Dynamics of hairpin vortices and polymer-induced turbulent drag reduction

It has been known for over six decades that the dissolution of minute amounts of high molecular weight polymers in wall-bounded turbulent flows results in a dramatic reduction in turbulent skin friction by up to 70%. First principles simulations of turbulent flow of model polymer solutions can predict the drag reduction (DR) phenomenon. However, the essential dynamical interactions between the coherent structures present in turbulent flows and polymer conformation field that lead to DR are poorly understood. We examine this connection via dynamical simulations that track the evolution of hairpin vortices, i.e., counter-rotating pairs of quasistreamwise vortices whose nonlinear autogeneration and growth, decay and breakup are centrally important to turbulence stress production. The results show that the autogeneration of new vortices is suppressed by the polymer stresses, thereby decreasing the turbulent drag.     

Measurement of the magnetic moment in a cold worked 304 stainless steel using HTS SQUID

The magnetic properties of stainless steel have been investigated using a radio frequency (RF) high-temperature superconductivity (HTS) SQUID (Superconducting QUantum Interference Device)-based susceptometer. The nuclear grade 304 stainless steel is nonmagnetic at a normal condition but it changes to a partially ferromagnetic state associated with martensitic transformation under a plastic deformation. The magnetic moment of the 304 stainless steels was increased with an increasing cold work rate, and decreased with an increasing annealing temperature. The change of mechanical properties such as yield strength and ultimate tensile strength (UTS) are also analyzed in terms of deformation-induced martensitic transformation.     

Nonlinear properties of quantum dot semiconductor optical amplifiers at 1.3 μm Invited Paper

The dynamics of nonlinear processes in quantum dot (QD) semiconductor optical amplifiers (SOAs) are investigated. Using small-signal measurements, the suitabilities of cross-gain and cross-phase modulation as well as four wave mixing (FWM) for wavelength conversion are examined. The cross-gain modulation is found to be suitable for wavelength conversion up to a frequency of 40 GHz.     

Depth-controlled reconstruction of 3D integral image using synthesized intermediate sub-images

In this paper, we propose a method that controls the depth of the three-dimensional (3D) object existing over the depth-of-focus in integral imaging. The depth control method is performed only in a computer by synthesizing the intermediate sub-images between original sub-images obtained by transforming the captured elemental images. In the reconstruction process, we can obtain reconstructed 3D images with the better image quality within depth-of-focus than that reconstructed over the depth-of-focus. To demonstrate the feasibility of our method, optical and computational experiments are carried out and its results are presented.     

Polyvinyl alcohol-borate hydrogel containing Prussian blue for surface decontamination

A polyvinyl alcohol (PVA)-borate hydrogel-based strippable surface decontaminant containing an ammonium salt and Prussian blue (PB) was developed for the removal of ¹³⁷Cs from various surfaces. This surface decontaminant can be easily prepared by the simple mixing of commercially available materials, such as PVA, borax, NH₄Cl and PB, in water, and the decontaminant can be peeled off surfaces due to its high elastic property after surface decontamination. The hydrogel displayed an effective removal performance for Cs from painted cement, aluminum, stainless steel, and cement surfaces and a potential for reusability. Therefore, the PB/PVA-borate hydrogel has good potential as a new surface decontaminant.     

Effect of irradiation on the cryogenic mechanical characteristics of polyurethane foam

The present study investigated thermal and mechanical characteristics of irradiated polyurethane foams (PUFs) according to the irradiation does under various temperature conditions, including low/cryogenic temperatures. Fourier transform infrared analysis was performed to obtain information on the PUF molecular structure. In addition, Macro- and microstructural investigations were carried out to determine the relationship between thermal and mechanical characteristics and irradiation dose. The test results were quantitatively presented, and it was found that the irradiated PUF has potential for application in industrial structures.     

Measurement of <Superscript>99</Superscript>Mo production cross-section from the <Superscript>100</Superscript>Mo(n,2n) reaction with quasi monoenergetic neutron based on the <Superscript>9</Superscript>Be(p,n) reaction

The production cross-section of the medical isotope, ⁹⁹Mo from the enriched ¹⁰⁰Mo(n,2n) reaction with the average neutron energies of 21.9 and 26.5 MeV has been determined for the first time by using an off-line γ-ray spectrometric technique. The average neutron energies were generated by using the ⁹Be(p,n) reaction with the proton energies of 35 and 45 MeV from the MC50 cyclotron of the Korea Institute of Radiological and Medical Sciences (KIRAMS) at Seoul, South Korea. The ¹⁰⁰Mo(n,2n) reaction cross-section as a function of neutron energy was also calculated theoretically by using the computer code TALYS-1.8 and EMPIRE-3.2 Malta. The experimental results are in close agreement with the theoretical values from TALYS-1.8. However, the present data at the neutron energy of 21.9 MeV is slightly lower and at 26.5 MeV is higher than the values from EMPIRE-3.2 Malta.     

Synthesis and evaluation of triphenylphosphonium conjugated 18F-labeled silica nanoparticles for PET imaging

Journal of Radioanalytical and Nuclear Chemistry - Accumulation of triphenylphosphonium (TPP) is normally observed in the mitochondria from the extracellular spaces due to the high difference in...     

Uranium recovery with zinc distillation from a liquid zinc cathode for pyroprocessing

Journal of Radioanalytical and Nuclear Chemistry - U recovery test was performed on a Zn-U alloy to confirm the feasibility of Zn as an alternative cathode material. An evaporation test of pure Zn...     

Applicability of in situ detectors for radiological assessment of strontium-90 in rivers and lakes

Journal of Radioanalytical and Nuclear Chemistry - An in situ detector for radiological assessments of strontium-90 (90Sr) in river and lake water is developed, based on a CaF2(Eu) scintillator,...