The photochemical reaction cycle of retinal reconstituted bacteriorhodopsin

The function of three types of bacteriorhodopsins was compared: the wild-type, the bleached and retinal reconstituted and retinal deficient bacteriorhodopsin after retinal addition. The apparent pK(a) of the proton acceptor group for the bleached BR and retinal deficient BR shifted toward higher pH values compared to the wild-type BR. Fitting the photocycle model to the absorption kinetic signals for all three proteins showed the existence of the same intermediates, but the time-dependent concentration of the intermediates was different. Although measurements were made at pH 7, the absorption kinetics and photoelectric signals in both retinal reconstituted samples acted as wild-type bacteriorhodopsin at significantly higher pH. Below pH 3 the retinal deficient and reconstituted sample bleached. These results suggested that the added retinal was not able to rebind in the same position in the protein as in native bacteriorhodopsin. This points out that care should be taken, when bleached bacteriorhodopsin is reconstituted with different retinal analogs.     

Carbon incorporation in Pd(111) by adsorption and dehydrogenation of ethene

The decomposition of ethene on the Pd(111) surface was studied at effective pressures in the 10(-8) to 10(-7) mbar range and at sample temperatures between 300 and 700 K, using an effusive capillary array beam doser for directional adsorption, LEED, AES, temperature programmed reaction, and TDS. In the temperature range of 350-440 K increasingly stronger dehydrogenation of the ethene molecule is observed. Whereas at 350 K an ethylidyne adlayer is still present after adsorption, already at temperatures around 440 K complete coverage of the surface by carbon is attained, while the bulk still retains the properties of pure Pd. Beyond 440 K a steady-state surface C coverage is established, which decreases with temperature and is determined by detailed balancing between the ethene gas-phase adsorption rate and the migration rate of carbon into the Pd bulk. This process gives rise to the formation of a "partially carbon-covered Pd(x)C(y) surface". Above 540 K the surface-bulk diffusion of adsorbed carbon becomes fast, and in the UHV experiment the ethene adsorption rate becomes limited by the ethene gas-phase supply. The carbon bulk migration rate and the steady-state carbon surface coverage were determined as a function of the sample temperature and the ethene flux. An activation energy of 107 kJ mol(-1) for the process of C diffusion from surface adsorption sites into the subsurface region was derived in the temperature range of 400-650 K by modeling the C surface coverage as a function of temperature on the basis of steady-state reaction kinetics, assuming a first-order process for C surface-subsurface diffusion and a second-order process for C(ads) formation by dissociative C2H4 adsorption.     

Monosaccharides as silicon chelators: pentacoordinate bis(diolato)(phenyl)silicates with the cis-furanose isomers of common pentoses and hexoses

Five-coordinate phenylsilicates are formed from the reaction of trimethoxy(phenyl)silane with monosaccharides in methanol in the presence of a stoichiometric amount of base. Five complexes have been isolated and characterized with two ketoses and three aldopentoses. The silicon central atom in [K([18]crown-6)][PhSi(beta-D-Fruf 2,3H-2)2].MeOH (1, Fru=fructose) is part of two chelate rings, with the ligands being beta-D-fructofuranose-O2,O3 dianions. The beta-furanose isomer is best suited for silicon ligation because it exhibits a torsion angle close to 0 degrees for the most acidic diol function, thus assuring a flat chelate ring. The same structural principles are also found in [K([18]crown-6)][PhSi(beta-D-Araf1,2H-2)2].2 MeOH (2, Ara=arabinose), [K([18]crown-6)][PhSi(alpha-D-Ribf1,2H-2)2] (3, Rib=ribose), [K([18]crown-6)][PhSi(alpha-D-Xylf1,2H-2)2]. acetone (4, Xyl=xylose), and [K([18]crown-6)][PhSi(alpha-D-Rulf2,3H-2)2] (5, Rul=ribulose).     

Reaction of 3‐Hydroxyquinoline‐2,4‐diones with Inorganic Thiocyanates in the Presence of Ammonium or Alkylammonium Ions: the Unexpected Replacement of a Hydroxy Group by an Amino Group

3‐Hydroxyquinoline‐2,4‐diones react with KSCN in the presence of the NH$\rm{{_{4}^{+}}}$ ions to generate 2,3‐dihydro‐3‐thioxoimidazo[1,5‐c]quinazolin‐5(6H)‐ones, 2,3‐dihydro‐2‐thioxo‐1H‐imidazo[4,5‐c]quinolin‐4(5H)‐ones, and products of molecular rearrangement of the 3‐aminoquinolinedione intermediates. Starting compounds with a benzyl (Bn) group at C(3) afford 3‐aminoquinolinediones, even when only AcONH₄ is used. The results of the reaction between 3‐hydroxyquinoline‐2,4‐diones and KSCN in the presence of BuNH₂ show that replacing a OH group with a secondary NH₂ group is also possible.     

Structural and redox properties of VOx and Pd/VOx thin film model catalysts studied by TEM and SAED

The oxidation of pure V(2)O(3) and Pd/V(2)O(3) films was studied by Transmission Electron Microscopy (TEM) and Selected Area Electron Diffraction (SAED) in the temperature range 673-773 K. Thin films of V(2)O(3) were prepared by reactive deposition of V metal in 10(-2) Pa O(2) on NaCl(001) cleavage faces. Pd particles were epitaxially grown on NaCl(001) and subsequently embedded in V(2)O(3). Oxidation of both pure V(2)O(3) and Pd/V(2)O(3) at 673 K transforms V(2)O(3) into a platelet-like V(2)O(5) structure. At temperatures T>or= 773 K, a reconstruction of the platelet-like V(2)O(5) structure into an array of oblong and needle-type V(2)O(5) nanocrystals of different size occurs. Subsequent reduction of the so-prepared structures in 1 bar H(2) at 573-673 K results in the formation of the cubic VO phase, whereby the external shape of the original crystals is partially maintained. Upon oxidation at 723 K, Pd is transformed into PdO, but its formation is suppressed in comparison with Pd supported on Al(2)O(3) and occurs only at an about 100 K higher temperature than on Pd/Al(2)O(3). The Pd particles are stabilized against oxidation up to 673 K, PdO decomposes upon reduction in hydrogen between 573 and 673 K.     

A molecular clip throws new light on the complexes formed by a family of cyclam-cored dendrimers with Zn(II) ions. Efficient energy transfer in the heteroleptic complexes

Complexation of Zn(II) ions by cyclam cored dendrimers appended with four (G0), eight (G1) and 16 naphthyl chromophores (G2) at the periphery have been investigated in CH?CN-CH?Cl? 1?:?1 (v/v) solution by absorption and emission, ESI-mass and 1H NMR spectroscopy. The results obtained can be interpreted by the formation of complexes of 2?:?1 dendrimer to metal stoichiometry, at low metal ion concentration, and 1?:?1 complexes upon further addition of Zn(II) ions, for all the dendrimer generations. Upon addition of a molecular clip C2? consisting of two anthracene sidewalls bridged by a benzene group with two sulfate substituents in the para positions, heteroleptic complexes of general formula [GnZnC] are formed. Interestingly, in these complexes, a very efficient quenching (practically 100%) of the dendrimer naphthyl luminescence and sensitization (ca. 90%) of the clip anthracene emission take place. The complex [G2ZnC] exhibits a very high molar absorption coefficient in the UV spectral region owing to the 16 naphthyl chromophores of the dendrimer and the two anthracene units of the clip (ε = 1.7 × 10? M?1 cm?1 at 263 nm). Furthermore, the excitation energy absorbed by the naphthyl chromophores is efficiently funneled to the two anthracene units of the clip, which emits in the blue spectral region.     

Flow-injection approach for the determination of the dynamic response characteristics of ion-selective electrodes. Part 1. Theoretical considerations

A single-line flow-injection system with a straight tube reactor is proposed for investigating the dynamic response behaviour of ion-selective electrodes. The principle of the method is based on the fact that the concentration—time curve at the electrode surface can be described theoretically in the flow-injection system under certain practically realizable conditions. The response of the ion-selective electrode to that input signal can be measured experimentally. Thus, knowing the input and the output signal of an ion-selective electrode, an appropriate model describing its dynamic behaviour can be selected among the relevant models existing in the literature. Theoretical expressions for predicting the transient response of ion-selective electrodes in the flow system when the rate-determining step is an ion-transport process through a diffusion layer or a kinetic process were elaborated.     

Neue Sulfonamide, 12. Mitt. 5-Halogen-substituierte Sulfanilamido-methoxy-pyrimidine

Zusammenfassung Es wird die Darstellung von 2-Sulfanilamido-4-methoxy-5-chlorpyrimidin, 2-Sulfanilamido-4-methoxy-5-jodpyrimidin sowie 4-Sulfanilamido-2-methoxy-5-chlorpyrimidin beschrieben. Die erste Verbindung wurde auf zwei voneinander unabhängigen Synthesewegen erhalten. W. Klötzer undJ. Schantl, Mh. chem.94, 1178 (1963).     

Determination of N-n-alkyl-dimethylmorpholines and their metabolites by high resolution GC/MS

An analytical method is described to determine simultaneously cis/trans N-n-alkyl-dimethylmorpholines and their metabolites, the 4-(ω-carboxy-n-alkyl) cis/trans-2,6-dimethylmorpholines by pyrolytic alkylation and high resolution GC/MS in aqueous systems and sediments. The substances in the sediment phase were analyzed by GC/MS after extraction with methanol and water, substances in the water phase could be directly determined by GC/MS. The analytical procedure also allows the determination of further carboxylic acids in complex aqueous systems. Received: 9 April 1996 / Revised: 10 June 1996 / Accepted: 14 June 1996