A feasibility study on the use of Li(4)V(3)O(8) as a high capacity cathode material for lithium-ion batteries

Li(4)V(3)O(8) materials have been prepared by chemical lithiation by Li(2)S of spherical Li(1.1)V(3)O(8) precursor materials obtained by a spray-drying technique. The over-lithiated vanadates were characterised physically by using scanning electron microscopy (SEM) and X-ray diffraction (XRD), and electrochemically using galvanostatic charge-discharge and cyclic voltammetry measurements in both the half-cell (vs. Li metal) and full-cell (vs. graphite) systems. The Li(4)V(3)O(8) materials are stable in air for up to 5 h, with almost no capacity drop for the samples stored under air. However, prolonged exposure to air will severely change the composition of the Li(4)V(3)O(8) materials, resulting in both Li(1.1)V(3)O(8) and Li(2)CO(3). The electrochemical performance of these over-lithiated vanadates was found to be very sensitive to the conductive additive (carbon black) content in the cathode. When sufficient carbon black is added, the Li(4)V(3)O(8) cathode exhibits good cycling behaviour and excellent rate capabilities, matching those of the Li(1.1)V(3)O(8) precursor material, that is, retaining an average charge capacity of 205 mAh g(-1) at 2800 mA g(-1) (8C rate; 1C rate means full charge or discharge of a battery in one hour), when cycled in the potential range of 2.0-4.0 V versus Li metal. When applied in a non-optimised full cell system (vs. graphite), the Li(4)V(3)O(8) cathode showed promising cycling behaviour, retaining a charge capacity (Li(+) extraction) above 130 mAh g(-1) beyond 50 cycles, when cycled in the voltage range of 1.6-4.0 V, at a specific current of 117 mA g(-1) (C/3 rate).     

Quantitative conformational study of redox-active [2]rotaxanes, part 1: Methodology and application to a model [2]rotaxane

This paper reports a novel methodology for the conformational analysis of [2]rotaxanes. It combines NMR spectroscopic (COSY, NOESY and the recently reported paramagnetic line-broadening and suppression technique) and electrochemical techniques to enable a quantitative analysis of the co-conformations of interlocked molecules and the conformations of their components. This methodology was used to study a model [2]rotaxane in solution. This [2]rotaxane consists of an axle that incorporates an electron-poor, doubly positively charged viologen that threads an electron-rich crown ether. It has been shown that the axle of the [2]rotaxane in its dicationic state adopts a folded conformation in solution and the crown ether is localised at the viologen moiety. Following a one-electron reduction of viologen, the paramagnetic radical cation of the [2]rotaxane retains its folded conformation in solution. The data also demonstrate that in the radical cation the crown ether remains localised at the viologen, despite its reduced affinity for the singly reduced viologen. The combined quantitative NMR spectroscopic and electrochemical characterisation of the electromechanical function of the model [2]rotaxane in solution provides an important reference point for the study of switching in structurally related bistable [2]rotaxanes, which is the subject of the second part of this work.     

"Inject-mix-react-separate-and-quantitate" (IMReSQ) method for screening enzyme inhibitors

Many regulatory enzymes are considered attractive therapeutic targets, and their inhibitors are potential drug candidates. Screening combinatorial libraries for enzyme inhibitors is pivotal to identifying hit compounds for the development of drugs targeting regulatory enzymes. Here, we introduce the first inhibitor screening method that consumes only nanoliters of the reactant solutions and is applicable to regulatory enzymes. The method is termed inject-mix-react-separate-and-quantitate (IMReSQ) and includes five steps. First, nanoliter volumes of substrate, candidate inhibitor, and enzyme solutions are injected by pressure into a capillary as separate plugs. Second, the plugs are mixed inside this capillary microreactor by transverse diffusion of laminar flow profiles. Third, the reaction mixture is incubated to form the enzymatic product. Fourth, the product is separated from the substrate inside the capillary by electrophoresis. Fifth, the amounts of the product and substrate are quantitated. In this proof-of-principle work, we applied IMReSQ to study inhibition of recently cloned protein farnesyltransferase from parasite Entamoeba histolytica. This enzyme is a potential therapeutic target for antiparasitic drugs. We identified three previously unknown inhibitors of this enzyme and proved that IMReSQ could be used for quantitatively ranking the potencies of inhibitors.     

Mixtures of interacting particles with well-defined composition field coupling chi parameters

This article proposes a systematic, quantitative treatment of the problem of associating a scalar Flory-Huggins-like chi parameter directly with the interaction potentials in a binary mixture of point particles. This work fulfills the need for a general, quantitative way to compare chi values in explicitly simulated ensembles of lattice and off-lattice polymer models with field theoretic calculations. Emphasis is placed on constructing particle models where chi is relatively well defined. In general, chi is defined through pair correlation functions, whose thermal fluctuations are coupled to local average composition and composition gradients. This implies that chi is composition dependent even in the simplest particle models. At the same time, by quantifying this effect, it is found that composition-independent chi may be defined to within a few percent for cases where the range of the potential is large relative to the interparticle distance. An explicit formula for chi in terms of interaction potentials is given.     

Configurational assignment of N-arylsulfonylimines of alpha-polychloroaldehydes

Configurational assignment of seven synthesized N-arylsulfonylimines of alpha-polychloroaldehydes has been carried out by means of experimental measurements and high-level ab initio calculations of their (13)C--(13)C, (13)C--(1)H and (15)N--(1)H spin-spin coupling constants. The title compounds were shown to exist in solution solely in the form of E isomers, in line with thermodynamic reasoning.     

para-Hydrogen-induced polarization in heterogeneous hydrogenation reactions

We demonstrate the creation and observation of para-hydrogen-induced polarization in heterogeneous hydrogenation reactions. Wilkinson's catalyst, RhCl(PPh3)3, supported on either modified silica gel or a polymer, is shown to hydrogenate styrene into ethylbenzene and to produce enhanced spin polarizations, observed through NMR, when the reaction was performed with H2 gas enriched in the para spin isomer. Furthermore, gaseous phase para-hydrogenation of propylene to propane with two catalysts, the Wilkinson's catalyst supported on modified silica gel and Rh(cod)(sulfos) (cod = cycloocta-1,5-diene; sulfos = -O3S(C6H4)CH2C(CH2PPh2)3) supported on silica gel, demonstrates heterogeneous catalytic conversion resulting in large spin polarizations. These experiments serve as a direct verification of the mechanism of heterogeneous hydrogenation reactions involving immobilized metal complexes and can be potentially developed into a practical tool for producing catalyst-free fluids with highly polarized nuclear spins for a broad range of hyperpolarized NMR and MRI applications.     

Effect of Inertial Terms on Fluid–Porous Medium Flow Coupling

The study considers an effect of the nonlinear inertial terms in the Brinkman filtration equation on the characteristics of coupled flows in a pure fluid and porous medium in the frameworks of two independent problems. The first problem is the forced boundary-layer flow overlying the Darcy–Brinkman porous medium. The Prandtl theory is used, and the self-similar equations are built to describe it. It is shown that the inertial terms have a valuable effect on the boundary-layer structure because of the large velocity gradient in the transition zone. The boundary-layer thickness in a porous medium rapidly grows at large Reynolds numbers. The velocity magnitude and gradient at the interface also change. The second independent problem is an analysis of the inertial terms effect on the flow stability. The neutral curves of the full and linearized flow models are built using the shooting method. They have different short-wave asymptotic, but there are no significant changes in the critical Reynolds numbers and corresponding wave numbers.