Inclusion complex formation of β-cyclodextrin and Naproxen: a study on exothermic complex formation by differential scanning calorimetry

Inclusion complex formation between β-cyclodextrin and Naproxen was investigated using differential scanning calorimetry (DSC) as a function of the β-cyclodextrin-to-Naproxen molar ratio, ranging from 0:5:1 to 5:1. When these mixtures are heated above the melting temperature of Naproxen, an exothermic peak is observed at a temperature slightly higher than the melting peak of Naproxen. This peak, which has not been previously reported, has been interpreted as an exothermic energy of inclusion complex formation. The magnitude of this complex formation peak was found to be dependent upon the composition of the β-cyclodextrin and Naproxen mixture and increased in magnitude to a maximum value at a β-cyclodextrin:Naproxen molar ratio of 2:1. In addition, Naproxen recrystallization and re-melting peaks seen in the cooling and re-heating scans, respectively, decreased in magnitude with increasing molar ratio and totally disappeared for the mixture with 5:1 of β-cyclodextrin to Naproxen ratio indicative of complete inclusion of Naproxen in the cyclodextrin cavities. Complete inclusion was further reflected by the disappearance of key Naproxen peaks in Fourier transform infrared spectra of samples recovered from DSC experiments. The large excess of β-cyclodextrin needed to fully complex the Naproxen was found to be due to slow kinetics. Increasing the hold time after the initial melting led to inclusion efficiencies up to 95 % even for the 2:1 mixture. These experiments suggest that ratios of β-cyclodextrin:Naproxen 2:1 or greater facilitate the process by increasing the presence of cyclodextrin molecules in the close proximity of the drug molecules and lead to high inclusion efficiencies.     

BF3·OEt2-catalyzed synthesis of 1-(tetrahydropyran-3-yl)-1,3-dihydroisobenzofuran and trans-fused hexahydropyrano[3,2-c]chromene derivatives

A novel intramolecular Prins cyclization of (E)-5-(2-(hydroxymethyl)phenyl)pent-4-en-1-ol with aldehydes has been achieved using 10 mol % BF₃·Et₂O to produce 1-(tetrahydropyran-3-yl)-1,3-dihydroisobenzofuran derivatives in good to excellent yields with high selectivity. Similar type of coupling with salicylaldehydes provides the trans-fused hexahydropyrano[3,2-c]chromene derivatives in excellent yields.     

Non destructive evaluation of selected polymers by multiple scattering of 662 keV gamma rays

In this paper, multiple scattering of 662 keV gamma photons from targets of Carbon, Aluminium, Iron, Copper and polymers (Polypropylene, Polycarbonate, Polymethyl methacrylate, Polytetraflouroethylene and Polyvinyl chloride) is studied experimentally. Backscattered photons are detected by a NaI(Tl) detector placed at an angle of 90° to the incident beam. The single scattered events are reconstructed analytically to extract multiple scattered photons from the measured spectra. We observe that the number of backscattered photons increases with an increase in target thickness, and saturates at a particular value of the target thickness. This saturation thickness decreases with increasing atomic number of the target. The saturation thickness of the multiple scattering is used to assign effective atomic number of polymers. The experimental results are compared with the results obtained by Monte Carlo N-particle simulation code.     

Monitoring the Reaction of the Body State to Antibiotic Treatment against Helicobacter pylori via Infrared Spectroscopy: A Case Study

The current understanding of deviations of human microbiota caused by antibiotic treatment is poor. In an attempt to improve it, a proof-of-principle spectroscopic study of the breath of one volunteer affected by a course of antibiotics for Helicobacter pylori eradication was performed. Fourier transform spectroscopy enabled searching for the absorption spectral structures sensitive to the treatment in the entire mid-infrared region. Two spectral ranges were found where the corresponding structures strongly correlated with the beginning and end of the treatment. The structures were identified as methyl ester of butyric acid and ethyl ester of pyruvic acid. Both acids generated by bacteria in the gut are involved in fundamental processes of human metabolism. Being confirmed by other studies, measurement of the methyl butyrate deviation could be a promising way for monitoring acute gastritis and anti-Helicobacter pylori antibiotic treatment.     

BMIM[BF4]: An Efficient Ionic Liquid Medium for the Synthesis of Chromeno[b]pyridines as Potential Anticancer Agents

Russian Journal of Organic Chemistry - A series of 2-amino-4-aryl-5-oxochromeno[4,3-b]pyridine-3-carbonitriles have been synthesized with good yields (85–90%) by reacting...     

Enhancement of Stress Tolerance in the Polyhydroxyalkanoate Producers without Mobilization of the Accumulated Granules

Poly(3-hydroxybutyrate) [P(3HB)], a polymer belonging to the polyhydroxyalkanoate (PHA) family, is accumulated by numerous bacteria as carbon and energy storage material. The mobilization of accumulated P(3HB) is associated with increased stress and starvation tolerance. However, the potential function of accumulated copolymer such as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] remained unknown. In this study, Delftia acidovorans DS 17 was used to evaluate the contributions of P(3HB) and P(3HB-co-3HV) granules during simulated exogenous carbon deprivation on cell survival by transferring cells with PHAs to carbon-free mineral salt medium supplemented with 1 % (w/v) nitrogen source. By mobilizing the intracellular P(3HB) and P(3HB-co-3HV) at 11 and 40 mol% 3HV compositions, the cells survived starvation. Surprisingly, D. acidovorans containing P(3HB-co-94 mol% 3HV) also survived although the mobilization was not as effective. Similarly, recombinant Escherichia coli pGEM-T::phbCAB _Cn (harboring the PHA biosynthesis genes of Cupriavidus necator) containing P(3HB) granules had a higher viable cell counts compared to those without P(3HB) granules but without any P(3HB) mobilization when exposed to oxidative stress by photoactivated titanium dioxide. This study provided strong evidence that enhancement of stress tolerance in PHA producers can be achieved without mobilization of the previously accumulated granules. Instead, PHA biosynthesis may improve bacterial survival via multiple mechanisms.     

Synthesis of Peptide Cysteine Dimedone Using Fmoc-Cys(Dmd)-OH: Glutathione Cysteine Dimedone as a Probe in Investigating the Sulfenic Acid Mediated Oxidation of Glutathione

Dimedone is the most widely used chemical probe for detection of cysteine sulfenic acid in peptides and proteins. The reaction of dimedone with cysteine sulfenic acid results in the formation of unique cysteine dimedone motif containing thioether bridge. Based on the structure of cysteine dimedone residue in polypeptide, a new building block of Fmoc-Cys(Dmd)-OH was developed for solid phase synthesis of peptide cysteine dimedone. Mass spectrometric sequencing of synthetic peptides have confirmed successful incorporation of cysteine dimedone in peptide chain using HBTU/HOBt as a coupling agent. The new method permits synthesis of peptides containing both cysteine thiol and cysteine dimedone in the same sequence which was difficult to achieve by conventional methods. The synthetic peptide of glutathione cysteine dimedone was used as a standard in probing the air-mediated oxidation of thiol to disulfide form of glutathione. The co-elution of standard peptide and reaction mixture of oxidation of glutathione in presence of dimedone using RP-HPLC have confirmed the formation of glutathione cysteine sulfenic as an intermediate in the air-mediated oxidation of glutathione. The synthetic peptides of cysteine dimedone may find application in the field of redox proteomics and generation of antibodies against modified cysteine residue.     

DABCO mediated one pot synthesis of 2-(3-benzyl-2, 6-dioxo-3, 6-dihydropyrimidin-1[2H]-yl)-N-(4-(1, 3-dioxo-1H-benzo [de]isoquinolin-2[3H]-yl) aryl) acetamides as antimicrobial agents

We report herein DABCO mediated one pot synthesis of 2-(3-benzyl-2, 6-dioxo-3,6-dihydropyrimidin-1[2H]-yl)-N-(4-(1,3-dioxo-1H-benzo[de]isoquinolin-2[3H]-yl) aryl) acetamides ( 4a-j ). The silent features of this new one pot synthesis include the shorter reaction time, high yields, simple workup, and simultaneous formation of N-Amide and N-benzyl bonds in the one pot. The newly synthesized compounds ( 4a-j ) were characterized by different spectral techniques such as IR, ¹H-NMR, ¹³C-NMR, HRMS. All the synthesized compounds were evaluated for their anti-bacterial and anti-fungal activities. The anti-bacterial activities results reveal that the compounds 4a , 4g , 4i , and 4j are most active against S. aureus. In the case of B. subtilis the compounds 4a , 4i , and 4j are found to be most active. The compounds 4c , 4e , 4i , and 4j are most active against E. coli. In the case of P. aeruginosa 4a , 4i & 4j are found to be more active. On the other hand, the anti-fungal activity result shows that the compounds 4d , 4f , 4i , and 4j are more active against A. niger. The compounds 4a , 4d , 4i , and 4j are found to be more active against C. albicans.     

Synthesis of IONP's decorated graft copolymers and study of their magnetic force–induced wastewater treatment

Our work is focused on facile synthesis and modification of amylopectin‐grafted block copolymers by using reversible addition?fragmentation chain transfer (RAFT) polymerization technique. This technique yields polymers with controlled molecular weight and low polydispersity indexes and is feasible with a wide range of monomers. Five different grades of amylopectin‐grafted polymethacrylic acid and polyacrylamide block copolymers have been synthesized via RAFT, by varying the amount of acrylamide employing amylopectin‐based macro chain transfer agent. Graft copolymers have been upgraded as smart responsive graft copolymers, through the incorporation of iron oxide nanoparticles (IONPs) via condensation reaction. The polymeric materials have been extensively characterized by energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy, proton magnetic resonance spectroscopy, scanning electron microscopy, ultraviolet‐visible spectroscopy, gel permeation chromatography, transmission electron microscopy, thermogravimetric analysis, and X‐ray diffraction analysis. Normal and responsive graft copolymers have been studied for removal of model contaminant (kaolin), and responsive graft copolymers have been used to remove methylene blue dye (without using any adsorbent) from water by applying external magnetic field. The upgraded block copolymers have shown best performance in wastewater treatment.