Synthesis, structure, and ligand-based reduction reactivity of trivalent organosamarium benzene chalcogenolate complexes (C(5)Me(5))(2)Sm(EPh)(THF) and [(C(5)Me(5))(2)Sm(mu-EPh)](2)

To compare the ligand-based reduction chemistry of (EPh)(-) ligands in a metallocene environment to the sterically induced reduction chemistry of the (C(5)Me(5))(-) ligands in (C(5)Me(5))(3)Sm, (C(5)Me(5))(2)Sm(EPh) (E = S, Se, Te) complexes were synthesized and treated with substrates reduced by (C(5)Me(5))(3)Sm: cyclooctatetraene; azobenzene; phenazine. Reactions of PhEEPh with (C(5)Me(5))(2)Sm(THF)(2) and (C(5)Me(5))(2)Sm produced THF-solvated monometallic complexes, (C(5)Me(5))(2)Sm(EPh)(THF), and their unsolvated dimeric analogues, [(C(5)Me(5))(2)Sm(mu-EPh)](2), respectively. Both sets of the paramagnetic benzene chalcogenolate complexes were definitively identified by X-crystallography and form homologous series. Only the (TePh)(-) complexes show reduction reactivity and only upon heating to 65 degrees C.     

An initial assessment of the use of gradient elution in microemulsion and micellar liquid chromatography

Novel microemulsion and micellar HPLC separations have been achieved using gradient elution and columns packed with reverse phase material. Initial attempts at gradient microemulsion liquid chromatography proved impossible on use of a microemulsion successfully used in capillary electrophoresis. Optimisation of the microemulsion composition allowed the generation of stable microemulsions to achieve separations in HPLC. The novel use of organic-solvent micellar chromatography in gradient elution mode was shown to give efficient separations. A range of efficient separations of pharmaceuticals and related impurities were obtained. Acidic, basic, and neutral solutes were resolved covering a wide range of water solubilities and polarities. Elution times were in the order of 4-15 minutes. Separations were briefly compared to those accomplished with a micellar HPLC system. It is proposed that gradient elution in both microemulsion and micellar HPLC can be regarded as a highly successful means of achieving resolution of complex mixtures and should be considered for routine analysis and further investigation.     

Electron transfer in environmental systems: a frontier for theoretical chemistry

The advances in understanding the kinetic behavior of certain environmental electron transfer (ET) systems are presented. Emphasis is placed on the homogeneous ET chemistry of transition metals, particularly the Fe^II/III system, in various relevant forms. In the context of modern ET theory, we examine the utility of computational chemistry methods for the calculation of ET quantities such as the reorganization energy and electronic coupling matrix element. We discuss successful application of the methods to topics of homogeneous oxidation of dissolved metal ions by molecular oxygen in aqueous solution, as well as the prediction of electron mobility in solid phase iron oxide crystals. The examples illustrate the significant potential for many more advances in understanding environmental ET systems through the combination of ET theory and computational chemistry.     

The influence of alpha1-acid glycoprotein on collagenase-3 activity in early rheumatoid arthritis

The concentration and glycosylation of alpha(1)-acid glycoprotein (AGP) alter significantly during inflammation. A definitive physiological role for AGP remains elusive and is the subject of extensive investigation. This study investigated the influence of AGP on the activity of collagenase-3, an important mediator of cartilage destruction in rheumatoid arthritis. AGP was isolated from normal and rheumatoid plasma. Fucosylation was determined by high pH anion-exchange chromatography; sialylation was assessed following enzymatic digest. Rheumatoid AGP displayed elevated fucosylation and sialylation compared with normal. The influence of each sample on collagenase-3 activity was measured fluorometrically. AGP influenced collagenase-3 catalysis and collagen binding, with catalytic activity correlating with fucosylation. Rheumatoid AGP exhibited less efficient inhibition than normal plasma AGP. It is hypothesized that AGP within rheumatoid synovial fluid may be inadequate to prevent excessive cartilage destruction and hence may exacerbate the disease process.     

The synthesis and characterization of compounds of the type Hg[1-C(6)H(4)-2-C(H)=NC(6)H(5-n)R(n)](2)

The organomercurial compounds Hg[1-C(6)H(4)-2-C(H)=NC(6)H(5-n)R(n)](2) (R = 4-NMe(2), 6a; 4-Me, 6b; 4-I, 6c; 4-NO(2), 6d; 2-(i)Pr, 6e; 2-Me, 6f; 2,6-(i)Pr(2), 6g; 2,6-Me(2), 6h) have been prepared in good overall yield from 2-bromobenzaldehyde. All of the compounds have been characterized by elemental analysis, (1)H NMR, (13)C[(1)H] NMR, and infrared spectroscopy. In addition, compounds 6a [C(30)H(30)HgN(4), triclinic, P, a = 6.20000(10) A, b = 9.2315(2) A, c = 10.9069(3) A, alpha = 85.8510(10) degrees, beta = 89.3570(10) degrees, gamma = 87.206(2) degrees, Z = 1], 6b [C(28)H(24)HgN(2), monoclinic, P2(1)/c, a = 12.8260(5) A, b = 14.0675(4) A, c = 6.1032(2) A, beta = 90.0990(10) degrees, Z = 2], 6g [C(38)H(44)HgN(2), triclinic, P, a = 8.2626(2) A, b = 9.8317(2) A, c = 11.8873(3) A, alpha = 103.6650(10) degrees, beta = 109.3350(10) degrees, gamma = 104.627(2) degrees, Z = 1], and 6h [C(30)H(28)HgN(2), monoclinic, P2(1)/c, a = 12.5307(2) A, b = 10.9852(2) A, c = 18.2112(2) A, beta = 104.0190(10) degrees, gamma = 87.206(2) degrees, Z = 4] have been characterized by low-temperature single-crystal X-ray diffraction studies, and two different molecular geometries about the central mercury atom have been observed; intramolecular contacts suggest a van der Waals radius for Hg of 2.1-2.2 A.     

Structure, modelling and dynamic behaviour of aza- and azaoxamacrocyclic ligands derived from (R,R)-1,2-diaminocyclohexane

Investigations into the conformational behaviour of macrocyclic ligands 5 and 6 derived from (R,R)-1,2-diaminocyclohexane have been undertaken using molecular modelling, single crystal X-ray diffraction and variable temperature 1H NMR spectroscopy. These have revealed that the lowest energy conformers in both cases do not possess the expected C2-element of symmetry, which can only be accessed at higher temperatures. Instead both molecules exist as C1-conformers at room temperature and in the solid state. In solution a range of dynamic exchange processes is observed which result, in part from the inherent strain in these fused bicyclic systems. An unexpected but characteristic feature of the C1-symmetric conformers is highlighted by the presence of a signal at unexpectedly low field in their 1H NMR spectra due to the interaction of two of the sulfonyl oxygen atoms with one of the bridgehead hydrogen atoms.     

Methane dissociative adsorption on the Pt(111) surface over the 300-500 K temperature and 1-10 Torr pressure ranges

The dissociative adsorption of methane on the Pt(111) surface has been investigated and characterized over the 1-10 Torr pressure and 300-500 K temperature ranges using sum frequency generation (SFG) vibrational spectroscopy and Auger electron spectroscopy (AES). At a reaction temperature of 300 K and a pressure of 1 Torr, C-H bond dissociation occurs in methane on the Pt(111) surface to produce adsorbed methyl (CH(3)) groups, carbon, and hydrogen. SFG results suggest that C-C coupling occurs at higher reaction temperatures and pressures. At 400 K, methyl groups react with adsorbed C to form ethylidyne (C(2)H(3)), which dehydrogenates at 500 K to form ethynyl (C(2)H) and methylidyne (CH) species, as shown by SFG. By 600 K, all of the ethylidyne has reacted to form the dissociation products ethynyl and methylidyne. Calculated C-H bond dissociation probabilities for methane, determined by carbon deposition measured by AES, are in the 10(-8) range and increase with increasing reaction temperature. A mechanism has been developed and is compared with conclusions from other experimental and theoretical studies using single crystals.     

A stereoselective 3-endo-alkyl-5,6-dehydroisoquinuclidine synthesis.

Cycloaddition of N-carbethoxy-2-alkyl-1,2-dihydropyridines $\text{4}$ with phenylvinylsulfone $\text{5}$ provides adducts $\text{6}$, which upon desulfonylation afford stereoselectively N-carbethoxy-3-$\text{endo}$- alkyl-5,6-dehydroisoquinuclidines $\text{1}$.     

A calix(4)arene pyridine derivative and its monomeric component: structural and thermodynamic aspects of their complexation with metal cations

The interaction of a calix(4)arene derivative, namely 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra[2-(4-pyridyl)methoxy]calix(4)arene, 1a, and its monomeric component, p-tert-butylphenoxy-4-pyridine, 1b, with metal cations has been investigated in acetonitrile and methanol. (1)H NMR measurements carried out in CD(3)CN show the primary role played by the pyridyl nitrogens in their complexation with metal cations. Conductance measurements demonstrated that for all cations (except mercury) the composition of the metal ion complexes of 1a is 1:1 (ligand:metal cation). However, 1a hosts two mercury cations per unit of ligand. For the monomer 1b, complexes of 2:1 (ligand:metal cation) stoichiometries are formed with the exception of Pb(2+) (1:1 composition). The thermodynamics of complexation of these systems are reported in acetonitrile. Data in methanol are limited to stability constant values for mercury(II) and these ligands. This paper demonstrates for the first time that thermodynamic data for the complexation of the monomeric component of the ligand and metal cations contribute significantly to the interpretation of systems involving cation-calixarene interactions in solution.     

A kinetic and product study of the Cl + HO2 reaction

Absolute rate data and product branching ratios for the reactions Cl + HO2 --> HCl + O2 (k1a) and Cl + HO2 --> OH + ClO (k1b) have been measured from 226 to 336 K at a total pressure of 1 Torr of helium using the discharge flow resonance fluorescence technique coupled with infrared diode laser spectroscopy. For kinetic measurements, pseudo-first-order conditions were used with both reagents in excess in separate experiments. HO2 was produced by two methods: through the termolecular reaction of H atoms with O2 and also by the reaction of F atoms with H2O2. Cl atoms were produced by a microwave discharge of Cl2 in He. HO2 radicals were converted to OH radicals prior to detection by resonance fluorescence at 308 nm. Cl atoms were detected directly at 138 nm also by resonance fluorescence. Measurement of the consumption of HO2 in excess Cl yielded k1a and measurement of the consumption of Cl in excess HO2 yielded the total rate coefficient, k1. Values of k1a and k1 derived from kinetic experiments expressed in Arrhenius form are (1.6 +/- 0.2) x 10(-11) exp[(249 +/- 34)/T] and (2.8 +/- 0.1) x 10(-11) exp[(123 +/- 15)/T] cm3 molecule(-1) s(-1), respectively. As the expression for k1 is only weakly temperature dependent, we report a temperature-independent value of k1 = (4.5 +/- 0.4) x 10(-11) cm3 molecule(-1) s(-1). Additionally, an Arrhenius expression for k1b can also be derived: k1b = (7.7 +/- 0.8) x 10(-11) exp[-(708 +/- 29)/T] cm3 molecule(-1) s(-1). These expressions for k1a and k1b are valid for 226 K < or = T < or = 336 and 256 K < or = T < or = 296 K, respectively. The cited errors are at the level of a single standard deviation. For the product measurements, an excess of Cl was added to known concentrations of HO2 and the reaction was allowed to reach completion. HCl product concentrations were determined by IR absorption yielding the ratio k1a/k1 over the temperature range 236 K < or = T < or = 296 K. OH product concentrations were determined by resonance fluorescence giving rise to the ratio k1b/k1 over the temperature range 226 K < or = T < or = 336 K. Both of these ratios were subsequently converted to absolute numbers. Values of k1a and k1b from the product experiments expressed in Arrhenius form are (1.5 +/- 0.1) x 10(-11) exp[(222 +/- 17)/T] and (10.6 +/- 1.5) x 10(-11) exp[-(733 +/- 41)/T] cm3 molecule(-1) s(-1), respectively. These expressions for k1a and k1b are valid for 256 K < or = T < or = 296 and 226 K < or = T < or = 336 K, respectively. A combination of the kinetic and product data results in the following Arrhenius expressions for k1a and k1b of (1.4 +/- 0.3) x 10(-11) exp[(269 +/- 58)/T] and (12.7 +/- 4.1) x 10(-11) exp[-(801 +/- 94)/T] cm3 molecule(-1) s(-1), respectively. Numerical simulations were used to check for interferences from secondary chemistry in both the kinetic and product experiments and also to quantify the losses incurred during the conversion process HO2 --> OH for detection purposes.