Transient Non-Thermal Mobility of CO for CO--NO Catalytic Reaction on Square Lattice: Monte Carlo Simulation

We study a model based on precursor mechanism for CO-NO catalytic reaction on square lattice with Monte Carlo simulation. The precursor mechanism clearly demonstrates its impact on the phase diagram. The steady reactive state （SRS） gets established. The width of reactive region increases by increasing the range of precursor mobility. When the precursor mobility is increased to third-nearest neighbourhood, the second-order transition disappears.     

1,5-Benzothiazepine Derivatives: Green Synthesis,In Silico and In Vitro Evaluation as Anticancer Agents

Considering the importance of benzothiazepine pharmacophore, an attempt was carried out to synthesize novel 1,5-benzothiazepine derivatives using polyethylene glycol-400 (PEG-400)-mediated pathways. Initially, different chalcones were synthesized and then subjected to a cyclization step with benzothiazepine in the presence of bleaching clay and PEG-400. PEG-400-mediated synthesis resulted in a yield of more than 95% in less than an hour of reaction time. Synthesized compounds 2a–2j were investigated for their in vitro cytotoxic activity. Moreover, the same compounds were subjected to systematic in silico screening for the identification of target proteins such as human adenosine kinase, glycogen synthase kinase-3β, and human mitogen-activated protein kinase 1. The compounds showed promising results in cytotoxicity assays; among the tested compounds, 2c showed the most potent cytotoxic activity in the liver cancer cell line Hep G-2, with an IC₅₀ of 3.29 ± 0.15 µM, whereas the standard drug IC₅₀ was 4.68 ± 0.17 µM. In the prostate cancer cell line DU-145, the compounds displayed IC₅₀ ranges of 15.42 ± 0.16 to 41.34 ± 0.12 µM, while the standard drug had an IC₅₀ of 21.96 ± 0.15 µM. In terms of structural insights, the halogenated phenyl substitution on the second position of benzothiazepine was found to significantly improve the biological activity. This characteristic feature is supported by the binding patterns on the selected target proteins in docking simulations. In this study, 1,5-benzothiazepines have been identified as potential anticancer agents which can be further exploited for the development of more potent derivatives.     

Performance evaluation of k 0-instrumental neutron activation analysis and flame atomic absorption spectrophotometry in the characterization of various types of alloys

Certified alloys of Ni–Cu based, Fe based and Cu–Sn based were analysed by semi-absolute, standardless k ₀-instrumental neutron activation analysis (k ₀-INAA) and flame atomic absorption spectrophotometry (FAAS) aiming at evaluating their comparative performances. In k ₀-INAA measurements, the irradiations were performed at miniaturized neutron source reactor having thermal neutron flux of about 1 × 10¹² cm^?2 s^?1. The experimentally optimized parameters for INAA suggested a maximum of three irradiations for the quantification of 21 elements within 5 days. The same experiments also produced quantitative results of 13 elements not reported in the certificates of the reference materials. AAS was, however, unable to determine any of those elements. Accuracy of the two techniques was assessed by comparing their average root mean squared errors. The data analysis concluded that k ₀-INAA had better sensitivity and accuracy than FAAS.     

Design,synthesis and antibacterial activity evaluation of novel 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide derivatives

In this paper, a novel series of 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide derivatives are synthesized in two steps. The first step involved Ugi multicomponent reaction of β-alanine, o-(propargyl)benzaldehyde and isocyanide derivatives. The product of this step, underwent a click 1,3-dipolar cycloaddition reaction with benzyl azide derivatives. The 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide product was characterized and their antibacterial activities were evaluated against various G-positive (Staphylococcus aureus and Bacillus subtilis) and G-negative (Pseudomonas aeruginosa and Escherichia coli) bacteria, using minimal inhibition concentration. The compounds showed very good antimicrobial activity and a number of products have been more active than ciprofloxacin.     

New stereoselective syntheses of cis- and trans-2-methyl-4-arylpiperidines

A stereoselective approach has been developed for the synthesis of cis- and trans-2-methyl-4-arylpiperidines from a common intermediate. The Ni-catalyzed hydrogenolysis of N-Boc-2-methyl-4-aryl-4-piperidinols, obtained by addition of organometallic reagents on N-Boc-2-methyl-4-piperidone, afforded the trans derivatives with up to 95% selectivity whereas the corresponding cis isomers were obtained in the presence of palladium catalysts.     

Determination of haloacetic acids in water using layered double hydroxides as a sorbent in dispersive solid‐phase extraction followed by liquid chromatography with tandem mass spectrometry

In the present study, highly efficient and simple dispersive solid‐phase extraction procedure for the determination of haloacetic acids in water samples has been established. Three different types of layered double hydroxides were synthesized and used as a sorbent in dispersive solid‐phase extraction. Due to the interesting behavior of layered double hydroxides in an acidic medium (pH?4), the analyte elution step was not needed; the layered double hydroxides are simply dissolved in acid immediately after extraction to release the analytes which are then directly introduced into a liquid chromatography with tandem mass spectrometry system for analysis. Several dispersive solid‐phase extraction parameters were optimized to increase the extraction efficiency of haloacetic acids such as temperature, extraction time and pH. Under optimum conditions, good linearity was achieved over the concentration range of 0.05–100 μg/L with detection limits in the range of 0.006–0.05 μg/L. The relative standard deviations were 0.33–3.64% (n = 6). The proposed method was applied to different water samples collected from a drinking water plant to determine the concentrations of haloacetic acids.     

Accumulation of uranium by filamentous green algae under natural environmental conditions

The capacity of algae to concentrate uranium under natural environmental conditions is measured by a-spectrometry. Spirogyra, a filamentous green fresh-water alga, has concentrated uranium from a surface concrete ponds with elevated uranium levels (140-1140 ppb). The concentration factors (CFs) ranged from 8.9-67 with an average value of 22.Cladophora spp, a filamentous green marine alga has concentrated uranium from the marine water with a concentration factor ranged from 220–280. The average concentration factor was 250. The factors affecting the sorption process are discussed in detail. This revised version was published online in July 2006 with corrections to the Cover Date.     

Simple and sensitive LC‐ESI‐MS method for the quantitation of sildenafil in plasma samples

Sildenafil is a selective inhibitor of phosphodiesterase type 5 enzyme. A simple and sensitive LC‐MS assay was developed to determine the concentration of sildenafil in human plasma. Sildenafil and omeprazole (internal standard) were extracted from the plasma with diethyl ether. The extract was evaporated under nitrogen and the residue was constituted with ACN and injected onto Novapak C₁₈ column (75×3.9 mm, 4 μm). The mobile phase consisted of 90% ACN plus 10% ammonium acetate (20 mM) containing 0.02% formic acid and was delivered isocratically at a flow rate of 0.2 mL/min. Sildenafil and omeprazole were monitored using a positive electrospray mode with single‐ion recording set at m/z 475 and 346, respectively, which are consistent with [M+H]⁺ molecular ions, and the run time was less than 5 min. The detection limit of sildenafil was 0.5 ng/mL, and the calibration curve was linear between 0.5 and 2000 ng/mL (R²>0.99). Within‐ and between‐day coefficients of variation were less than 7%. This method has been successfully used to measure sildenafil plasma concentrations in a beagle dog model following an oral administration of the drug.     

Tailoring the optical and magnetic properties of La-BaM hexaferrites by Ni substitution

We investigate the impact of Ni insertion on the structural,optical,and magnetic properties of Ba_0.8La_0.2Fe_12-xNi_xO₁₉hexaferrites(Ni substituted La-BaM hexaferrites).Samples were prepared using the conventional co-precipitation method and sintered at 1000℃for 4 hours to assist the crystallization process.An analysis of the structure of the samples was carried out using an x-ray diffraction(XRD)spectrometer.The M-type hexagonal structure of all the samples was confirmed using XRD spectra.The lattice parameters a and c were found to be in the ranges of 5.8925±0.001 nm–5.8952±0.001 nm and 23.2123±0.001 nm–23.2219±0.001 nm,respectively.The M-type hexagonal nature of the prepared samples was also indicated by the presence of corresponding FT-IR bands and Raman modes in the FT-IR and Raman spectra,respectively.EDX results confirmed the successful synthesis of the samples according to the required stoichiometric ratio.A UV-vis spectrometer was used to record the absorption spectra of the prepared samples in the wavelength range of 200 nm–1100 nm.The optical energy bandgap of the samples was found to be in the range of 1.21 eV–3.39 eV.The M–H loops of the samples were measured at room temperature at an applied magnetic field range of 0 kOe–60 kOe.A high saturation magnetization of 99.92 emu/g was recorded in the sample with x=0 at a microwave operating frequency of 22.2 GHz.This high value of saturation magnetization is due to the substitution of La3+ions at the spin-up(12k,2a,and 2b)sites.The Ni substitution is proven to be a potential candidate for the tuning of the optical and magnetic parameters of M-type hexaferrites.Therefore,we suggest that the prepared samples are suitable for use in magneto-optic applications.