From tetragermacyclobutene to tetragermacyclobutadiene dianion to tetragermacyclobutadiene transition metal complexes

The reaction of 3,4-dichlorotetragermetene derivative 2 with Na(2)[Fe(CO)(4)] in THF produced a (tetragermacyclobutadiene)tricarbonyliron complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]Fe(CO)(3)4, which has a slightly folded Ge(4) ring perhaptocoordinated to the Fe center. Structural and spectral characteristics of 4 show a remarkable π-donating ability of the tetragermacyclobutadiene ligand toward the transition metal, surpassing that of tetrasilacyclobutadiene and cyclobutadiene ligands. Reduction of 2 with KC(8) resulted in exclusive formation of the dipotassium salt of the tetragermacyclobutadiene dianion derivative 3(2-)·[K(+)(thf)(2)](2), representing a rare example of a 6π-electron compound that, on the basis of its structural and magnetic properties, was recognized as a nonaromatic species. Reaction of 3(2-)·[K(+)(thf)(2)](2) with CpCoI(2)(PPh(3)) produced a (cyclopentadienyl)(tetragermacyclobutadiene)cobalt complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]CoCp 7, as the first example of a sandwich compound featuring an all-germanium-containing cyclic polyene ligand.     

Aggregation-induced emission and thermally activated delayed fluorescence of 2,6-diaminobenzophenones

Exploration of novel organic luminophores that exhibit thermally activated delayed fluorescence (TADF) in the aggregated state is very crucial for advance of delayed luminescence-based applications such as time-gated bio-sensing and temperature sensing. We report herein that synthesis, photophysical properties, molecular and crystal structures, and theoretical calculations of 2,6-bis (diarylamino)benzophenones. Absorption spectra in solution and calculations using density functional theory (DFT) method revealed that the optical excitation took place through intramolecular charge-transfer from one diarylamino moiety to an aroyl group. While the benzophenones did not luminesce in solution, the solids of the benzophenones emitted green light with moderate-to-good quantum yields. Thus, the benzophenones exhibit aggregation-induced emission. Based on the lifetime measurement, the green emission of the solids was found to include TADF. The emergence of the TADF is supported by the small energy gap between the excited singlet and triplet states, which was estimated by time-dependent DFT calculations. Thin films of poly(methyl methacrylate) doped by the benzophenones also showed green prompt and delayed fluorescence whose lifetimes were in the order of microseconds. Linear correlation between logarithm value of TADF lifetime and temperature was observed with the benzophenone in powder, suggesting that the benzophenones can serve as molecular thermometers workable under aqueous conditions.     

A benchmark quantum Monte Carlo study of the ground state chromium dimer

We report calculations of the ground state energy and binding curve of the chromium dimer using the variational and diffusion quantum Monte Carlo (VMC and DMC) methods. We examined various single‐determinant and multideterminant wavefunctions multiplied by a Jastrow factor as a trial/guiding wavefunction for VMC/DMC. The molecular orbitals in the single determinants were calculated using restricted or unrestricted Hartree–Fock or density functional theory (DFT) calculations where five commonly used local (SVWN5), semilocal (PW91 and BLYP), and hybrid (B1LYP and B3LYP) functionals were examined. The multideterminant expansions were obtained from the generalized valence bond and (truncated) unrestricted configuration interaction with single and double excitations (UCISD) methods. We also examined a UCISD wavefunction in which UCISD expansions were added to the UB3LYP single‐determinant reference, and their coefficients were optimized at the VMC level. In addition to the wavefunction dependence, the effects of pseudopotentials and backflow transformation were also investigated. The UB3LYP single‐determinant and multideterminant wavefunctions were found to give the variationally best DMC energies within the framework of single‐determinant and multideterminants, respectively, though both the DMC energies were higher than twice the DMC atomic energy. Some of the VMC binding curves show a flat or quite shallow well bottom, which gets recovered deeper by DMC. All the DMC binding curves have a minimum indicating a bound state, but the unrestricted ones overestimate the equilibrium bond length. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Structure of liquid-crystalline phases formed by N-acetyl-L-glutamic acid oligomeric benzyl esters –2H NMR study

A series of N-acetyl-L-glutamic acid oligopeptide benzyl esters with exact residue numbers 4, 6, and 12 has been synthesized by a stepwise procedure. For these oligopeptide–dioxane binary systems, the behavior of the liquid-crystalline phases has been examined␣by the use of ²H NMR, and the results indicate that highly ordered aggregates formed by these oligopeptides in dioxane are in an alignment similar to that in a nematic mesophase. Received: 27 February 2001 Accepted: 8 May 2001     

Synthesis of Functionalized (η5‐Indenyl)rhodium(III) Complexes and Their Application to C−H Bond Functionalization

It has been established that reductive complexation of functionalized benzofulvenes, which are readily prepared from commercially available indene and 2‐methylindene, with RhCl₃ in ethanol affords the corresponding indenyl–rhodium(III) dichlorides bearing substituents at the 1‐ (H or CO₂Et), 2‐ (H or Me), and 3‐ [CH₂Ph or CH₂(2‐MeOC₆H₄)] positions. The indenyl–rhodium(III) complexes bearing one ethoxycarbonyl group showed higher thermal stability and regioselectivity than our previously reported Cp^ERh^III complex toward the oxidative [3+2] annulation of acetanilides with internal alkynes.     

Siladenoserinols M–P,sulfonated serinol derivatives from a tunicate

Four new sulfonated serinol derivatives, siladenoserinols M–P (1–4), were isolated from a tunicate of the family Didemnidae collected in Indonesia. Their chemical structures were elucidated by the interpretation of NMR and mass spectroscopic data. Two of them (2 and 4) were revealed to be disulfonate serinol derivatives, and the others were monosulfonates. Siladenoserinols A (5) and B (6), which we previously isolated from the same tunicate, inhibited the p53–Hdm2 interaction with an IC₅₀ value of 2.0?μM. However, 1–4 did not inhibit the activity. The result suggested that the acetyl group in the bicyclic ketal unit and/or the glycerophospholipid moiety in 5 and 6 were responsible for the inhibition of the p53–Hdm2 interaction.     

Synthesis of dendritic bisphosphonates as bone targeting ligands

A dendritic bisphosphonate carrying three bisphosphonate (BP) units in close proximity was designed as a ligand to conjugate large therapeutic molecules for their bone selective delivery. The Bu₃P-catalyzed conjugate addition of nitromethane to vinylidene bisphosphonate was effective to construct a quaternary carbon center carrying BP units. Owing to multivalent interactions, the dendritic bisphosphonate showed considerable affinity for the bone mineral hydroxyapatite even in the presence of a competitor, demonstrating potential as a bone targeting ligand.     

Single-step preparation of topological gels using vinyl-modified β-cyclodextrin as a figure-of-six cross-linker

Herein, we have proposed a single-step preparation of topological gels using vinyl-modified β-cyclodextrin (V-β-CyD) and isoprene. Copolymerization of V-β-CyD and isoprene in an aqueous solution resulted in gelation due to V-β-CyD acting as a novel type of copolymer chain cross-linker. The vinyl moiety of V-β-CyD becomes a part of the copolymer, while the β-CyD moiety of V-β-CyD simultaneously incorporates the isoprene component of the copolymer. V-β-CyD is capable of two different modes of cross-linking at each end, i.e., chemically bonding and mechanically interlocking. Due to the shape of the cross-linking point, we refer to it as figure-of-six cross-linking. Nuclear magnetic resonance analysis showed that the gel contained V-β-CyD and isoprene in an approximately 1:0.3 stoichiometry. The relatively high content of β-CyD was reflected in the character of the gel; the gel swelled in dimethylformamide which is a good solvent of β-CyD. A fluorometric analysis using 6-(p-toluidino)-2-naphthalenesulfonic acid showed that the appended β-CyD was able to accommodate guest molecules. Introduction of an additional vinyl monomer into the gel was also successful. Addition of 4-vinylphenylboronic acid to the preparation procedure yielded a sugar-responsive gel that swelled in the presence of d-fructose.     

Alternative preparation and characterization of platinum(II) organometallic dinuclear complexes and oligomers with 3,8-diethynylphenanthroline derivatives

Novel platinum(II) organometallic dinuclear complexes and oligomers with two types of phenanthroline ligands, namely 3,8-diethynylphenanthroline (L1) and 3,8-bis-(4-ethynyl-phenylethynyl)-1,10-phenanthroline (L2), were synthesized from trans-Pt(PBu₃)₂(1-ethynyl-4-methyl-benzene)Cl and trans-Pt(PBu₃)₂Cl₂ by transmetalation of copper ion. The alternative procedure targeted platinum oligomer termination selection of either chloride or respective phenanthrolines and was successfully performed with different purifications by extraction and column chromatography. The structural formulae of these platinum complexes and oligomers were revealed with by analysis of both ³¹P{¹H}-NMR and ¹H-NMR spectral data. Alternative preparations of platinum oligomers with two types between chloride and respective phenanthroline termination are very useful for the selective synthesis for hybrid polymers with the coupling reaction with two different platinum oligomers with different diethynylaryl ligands. The platinum organometallic compounds showed similar absorption bands in the UV–Vis region. Those prepared with L1 had a strong absorption band at around 400 nm, assignable to the lowest energy metal-perturbed ¹[π–π*] transitions, while in compounds prepared with L2, the strong band appeared around 410 nm, because L2 has an extended π conjugation relative to L1. No distinct differences were observed in the absorption spectra of these platinum oligomers between the different terminal structures, chloride or various phenanthrolines. The luminescence spectra of the platinum compounds prepared with either L1 or L2, however, showed a distinct difference. Those with L1 showed only a phosphorescence assignable to a typical metal-perturbed ³[π–π*] transition with vibronic progressions centered at around 530 nm in deoxygenated CH₂Cl₂ at room temperature, while those with L2 showed weak dual emissions assignable to a mixture of typical metal-perturbed ¹[π–π*] and ³[π–π*] transitions in the visible region.