Development and Validation of Kinetic Spectrophotometric Method for the Determination of Losartan Potassium in Pure and Commercial Tablets

A validated kinetic spectrophotometric method has been developed for the determination of losartan potassium in pure and dosage forms. The method is based on oxidation of the losartan potassium with alkaline potassium permanganate at room temperature (25 ± 1 °C). The reaction is followed spectrophotometrically by measuring the increase in absorbance with time at 603 nm, and the initial rate, fixed time (at 12.0 min) and equilibrium time (at 90.0 min) methods are adopted for constructing the calibration graphs. All the calibration graphs are linear in the concentration range of 7.5–60.0 μg mL^?1 and the calibration data resulted in the linear regression equations of n? = ?6.422 × 10^?7 + 1.173 × 10^?5 C, A =3.30 × 10^?4 + 5.28 × 10^?3 C and A = ?2.09 × 10^?2 + 1.05 × 10^?1 C for initial‐rate, fixed time and equilibrium time methods, respectively. The limits of detection for initial rate, fixed time and equilibrium time methods are 0.71, 0.21 and 0.19 μg mL^?1, respectively. The activation parameters such as E_a, ΔH^?, ΔS^?, and ΔG^? are also determined for the reaction and found to be 87.34 KJ mol^?1, 84.86 KJ mol^?1, 50.96 JK^?1 mol^?1 and ?15.10 KJ mol^?1, respectively. The variables are optimized and the proposed methods are validated as per ICH guidelines. The method has been applied successfully to the estimation of losartan potassium in commercial tablets. The performance of the proposed methods was judged by calculating paired t‐ and F‐ values. The analytical results of the proposed methods when compared with those of the reference method show no significant difference in accuracy and precision and have acceptable bias.     

Angular distributions of H-induced HD and D2 desorptions from the Si(100) surfaces

We measured angular distributions of HD and D2 molecules desorbed via the reactions H+DSi(100)-->HD [abstraction (ABS)] and H+DSi(100)-->D2 [adsorption-induced-desorption (AID)], respectively. It was found that the angular distribution of HD molecules desorbed along ABS is broader than that of D2 molecules desorbed along AID, i.e., the former could be fit with cos(2.0+/-0.2) theta, while the latter with cos(5.0+/-0.5) theta. This difference of the angular distributions between the two reaction paths suggests that their dynamic mechanisms are different. The observed cos2 theta distribution for the ABS reaction was reproduced by the classical trajectory calculations over the London-Eyring-Polanyi-Sato potential-energy surfaces. The simulation suggests that the HD desorption along the ABS path takes place along the direction of Si-D bonds, but the apparent angular distribution is comprised of multiple components reflecting the different orientations of D-occupied Si dimers in the (2 x 1) and (1 x 2) double domain structures.     

Retention mechanism of L-glutamide-derived noncrystalline stationary phases in reversed-phase high-performance liquid chromatography and application for separation of nucleic acid constituents

Double alkylated L-glutamide-derived noncrystalline stationary phases Sil-DSG and Sil-DBG have been prepared by coupling N',N'-dioctadecyl-N-[4-carboxybutanoyl]-L-glutamide (DSG) and N',N',-dibutyl-N-[4-carboxybutanoyl]-L-glutamide (DBG) with aminopropylated silica (Sil-APS). TEM observations of DSG and DBG showed that lipid DSG can aggregate in organic solvents (methanol, chloroform, toluene, etc.) and self-assembled nano fibers are observed while such fibrous aggregations are not observed for DBG. The resulting chromatographic data have been provided information about its selective interaction with guest molecules (PAHs) in RP-HPLC. We have observed that the carbonyl groups in Sil-DSG exist in ordered state by forming a condensing thin layer over silica surface while DBG cannot form such an ordered state due to its lower order of short alkyl chain. The ordered carbonyl groups present in Sil-DSG promotes multiple carbonyl pi-benzene pi interactions with guest PAHs isomers which enhance the selectivity for these compounds. The contribution of pi-pi interactions was also supported by the substantial effects on the selectivity of benzene and nitrobenzenes. The effect of pi-electron containing solvent on the retention behavior of the PAHs was also studied. The selectivity for nucleic acid constituents, i.e. nucleosides and its bases were also evaluated by Sil-DSG and the selectivity for these compounds on Sil-DSG was compared with the selectivity of conventional polymeric ODS phase. It has been found that Sil-DSG provided higher selectivity for nucleic acid constituents than polymeric ODS and that HPLC packing materials can be efficiently employed for routine analysis of these compounds. The effect of methanol content on the separation behavior of nucleosides was also studied.     

Structural characteristics and cyclic voltammetric behaviour of Sonogel-Carbon tyrosinase biosensors. A detailed comparative study of three immobilization matrixes

Structural characteristics an cyclic voltammetry of three amperommetric biosensors based on immobilization of tyrosinase on a Sonogel-Carbon electrode for detection of phenols are described. Cyclic voltammetry was applied to study the electrochemical behaviour of the electrode and the electrochemical reaction on the electrode surface. Scanning electron microscopy, X-ray energy dispersive spectroscopy and atomic force microscopy were used for the structure characterization of the electrode surface, enzyme film and polymers coatings. The influence of additive-protective polymers, such as polyethylene glycol and perfluorinated-Nafion ion-exchanger on the surface of the biosensor were explored.     

Nanostructured graded-index antireflection layer formation on GaN for enhancing light extraction from light-emitting diodes

We describe the fabrication and characterization of a randomly etched gallium nitride (GaN) surface for enhancing light extraction from light-emitting diodes. Our technique uses silica spheres as nano-targets in a sputter-etch process and produces a fine-grained surface with features around 35 nm. The textured surface layer acts as a graded refractive index layer with antireflection properties. Measurements show that photoluminescence intensity from such treated surfaces on a GaN LED wafer increases 2.2?times over that from pristine surfaces. These findings are also supported by computer modelling studies described here.     

Performance investigation of an advanced tracked prime mover on the low bearing soil

This study has presented a performance investigation of an advanced tracked prime mover for the operation of agricultural goods and other operations on peat terrain. The maximum and continuous traction torque of the prime mover has been developed by designing an advanced controller for controlling the intelligent system. The prime mover’s mobility is studied with ultrasonic displacement sensor, torque transducer, National Instrument cRIO-9004 Compact-RIO Real-time Controller Unit (RCU), a National Instrument TPC 2106T Touch Panel Control (TPC), a Trimble AG132 GPS antenna and receiver unit, and a Dlink DIR-655 router. The fuzzy logic controller (FLC) has been equipped with the prime mover hydraulic system to increase the traction torque of the hydraulic motor when the prime mover’s sinkage is more than or equal to 70 mm. The prime mover’s design demonstrates good potential in traversing peat terrain as the measured tractive effort was found to be 48% of the vehicle’s gross weight while the recommended tractive effort is in the range of 30–36% of the vehicle’s gross weight.     

Amphitropic liquid crystals. Two lamellar phases in a surfactant containing thermotropic and lyotropic mesogenic groups

Abstract

We have studied the lyotropic liquid-crystalline behaviour of cationic surfactants containing a potentially thermotropic moiety, a terminal cyanobiphenyloxy group. Both mono-alkyl and mid-chain substituted dialkyl surfactants have been examined using optical microscopy and NMR spectroscopy. Incorporation of the cyanobiphenyloxy group destabilizes the hexagonal and bicontinuous cubic phases, with only an extensive lamellar region being observed. For the dialkyl surfactant there is a range of compositions where two lamellar phases co-exist, one water-rich and the second surfactant-rich.     

Accuracy and CPU time of JE-TLM,PLRC-TLM and CRC-TLM methods for plasma medium

The current density (JE), the piecewise linear recursive convolution (PLRC) and the constant convolution recursive (CRC) techniques are developed and integrated into the transmission line matrix (TLM) algorithm. A comparison of these three schemes according to the criteria of accuracy and CPU time is presented. Numerical experiments show that JE provides the most accurate solution and requires the least CPU time; PLRC is nearly as accurate but consumes more CPU time than CRC.     

Synthesis,anti‐migration and burning rate catalytic mechanism of ferrocene‐based compounds

One of the most important components of solid rocket propellant is the burning rate catalysts (BRC) which enhance burning rate of solid composite propellant. Low‐pressure exponents and stable burning rate are the key features of an excellent solid propellant. Addition of BRC to the propellant results in the increase of burning rate of the propellant and decrease in pressure exponents. Among all BRC, ferrocene‐based BRC have attracted much attention because of their better microscopic homogeneities in distribution, ignitability of the propellants and good compatibility with organic binder. However, the main barrier for the development and practical applications of ferrocene‐based BRC is their migration property. This article reviews the field and highlights recent progress. Copyright © 2014 John Wiley & Sons, Ltd.     

Efficient and Alternative Approach for Preparation of O-Benzoyloximes Using Benzoyl Peroxide

Benzoyl peroxide has been used as a mild and efficient reagent for the preparation of benzoyl ester of oxime in moderate to good yields.