Lewis Acid Promoted Dearomatization of Naphthols

Two-step dearomative functionalization of naphthols promoted by Lewis acids and copper(I) catalysis was developed. Initially, Lewis acid complexation inverted the electronic properties of the ring and established an equilibrium with the dearomatized counterpart. Subsequent trapping of the dearomatized intermediate with organometallics as well as organophosphines was demonstrated and provided the corresponding dearomatized products.     

Controlled ring‐opening homo‐ and copolymerization of ɛ‐caprolactone and d,l‐lactide by iminophenolate aluminum complexes: An efficient approach toward well‐defined macromonomers

The aluminum complexes containing two iminophenolate ligands of the type (p‐XC₆H₄NCHC₆H₄O‐o)₂AlR' (R′=Me ( 3, 4 ) or R′=O(CH₂)₄OCH=CH₂ ( 5, 6 ), X=H ( 3, 5 ), F( 4, 6 )) were synthesized and characterized by ¹H, ¹³C NMR spectroscopy, and X‐ray crystallography. The reaction of AlMe₃ with two equivalents of substituted iminophenols gave five‐coordinated {ONR}₂AlMe ( 3, 4 ) complexes. Subsequent reaction of these methyl complexes with unsaturated alcohol, HO(CH₂)₄OCH=CH₂, resulted in target compounds 5 and 6 in a good yield. It was shown that the complexes ( 3 ‐ 6 ) are monomeric in solution (NMR) and in solid state (X‐ray analysis). The catalytic activity of the complexes 5 and 6 towards ring‐opening polymerization (ROP) of ?‐caprolactone and d,l ‐lactide was assessed. Complex 5 showed higher activity as compared with 6 , while both of these catalysts induced controlled homo‐ and copolymerization to afford the macromonomers with high content of vinyl ether end groups (F_n > 80%) in a broad range of molecular weights (M_n = 4000–30,000 g mol^?1) with relatively narrow MWD (M_w/M_n = 1.1–1.5). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1237–1250     

Rapid Removal of Organics and Oil Spills from Waters Using Silicone Rubber “Sponges”

We have developed a simple, robust, and efficient technology utilizing cheap and recoverable materials based on commercially available silicone elastomer networks for removing organic solvents and crude oil from waters. Hydrophobic and oleophilic properties of silicone elastomers endow poly(dimethyl siloxane) (PDMS) with the capacity to absorb a large variety of organics, including benzene (B), toluene (T), ethylbenzene (E), and xylene (X), commonly referred to as BTEX, and also crude oils, while at the same time enabling the organic “sponges” to float on waters, which facilitates straightforward handling. We developed a method for generating PDMS particles with variable sizes (ranging from hundreds nanometers to few millimeters) by drop-wise depositing siloxane/cross-linker mixtures into warm water, a process which leads to the cross-linking of the PDMS components. We have tested the capability of the PDMS particles to remove toluene and benzene from water. We also performed similar experiments by utilizing PDMS sheets. In both instances we observed a rapid sorption of the organic phase into PDMS; the amount of absorbed organic solvent depended on the concentration in water and the total mass (volume) of PDMS and did not depend on the geometry of the PDMS “sponge.” In addition, we have examined the uptake of toluene and benzene from toluene/benzene (T/B) mixtures dissolved in water. Our results indicate that the amount of benzene absorbed from the T/B mixtures into PDMS increases relative to the uptake from pure benzene/water solutions. This behavior is associated with toluene acting as a “surfactant” that effectively replaces the more unfavorable PDMS/B contacts with less costly T/B ones. Finally, a simple experiment demonstrates qualitatively that PDMS is also capable of removing crude oils from oil-contaminated waters.     

Atom-economic Approach to the Synthesis of α-(Hetero)aryl-substituted Furan Derivatives from Biomass

An atom-economic ring construction approach to the synthesis of α-(hetero)arylfurans based on renewable furanic platform chemicals has been developed. Corresponding compounds have been prepared in good to excellent yields via [2+2+2] and [4+2] cycloaddition reactions using metal-catalyzed or photoredox protocols. Easily available HMF-based 2-hydroxymethyl-5-ethynylfuran and 2-hydroxymethyl-5-cyanofuran were used as starting materials. A synthetic route with an improved carbon economy factor has been implemented to achieve sustainability aim. The possible application of arylfurans as molecular conductors has been investigated by DFT calculations, which revealed excellent charge transfer properties. As a future perspective, integration of biomass processing strategy into manufacturing of molecular electronics was pointed out to achieve the aim of sustainability.     

Generation of a Hetero Spin Complex from Iron(II) Iodide with Redox Active Acenaphthene-1,2-Diimine

The reaction of the redox active 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-BIAN) and iron(II) iodide in acetonitrile led to a new complex [(dpp-BIAN)Fe^III₂] (1). Molecular structure of 1 was determined by the single crystal X-ray diffraction analysis. The spin state of the iron cation in complex 1 at room temperature and the magnetic behavior of 1 in the temperature range of 2–300 K were studied using Mossbauer spectroscopy and magnetic susceptibility measurements, respectively. The neutral character of dpp-BIAN in 1 was confirmed by IR and UV spectroscopy. The electrochemistry of 1 was studied in solution and solid state using cyclic voltammetry. The generation of the radical anion form of the dpp-BIAN ligand upon reduction of 1 in a CH₂Cl₂ solution was monitored by EPR spectroscopy.     

Conformational flexibility of xanthene‐based covalently linked dimers

The conformational flexibility of three covalently linked dimers consisting of two xanthene‐based moieties connected by a diphenyl ether linker was studied using NMR spectroscopy, X‐ray crystallography, and density functional theory (DFT) calculations. The three dimers interconvert as a function of pH: the doubly cationic dimer (Xan⁺)₂ exists in acidic solutions (pH < 0.5), the mono‐alcohol monocation Xan⁺–Xan‐OH at intermediate pH values (pH = 1–3), and the neutral diol at the highest pH‐values (pH > 3). Each dimer exhibits conformational degrees of freedom associated with rotations of either the xanthene moiety or of the diphenyl ether (DPE) linker. The barriers for rotation of the xanthylium moiety were evaluated using DFT calculations, yielding values of 23 kcal/mol for (Xan⁺)₂ and 11 kcal/mol for (Xan‐OH)₂, respectively. The rotational barrier for the diphenyl ether linker in Xan⁺–Xan‐OH (15 kcal/mol) was experimentally determined using variable temperature NMR measurements. The relative orientation of the two –OH groups in (Xan‐OH)₂ diol was investigated in solution and the solid state using NMR spectroscopy and X‐ray crystallography. The conformer observed in the solid state was found to be the In–Out conformer, while free rotation of the xanthenol units is thought to occur on the NMR timescale at room temperature. These studies are relevant for the design of linkers for efficient water oxidation catalysts. Copyright © 2016 John Wiley & Sons, Ltd.     

Graphene screen‐printed radio‐frequency identification devices on flexible substrates

Despite the great promise of printed flexible electronics from 2D crystals, and especially graphene, few scalable applications have been reported so far that can be termed roll‐to‐roll compatible. Here we combine screen printed graphene with photonic annealing to realize radio‐frequency identification devices with a reading range of up to 4 meters. Most notably our approach leads to fatigue resistant devices showing less than 1% deterioration of electrical properties after 1000 bending cycles. The bending fatigue resistance demonstrated on a variety of technologically relevant plastic and paper substrates renders the material highly suitable for various printable wearable devices, where repeatable dynamic bending stress is expected during usage. All applied printing and post‐processing methods are compatible with roll‐to‐roll manufacturing and temperature sensitive flexible substrates providing a platform for the scalable manufacturing of mechanically stable and environmentally friendly graphene printed electronics.

     

Breakdown of a topological phase: quantum phase transition in a loop gas model with tension

We study the stability of topological order against local perturbations by considering the effect of a magnetic field on a spin model--the toric code--which is in a topological phase. The model can be mapped onto a quantum loop gas where the perturbation introduces a bare loop tension. When the loop tension is small, the topological order survives. When it is large, it drives a continuous quantum phase transition into a magnetic state. The transition can be understood as the condensation of "magnetic" vortices, leading to confinement of the elementary "charge" excitations. We also show how the topological order breaks down when the system is coupled to an Ohmic heat bath and relate our results to error rates for topological quantum computations.     

Decoherence of anyonic charge in interferometry measurements

We examine interferometric measurements of the topological charge of (non-Abelian) anyons. The target's topological charge is measured from its effect on the interference of probe particles sent through the interferometer. We find that superpositions of distinct anyonic charges a and a' in the target decohere (exponentially in the number of probes particles used) when the probes have nontrivial monodromy with the charges that may be fused with a to give a'.