Characterization and properties of low-linear-density polyethylene/Typha latifolia composites

The characterization of the effects of different sizes and loadings of Typha latifolia on the tensile, thermal, and morphological properties of linear-low-density polyethylene (LLDPE)/T. latifolia composites were evaluated using tensile test, Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy analyses. Results indicated the tensile strength and elongation at break decreased as T. latifolia loading increased. However, T. latifolia fine size (fs) exhibited better tensile properties than coarse size at the same loading in the composite. T. latifolia (15%, fs) recorded higher thermal stability than LLDPE control and other T. latifolia loadings and sizes due to the strong interaction of T. latifolia (15%, fs) in LLDPE matrix as shown in morphology.     

Synthesis of tapioca cellulose-based poly(hydroxamic acid) ligand for heavy metals removal from water

A graft copolymerization was performed using free radical initiating process to prepare the poly(methyl acrylate) grafted copolymer from the tapioca cellulose. The desired material is poly(hydroxamic acid) ligand, which is synthesized from poly(methyl acrylate) grafted cellulose using hydroximation reaction. The tapioca cellulose, grafted cellulose and poly(hydroxamic acid) ligand were characterized by Infrared Spectroscopy and Field Emission Scanning Electron Microscope. The adsorption capacity with copper was found to be good, 210 mg g^?1 with a faster adsorption rate (t_1/2 = 10.5 min). The adsorption capacities for other heavy metal ions were also found to be strong such as Fe³⁺, Cr³⁺, Co³⁺ and Ni²⁺ were 191, 182, 202 and 173 mg g^?1, respectively at pH 6. To predict the adsorption behavior, the heavy metal ions sorption onto ligand were well-fitted with the Langmuir isotherm model (R² > 0.99), which suggest that the cellulose-based adsorbent i.e., poly(hydroxamic acid) ligand surface is homogenous and monolayer. The reusability was checked by the sorption/desorption process for six cycles and the sorption and extraction efficiency in each cycle was determined. This new adsorbent can be reused in many cycles without any significant loss in its original removal performances.     

Anomalous behaviour in the SmA*–SmCA* pre‐transitional regime of a chiral swallow‐tailed antiferroelectric liquid crystal

The temperature‐ and electric field‐dependent dielectric relaxation and polarisation of a new chiral swallow tailed antiferroelectric liquid crystal, i.e. 1‐ethylpropyl (S)‐2‐{6‐[4‐(4′‐decyloxyphenyl)benzoyloxy]‐2‐naphthyl}propionate (abbreviated as EP10PBNP), were investigated. The electric field‐induced dielectric loss spectra of EP10PBNP revealed electroclinic and anomalous dielectric behaviour in the chiral smectic A (SmA*)–chiral antiferroelectric smectic C (SmC_A*) pre‐transitional regime. From an analysis of thermal hysteresis of the dielectric constant, electric field‐induced polarisation and dielectric loss spectra, the appearance of a ferrielectric‐like mesophase is observed followed by an unstable SmC_A* phase in the SmA*–SmC_A* pre‐transitional regime.     

Study of Sorption of 2,4‐D on Outer Peristaltic Part of Waste Tire Rubber Granules

From this study it was evident that outer peristaltic parts of waste tire granules gave the highest removal. Film and pore diffusions are the major factors controlling rates of sorption from solution by porous adsorbents. For sorption of 2,4‐D on waste tire rubber granules, the sorption rate coefficient of second‐order kinetic equation was utilized indirectly to determine the rate‐limiting step. The diffusion coefficient lies in the scale of 10^?8 cm²/s, and the pore diffusion coefficient is in the range of 10^?9–10^?10 cm²/s. So both film and pore diffusion are rate limiting. Considering external mass transfer from fluid to particle, using the effect of initial concentration, and using the effect of adsorbent size, no conclusion was reached regarding rate‐controlling steps. It is apparent from the study that external mass transfer (film diffusion) as well as intra‐particle diffusion (pore diffusion) play significant roles in the sorption process for 2,4‐D removal from water onto rubber granules.     

Optical band gap and conductivity measurements of polypyrrole-chitosan composite thin films

Electrical conductivity and optical properties of polypyrrole-chitosan（PPy-CHI） conducting polymer composites have been investigated to determine the optical transition characteristics and energy band gap of composite films.The two electrode method and I-V characteristic technique were used to measure the conductivity of the PPy-CHI thin films,and the optical band gap was obtained from their ultraviolet absorption edges.Depending upon experimental parameter,the optical band gap（E_g） was found within 1.30-2.32 eV as estimated from optical absorption data.The band gap of the composite films decreased as the CHI content increased.The room temperature electrical conductivity of PPy-CHI thin films was found in the range of 5.84×10^-7-15.25×10^-7 S·cm^-1 depending on the chitosan content.The thermogravimetry analysis（TGA） showed that the CHI can improve the thermal stability of PPy-CHI composite films.     

Recent progress of poly (N-isopropylacrylamide) hybrid hydrogels: synthesis,fundamentals and applications – review

Hydrogels, having nanomaterials (e.g. nanoparticles and nanorods) incorporated inside their polymeric meshes, are generally called hybrid gels/hydrogels. These assemblies combine the properties of both hydrogels and nanomaterials in one system. These responsive hybrid hydrogels, particularly polymerized N-isopropylacrylamide (PoNip) polymeric gels, have been extensively exploited for various multi-disciplinary applications in the literature over the past two decades because of their unique and exquisite particulars. Next generation assemblies have been prepared by using the smart nature of these gels toward the general incentives (e.g. temperature, ionic strength, and pH) in the fields of nanocatalysis, water purification, drug delivery, photonics, and optics. This review presents an overview of the PoNip hybrid assemblies engineered over the past 7 years i.e. 2010–2016 and extensively discusses the interaction of the incorporated nanomaterial with the polymeric chains of the hydrogels as it is the most significant factor which makes these assemblies attractive for all the associated applications. Moreover, this article also describes the preparative routes, properties, classification, and applications of these hybrid hydrogels in the fields of medicine, environment, catalysis, and nanotechnology.     

Oxidative coupling of methane for the production of ethylene over Li-Ni/MgO catalys

Oxidative coupling of methane for the production of ethylene was studied over Li-Ni/MgO catalyst in a fixed bed reactor. The influences of important reaction parameters such as temperature (T), methane/oxygen ratio (CH₄/O₂) in feed and space velocity of reactants (V/m_cat) were studied over the conversion of methane, yields of ethylene and ethane and selectivity of ethylene formation. The reaction conditions were varied as 650 < T < 850^oC, 0.83 x 10^-6 < V/m_cat < 2.92 x 10^-6 m³/g s and 1 < CH₄/O₂ ratio < 8.     

Aromatic Polynitro Ether Derivatives of Cellulose

The nucleophilic reaction of sodium cellulosate in the form of membrane or cotton fabric with 2, 4-dinitrohalo-benzenes, 2, 4, 6-trinitrochlorobenzene, 2, 4, 6-trinitrobenzyl bromide, and 2, 4, 6-trinitrostyrene was investigated. The degree of substitution attained with the dinitroaryl derivatives was much higher than that with the trinitroaryl derivatives. The reaction proceeded through Meisen-heimer complexes, which in the case of the trinitro derivatives could be isolated. The ability of the polynitro phenyl ether derivatives of the cellulose to form n- and π-complexes was investigated using naphthalene and p-toluidine. No -π- complex was formed with the former, and the latter gave complexes only with the 2, 4, 6-trinitrobenzyl or -phenethyl cellulose derivatives but not with the trinitrophenyl. The results were explained as due to steric hindrance from the polymeric cellulosic backbone.     

Microbial Transformation of Sesquiterpenes, (−)‐Ambrox® and (+)‐Sclareolide

The microbial transformation of (?)‐Ambrox^® ( 1 ), a perfumery sesquiterpene, by a number of fungi, by means of standard two‐stage‐fermentation technique, afforded ambrox‐1α‐ol ( 2 ), ambrox‐1α,11α‐diol ( 3 ), ambrox‐1α,6α‐diol ( 4 ), ambrox‐1α,6α,11α‐triol ( 5 ), ambrox‐3‐one ( 6 ), ambrox‐3β‐ol ( 7 ), ambrox‐3β,6β‐diol ( 8 ), 13,14,15,16‐tetranorlabdane‐3,8,12‐triol ( 9 ), and sclareolide ( 10 ) (Schemes 1 and 2). Further incubation of compound 10 with Cunninghamella elegans afforded 3‐oxosclareolide ( 11 ), 3β‐hydroxysclareolide ( 12 ), 2α‐hydroxysclareolide ( 13 ), 2α,3β‐dihydroxysclareolide ( 14 ), 1α,3β‐dihydroxysclareolide ( 15 ), and 3β‐hydroxy‐8‐episclareolide ( 16 ) (Scheme 3). Metabolites 2 – 5, 12, 13 , and 16 were found to be new compounds. The major transformations include a reaction path involving hydroxylation, ether‐bond cleavage and inversion of configuration. Metabolites 11 – 16 of sclareolide showed significant phytotoxicity (Table 1). The structures of the metabolites were characterized on the basis of spectroscopic techniques.     

Copper perchlorate and tetrafluoridoborate compounds with the ligand 1,4,5-triazanaphthalene. Gradual transformation of mononuclear Cu(II) compounds via polynuclear mixed-valence Cu(II)/Cu(I) species to dinuclear Cu(I); syntheses, characterizations and X-ray structures

When the ligand 1,4,5-triazanaphthalene (abbreviated as tan) is reacted with Cu(II) BF(4)(-) and ClO(4)(-) salts, a variety of mononuclear compounds has been found, all with the [Cu(tan)(4)] unit and varying amounts of weakly coordinating axial ligands and lattice solvents. Reproducible compounds formed include two purple compounds, analyzing as [Cu(tan)(4)](ClO(4))(2)(CH(3)OH)(2)(H(2)O) (1) and [Cu(tan)(4)](BF(4))(2)(CH(3)OH)(1.5)(H(2)O) (3), and two blue compounds, analyzing as [Cu(tan)(4)](ClO(4))(2)(H(2)O)(2) (2) and [Cu(tan)(4)](2)(BF(4))(2)(H(2)O)(2) (4). Upon standing at room temperature, red-coloured, mixed-valence dinuclear-based 3D coordination polymers are formed by conversion of the purple/blue products, of which [Cu(2)(tan)(4)](n)(BF(4))(3n) (5) and the isomorphic methanol-water adduct [Cu(tan)(4)](n)(BF(4))(3n)(CH(3)OH)(n)(H(2)O)(5n) (5A) are presented in this paper. In addition a fully reduced dinuclear Cu(I) compound of formula [Cu(2)(tan)(3)(ClO(4))(2)] (7) has been observed, and structurally characterized, as a rare three-blade propeller structure, with a Cu-Cu distance of 2.504 ?.