Combining rule for interaction energies of the (CO)2, (N2)2 and CO-N2 complexes

The relationship between interaction energies of the most stable structures of the (CO)₂, (N₂)₂ and CO-N₂ complexes is investigated using the supermolecule CCSD(T) and MP4 methods and aug-cc-pVXZ (X = D,T,Q) basis sets extended by a set of midbond functions centred in the middle of the intermolecular bond. A simple combining rule for interaction energies of this triad of clusters is proposed.     

Remarkable bismuth-gold alloy decorated on MWCNT for glucose electrooxidation: the effect of bismuth promotion and optimization via response surface methodology

In this study, the carbon nanotube supported gold, bismuth, and gold-bismuth(Au/MWCNT, Bi/MWCNT, and Au-Bi/MWCNT) nanocatalysts were prepared with NaBH₄ reduction method at varying molar atomic ratio for glucose electrooxidation (GAEO). The synthesized nanocatalysts at different Au: Bi atomic ratios are characterized via x - ray diffraction (XRD), transmission electron microscopy (TEM), and N₂ adsorption-desorption. For the performance of AuBi/MWCNT for GAEO, electrochemical measurements are performed by using different electrochemical techniques namely cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). Monometallic Au/MWCNT exhibits higher activity than Bi/MWCNT with 256.57 mA/mg (0.936 mA/cm²) current density. According to CV results, Au₈₀Bi₂₀/MWCNT nanocatalyst has the highest GAEO activity with the mass activity of 320.15 mA/mg (1.133 mA/cm²). For Au₈₀Bi₂₀/MWCNT, central composite design (CCD) is utilized for optimum conditions of the electrode preparation. Au₈₀Bi₂₀/MWCNT nanocatalysts are promising anode nanocatalysts for direct glucose fuel cells (DGFCs).     

Synthesis of nonperipherally tetra-[5-(diethylamino)-2-formylphenoxy] substituted metallophthalocyanines and their electrochemistry

3-[5-(diethylamino)-2-formylphenoxy]phthalonitrile ( n-TY-CN ), metallophthalocyanines n-TY-Co , n-TY-Cu , and n-TY-Mn bearing [5-(diethylamino)-2-formylphenoxy] groups at nonperipheral positions were prepared for the first time. These compounds were characterized with IR, NMR (only for n-TY-CN ), mass and UV-vis (except n-TY-CN ) spectroscopy. Voltammetric characterizations of n-TY-Co , n-TY-Cu , and n-TY-Mn revealed that while n-TY-Co , n-TY-Cu , and n-TY-Mn showed characteristic Pc ring and/or metal-based reduction reaction, n-TY-Co , n-TY-Cu , and n-TY-Mn were coated on the working electrode during the oxidation processes owing to the cationic electropolymerizations of the [5-(diethylamino)-2-formylphenoxy] substituents.     

A water isotope (2H, 17O, and 18O) spectrometer based on optical feedback cavity-enhanced absorption for in situ airborne applications

Measurements of the isotopic composition of water are thought to help explain stratospheric aridity and related issues in atmospheric sciences. Simultaneous in situ measurements of ²H/¹H, ¹⁷O/¹⁶O, and ¹⁸O/¹⁶O at high spatial resolution are required for this purpose. We present the design and laboratory performance of a device that will be used on high-altitude research aircraft. It is based on optical feedback cavity-enhanced spectroscopy (OF-CEAS), with better sensitivity than traditional multi-pass arrangements. It utilizes a near-infrared laser source, avoiding the need for cryogens. We demonstrate an airborne precision during tropospheric flight conditions of 1 ‰, 3 ‰, and 9 ‰ for δ¹⁸O, δ¹⁷O, and δ²H, respectively, for 30-s averaged data and a water concentration of about 200 ppm. With recent improvements we expect to remain within a factor of about three of these values under true stratospheric conditions (water mixing ratio ∼10 ppmv). PACS 07.88.+y; 42.55.Px; 42.62.Fi; 92.60.Hd; 92.60.Jq     

Removal of COD,aromaticity and color of a pretreated chemical producing industrial wastewater: a comparison between adsorption,ozonation, and advanced oxidation processes

A wide range of products are produced in the chemical producing industry such as textile dyes, chemicals, printing dyes and chemicals, paper chemicals, electrostatic powder dyes, and optical brighteners. The aim of this study is to investigate the treatability of chemical oxygen demand (COD), aromaticity, and color in the wastewater of this sector, where highly complex chemicals are used. Most of the studies in the literature are related to the treatment of synthetically prepared dyed wastewater. This study is important as it is carried out with real wastewater and gives results of many treatment methods. In the study, COD, UV-vis absorbance, and color values were attempted to be removed from the wastewater of a chemical producing industry that was pretreated by coagulation-flocculation. The COD value of the pretreated wastewater discharged to the central treatment system was restricted as 1000 mg/L. Pretreated wastewater characterization is as follows: COD: 2117 mg/L, UV-vis absorbance values at; 254 nm: 9.91, 280 nm: 8.65, 341 nm: 12.77, 436 nm: 5.01, 525 nm: 2.24, and 620 nm: 1.59. In the study, adsorption, ozonation, and advanced oxidation processes (Fenton and persulfate oxidation) were used to remove COD and UV-vis absorbance values (aromaticity, organics, and color). The method by which the best removal efficiency was obtained for all parameters was the adsorption process using powdered activated carbon (PAC). The equilibrium PAC dose was found as 6 g/L. At this adsorbent dose, the removal efficiencies of UV-vis absorbance values were all around 99% and the efficiency of COD removal was 77%. The Langmuir isotherm constants were found to be q_max= 30.4 mg/g and K_L = 487.9 (L/mg). The COD concentration at this adsorbent dose was 486 mg/L and wastewater was suitable for discharge to the central wastewater treatment plant in that region.     

Assessment of the amount of body water in the Red Knot (Calidris canutus): an evaluation of the principle of isotope dilution with 2H, (17)O, and (18)O as measured with laser spectrometry and isotope ratio mass spectrometry

We have used the isotope dilution technique to study changes in the body composition of a migratory shorebird species (Red Knot, Calidris canutus) through an assessment of the amount of body water in it. Birds were quantitatively injected with a dose of water with elevated concentrations of 2H, (17)O, and (18)O. Thereafter, blood samples were taken and distilled. The resulting water samples were analysed using an isotope ratio mass spectrometry (for 2H and (18)O only) and a stable isotope ratio infrared laser spectrometry (2H, (17)O, and (18)O) to yield estimates of the amount of body water in the birds, which in turn could be correlated to the amount of body fat. Here, we validate laser spectrometry against mass spectrometry and show that all three isotopes may be used for body water determinations. This opens the way to the extension of the doubly labelled water method, used for the determination of energy expenditure, to a triply labelled water method, incorporating an evaporative water loss correction on a subject-by-subject basis or, alternatively, the reduction of the analytical errors by statistically combining the (17)O and (18)O measurements.     

AlSb-GaSb-InSb体系的研究

用区域致匀方法获得了AlSb-GaSb-InSb体系中均匀的合金。用X射线结构分析(粉末法)及差热分析研究了均匀化的样品。结果表明,在上述体系中有连续固溶体生成。确定了AlSb-GaSb-InSb体系液相面的投影图及AlSb·GaSb-InSb截面上组成与晶格参数间的关系,并比较了组成不同的合金在空气中的稳定性。     

Detection of bacteria using antimicrobial polymer derived via ring-opening metathesis (romp) pathway

There is growing interest in the detection of bacteria in consumables, for example, in the food and water sectors. In this study, the aim was to produce a polymer-based bacteria biosensor via ROMP (ring opening metathesis polymerization). In the first part of the study, block and random copolymers were synthesized, and their biocidal activities were tested on the glass surface. Interdigitated electrode arrays coated with the polymers possessing the highest activity were used to screen the affinity towards different bacterial strains by monitoring impedance variations in real-time. The polymer-coated electrode could detect gram-positive and gram-negative bacteria strains at a concentration of 10⁷ cfu/mL. The results show that ROMP-based polymer offers bacterial detection and can be used in developing biosensor devices for efficiently detecting pathogenic bacteria.     

Supercritical carbon dioxide extraction of Usnea longissima (L.) Ach.: Optimization by Box-Behnken design (BBD)

Usnic acid (UA) was extracted from Usnea longissima (L.) Ach. in supercritical carbon dioxide (SC-CO₂) medium. The selected process parameters were extraction temperature (35–45 °C), amount of co-solvent (0%–5%) and extraction time (5–9 h). These parameters were applied to Box-Behnken design (BBD) belonging to response surface methodology (RSM) to determine optimum process parameters for the highest amount of UA in the extract. g UA/100g lichen, extraction yield % and UA content values were calculated in the range of 0.045–0.317, 2.77–5.4 and 71%–82% in different experimental conditions, respectively. The optimum conditions were predicted as 42 °C, 4.3% (ethanol) and 7.48 h. It was determined that the predicted and experimental values of g UA/100g lichen were compatible, and the suggested model was valid.