Preparation and properties of aromatic polymides from 2,2′-bibenzoic acid and aromatic diamines

Aromatic polyamides having inherent viscosities up to 1.8 dL/g were synthesized either by the direct polycondensation of 2,2′-bibenzoic acid with various aromatic diamines or by the low temperature solution polycondensation of 2,2′-bibenzoyl chloride with aromatic diamines. All the aromatic polyamides were amorphous and soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone, dimethyl sulfoxide, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polymides had glass transition temperatures in the range of 226-306deg;C and began to lose weight around 350°C in air.     

Total synthesis of (+)-pederin. 2. Stereocontrolled synthesis of (+)-benzoylselenopederic acid and total synthesis of (+)-pederin

(+)-Benzoylselenopederic acid (1), a left half of (+)-pederin (3), was synthesized stereoselectively based on the Zn(BH₄)₂ reduction and total synthesis of (+)-pederin (3) was accomplished from 1 and the previously synthesized 2.     

Dissolving metal reduction with crown ether — reductive decyanation

Toluene radical anion generated from potassium metal/dicyclohexano-18-crown-6/toluene system has been proved to be highly effective for reductive decyanation reaction of primary, secondary and tertiary cyanides.     

Asymmetric anionic polymerization of N‐1‐naphthylmaleimide with chiral ligand‐organometal complexes in toluene

Asymmetric anionic homopolymerizations of N‐1‐naphthylmaleimide (1‐NMI) were performed with chiral ligand/organometal complexes to form optically active polymers. Poly(1‐NMI)s obtained with methylene‐bridged bisoxazoline derivatives (Rbox)‐diethylzinc (Et₂Zn) complexes showed high specific optical rotations ([α]) from +152.3 to +191.4°. Circular dichroism spectra of the polymers exhibited a split Cotton effect in the UV absorption‐band region. According to the exciton chirality method, the absolute configuration of the polymer main chain was determined according to the following method: (+)‐poly[N‐substituted maleimides (RMI)] main chains can contain more (S,S)‐ than (R,R)‐configurations. (?)‐Poly(RMI) main chains can contain more (R,R)‐ than (S,S)‐configurations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3556–3565, 2001     

Synthesis of isomeric coumarin-fluorene hybrids by photocyclization and the photophysical features

We prepared isomeric compounds 2a and 2b having fused skeletons of coumarin and fluorene by photochemical cyclization of olefin 1. They were successfully separated by chromatography, and characterized by NMR spectroscopic and X-ray crystallographic analyses. The molecular structure of 2a was nonplanar due to the repulsion between the carbonyl group of the coumarin moiety and the methylene group at 9-position on the fluorene skeleton whilst that of 2b was planar. They showed different absorption and fluorescence features in solution whereas their spectral profiles of triplet–triplet absorption and phosphorescence were similar to each other.     

Preparation and properties of novel soluble aromatic polyimides from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing triphenylamine unit were prepared by two different methods, i.e., a conventional two-step method starting from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides and the one-step thioanhydride method starting from the aromatic diamine and aromatic tetracarboxylic dithioanhydrides. Both procedures yielded high-molecular-weight polyimides with inherent viscosities of 0.47–1.17 dL/g. Some of these polymers were soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, m-cresol, and pyridine. All the polyimides afforded transparent, flexible, and tough films, and the color varied from pale yellow to dark red, depending markedly on the tetracarboxylic acid components. The glass transition temperatures (T_gs) of these polyimides were in the range of 287–331°C and the 10% weight loss temperatures were above 520°C in air. The polyimides prepared by the one-step method exhibited better solubility in organic solvents and had somewhat lower T_gs than the polymers prepared by a conventional two-step method.     

Synthesis,Optical Properties,and Electronic Structures of Tetrakis(pentafluorophenyl)tetrathiaisophlorin Dioxide

The synthesis, structure, optical and redox properties, and electronic structure of tetrakis(pentafluorophenyl)tetrathiaisophlorin dioxide ( 12 ) are reported. Oxidation of tetrakis(pentafluorophenyl)tetrathiaisophlorin ( 11 ) with dimethyldioxirane afforded the oxidized product, which was the tetrathiaisophlorin with two thiophene 1‐oxide moieties ( 12 ). More significant nonplanarity and greater bond length alternation in 12 than those of 11 were observed by X‐ray structural analysis. The absorption spectrum of 12 contains two bands at λ=348 and 276 nm, with a weak tail that extends to λ≈650 nm. Analysis of the magnetic circular dichroism spectrum of 12 , based on Michl's 4N‐perimeter model and molecular orbital calculations, indicate that the broad band at λ=348 nm appears to contain N₂ and P₂ bands, and 12 is classified as a 4nπ system, similar to 11 . The nuclear‐independent chemical shift values and ¹H NMR spectroscopy data indicate that 12 has more antiaromatic character than 11 .     

Multimetal‐Substituted Epsilon‐Iron Oxide ϵ‐Ga0.31Ti0.05Co0.05Fe1.59O3 for Next‐Generation Magnetic Recording Tape in the Big‐Data Era

From the viewpoints of large capacity, long‐term guarantee, and low cost, interest in magnetic recording tapes has undergone a revival as an archive storage media for big data. Herein, we prepared a new series of metal‐substituted ?‐Fe₂O₃, ?‐Ga^III_0.31Ti^IV_0.05Co^II_0.05Fe^III_1.59O₃, nanoparticles with an average size of 18 nm. Ga, Ti, and Co cations tune the magnetic properties of ?‐Fe₂O₃ to the specifications demanded for a magnetic recording tape. The coercive field was tuned to 2.7 kOe by introduction of single‐ion anisotropy on Co^II (S=3/2) along the c‐axis. The saturation magnetization was increased by 44 % with Ga^III (S=0) and Ti^IV (S=0) substitution through the enhancement of positive sublattice magnetizations. The magnetic tape media was fabricated using an actual production line and showed a very sharp signal response and a remarkably high signal‐to‐noise ratio compared to the currently used magnetic tape.     

Activity Measurements of Solid Ni–In Alloys by EMF Method with Zirconia Solid Electrolyte

The EMF of galvanic cells with stabilized zirconia solid electrolyte was measured to determine the activity of indium in solid Ni–In alloys in the temperature range of 970–1170 K and composition range of 5–55 mol% In. Activity of indium increases sharply in the ζ phase and Ni₁₃In₉ phase. The activity values are compared with literature data.     

Synthesis and asymmetric polymerization of (S)‐N‐maleoyl‐L‐leucine propargyl ester

A kind of N‐substituted maleimide (RMI), chiral (S)‐N‐maleoyl‐L ‐leucine propargyl ester ((S)‐PLMI) with a specific rotation of [α]₄₃₅ = ?27.5° was successfully synthesized from maleic anhydride, L ‐leucine, and propargyl alcohol. (S)‐PLMI was polymerized by three polymerization methods to obtain the corresponding optically active polymers. Asymmetric anionic, radical, and transition‐metal‐catalyzed polymerizations were carried out using organometal/chiral ligands, 2,2′‐azobisisobutyronitrile (AIBN) and (bicyclo [2,2,1]hepta‐2,5‐diene) chloro rhodium (I) dimer ([Rh(nbd) Cl]₂), respectively. Poly((S)‐PLMI) obtained by [Rh(nbd)Cl]₂ in DMF showed the highest specific rotation of ?280.6°. Chiroptical properties and structures of the polymers obtained were investigated by GPC, CD, IR, and NMR measurements. Two types of poly((S)‐PLMI)‐bonded‐silica gels as the chiral stationary phase (CSP) were prepared for high‐performance liquid chromatography (HPLC). Their optical resolution abilities were also elucidated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3722–3738, 2007