction of starch 1 dissolved in dimethyl sulfoxide (DMSO) with bulky thexyldimethylchlorosilane (TDSCl) in the presence of pyridine leads to regioselectively functionalized silyl ethers with a degree of substitution (DS) up to 1.8. The control of the DS_Si, of the regioselectivity, and of the reaction pathway is described in detail. The reaction proceeds homogeneously up to DS_Si of 0.6. With ongoing silylation the polymers form a separate phase incorporating the silylating agent to form TDS‐starches with DS_Si values higher than 1.0. After peracetylation of the silyl starches, the substitution pattern has been characterized not only in the anhydroglucose repeating units (AGU) but also in the non‐reducing terminal end groups (TEG) by means of two‐dimensional ¹H NMR techniques. Up to DS_Si 1.0, a very high regioselective functionalization of the primary 6‐OH groups in the AGU as well as in the TEG is detectable. With increasing silylation (DS_Si > 1.0), the subsequent silylation takes place at the 2‐OH groups of the AGU and at the 3‐OH groups of the TEG. These results are compared with our own investigations on the silylation of starch in the reaction system N‐methylpyrrolidone (NMP)/ammonia and on the silylation of cellulose in N,N‐dimethylacetamide (DMA)/LiCl/pyridine solution.     

‘Non-Koopmans’ States in Stilbene Cations and a Remarkable Example to the «SDT-Equation»: Indeno [2,1-a]indene

The radical cations of indeno [2, 1-a]indene ( 1 ), stilbene ( 2 ) and 3, 5, 3', 5'-tetramethylstilbene ( 3 ) were prepared by γ-irradiation of the neutral precursors in an electron-scavenging matrix at 77 K . Their electronic spectra were recorded and compared to the photoelectron spectra ( PE .) of the neutral precursors. The results show that either the fourth or the fifth excited doublet state of the cations is of «Non-Koopmans» type, with specific doublet energy (D) D (²B_g)=2.74 eV ( 1 ⁺), =2.59 eV ( 2 ⁺), =2.49 eV ( 3 ⁺). Remarkably, 1 ⁺ possesses two electronic states in the 2.7-2.8 eV energy range: ²A_u («Koopmans»-type) and ²B_g («Non -Koopmans»-type). The «SDT»-equation \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm D} = \sqrt {{\rm S} \cdot {\rm T}} $\end{document} approximately connecting excited singlet (S) and triplet (T) states of a neutral alternant system with the excited doublet (D) states of its radical cation - provided e-promotion occurs For all three excited states between the same (paired) orbitals-is satisfyingly exemplified by 1 : S¹ = 3.92 eV and T¹= 2.06 eV for 1 , D^{4 or 5}=2.74 eV for 1 ⁺.     

Synthesis of an s-butyldibenz[a,h]acridine. Alkyl migration in the bernthsen reaction

The Bernthsen reaction between N-1-naphthyl-2-naphthylamine and 2-methylbutanoic acid and its anhydride at 200–230° for seven hours gives a low yield of 12- or 13-s-butyldibenz[a,h]acridine, instead of the expected 14-isomer. The parent molecule dibenz[a,h]acridine results from the same reaction conducted at 270° for thirteen hours. It is suggested that alkyl migration may have occurred in some other cases where the Bernthsen reaction was reported to yield 14-alkyldibenz[a,h]acridines.     

A note on fundamental,non-fundamental,and robust cycle bases

In many biological systems, robustness is achieved by redundant wiring, and reflected by the presence of cycles in the graphs connecting the systems’ components. When analyzing such graphs, cyclically robust cycle bases of are of interest since they can be used to generate all cycles of a given 2-connected graph by iteratively adding basis cycles. It is known that strictly fundamental (or Kirchhoff) bases, i.e., those that can be derived from a spanning tree, are not necessarily cyclically robust. Here we note that, conversely, cyclically robust bases (even of planar graphs) are not necessarily fundamental. Furthermore, we present a class of cubic graphs for which cyclically robust bases can be explicitly constructed.     

Torus Knots and the Topological Vertex

We propose a class of toric Lagrangian A-branes on the resolved conifold that is suitable to describe torus knots on S ³. The key role is played by the \({SL(2, \mathbb{Z})}\) transformation, which generates a general torus knot from the unknot. Applying the topological vertex to the proposed A-branes, we rederive the colored HOMFLY polynomials for torus knots, in agreement with the Rosso and Jones formula. We show that our A-model construction is mirror symmetric to the B-model analysis of Brini, Eynard and Mariño. Compared to the recent proposal by Aganagic and Vafa for knots on S ³, we demonstrate that the disk amplitude of the A-brane associated with any knot is sufficient to reconstruct the entire B-model spectral curve. Finally, the construction of toric Lagrangian A-branes is generalized to other local toric Calabi–Yau geometries, which paves the road to study knots in other three-manifolds such as lens spaces.     

Mirror symmetry,mirror map and applications to Calabi-Yau hypersurfaces

Mirror Symmetry, Picard-Fuchs equations and instanton corrected Yukawa couplings are discussed within the framework of toric geometry. It allows to establish mirror symmetry of Calabi-Yau spaces for which the mirror manifold had been unavailable in previous constructions. Mirror maps and Yukawa couplings are explicitly given for several examples with two and three moduli.On leave of absence from Dept. of Math., Toyama Univ., Toyama 930, Japan (address after Sept. 1, 1993)Address after Oct. 1, 1993: Dept. of Math., Harvard Univ., Cambridge, MA 02138, USA. after April 1, 1994: CERN, Theory Division, CH-1211 Geneva 23, Switzerland     

Analytische Chemie heute

Ohne Zusammenfassung