Activity Measurements of Solid Ni–In Alloys by EMF Method with Zirconia Solid Electrolyte

The EMF of galvanic cells with stabilized zirconia solid electrolyte was measured to determine the activity of indium in solid Ni–In alloys in the temperature range of 970–1170 K and composition range of 5–55 mol% In. Activity of indium increases sharply in the ζ phase and Ni₁₃In₉ phase. The activity values are compared with literature data.     

Synthesis and Stereochemical Revision of the C31–C67 Fragment of Amphidinol 3

Amphidinol 3 (AM3) is a marine natural product produced by the dinoflagellate Amphidinium klebsii. Although the absolute configuration of AM3 was determined in 1999 by extensive NMR analysis and degradation of the natural product, it was a daunting task because of the presence of numerous stereogenic centers on the acyclic carbon chain and the limited availability from natural sources. Thereafter, revisions of the absolute configurations at C2 and C51 were reported in 2008 and 2013, respectively. Reported herein is the revised absolute configuration of AM3: 32S, 33R, 34S, 35S, 36S, and 38S based on the chemical synthesis of partial structures corresponding to the C31–C67 fragment of AM3 in combination with degradation of the natural product. The revised structure is unique in that both antipodal tetrahydropyran counterparts exist on a single carbon chain. The structural revision of AM3 may affect proposed structures of congeners related to the amphidinols.     

Chemical and electrochemical treatment effects on the morphology,structure, and electrochemical performance of carbon fiber with different graphitization indexes

The association of capacitive charging of the double-layer and a faradic redox reaction is desirable on carbon fiber (CF) when oxygen functional groups or other heteroatoms are present on its surface enhancing its capacitive properties. In this work, a systematic study of carbon fiber produced at three different heat treatment temperatures (HTT) of 1000, 1500, and 2000 °C was performed upon two approaches: middle (chemical) and severe (electrochemical) oxidative treatments. Morphological, structural, and surface chemical changes were investigated by field emission gun-scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. Electrochemical responses were analyzed by galvanostatic charge/discharge, electrochemical impedance spectroscopy, and cyclic voltammetry. Raman results showed that the electrochemical oxidation promoted structural variation on CF samples independently of their HTT. Concerning the specific capacitance, the results indicated that chemical treatment was more effective for CF1000 than those for CF1500 and CF2000. This behavior may be attributed to higher amount of oxygen on its surface as well as its lower structural ordering. Otherwise, for CF1000, the electrochemical treatment increased its resistivity. However, for CF1500 and CF2000, which present higher graphitization levels and less heteroatom contents, greater capacitance values were observed after their electrochemical oxidative treatment.     

Preparation and properties of aromatic polymides from 2,2′-bibenzoic acid and aromatic diamines

Aromatic polyamides having inherent viscosities up to 1.8 dL/g were synthesized either by the direct polycondensation of 2,2′-bibenzoic acid with various aromatic diamines or by the low temperature solution polycondensation of 2,2′-bibenzoyl chloride with aromatic diamines. All the aromatic polyamides were amorphous and soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone, dimethyl sulfoxide, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polymides had glass transition temperatures in the range of 226-306deg;C and began to lose weight around 350°C in air.     

Synthesis of aromatic polyethers by Scholl reaction. II. On the polymerizability of 4,4′-bis(phenoxy)diphenyl sulfones and of 4,4′-bis(phenythiol)diphenyl sulfone

4,4′-Bis(phenoxy)diphenyl sulfone ( 1 ), 4,4′-bis(phenylthio)diphenyl sulfone ( 2 ), and 1 substituted with various electron-donating groups in the phenoxy units were synthesized and polymerized under oxidative reaction conditions. The presence of methyl, tert-butyl, and methoxy groups as substituents on the phenoxy groups of 1 increases both the yield and the solubility of the resulting polymers. The structure-reactivity relationship of the monomers and of the growing species were discussed based on a radical-cation mechanism of polymerization. Monomers of high nucleophilicity and resonance stabilized radical-cation growing species are crucial to achieve polymers of high molecular weight. The structure of the polymers and in several cases of their chain ends were determined by ¹H-NMR spectroscopy. The mechanism of termination and the side reactions occuring during this polymerization process were discussed based on the structure of the resulting polymers.     

Morphological change of the micelle of poly(styrene)-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) induced by binding of sodium dodecyl sulfate

Morphological change of a micelle of poly(styrene)-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) (PS-PVP-PEO) polymer was induced by binding sodium dodecyl sulfate (SDS) to the PVP block in acidic aqueous solutions. The change in the size of SDS/PS-PVP-PEO complexes was detected by dynamic light scattering measurements and atomic force microscopy, and the binding of SDS was confirmed by zeta-potential measurements. When the micelle was free from SDS in acidic aqueous solutions, the hydrodynamic diameter of the micelle was 216 nm, reflecting the extended conformation of the PVP block due to the repulsion between protonated pyridine units. As the cationic PVP block was electrically neutralized with anionic SDS, the diameter was gradually reduced concomitant with the decrease in zeta-potential and finally reached 175 nm when the PVP block was completely neutralized. The decrease in the diameter shows the morphological change of the PVP block from extended to shrunken forms. Further addition of SDS did not cause the changes of the diameter nor zeta-potential. This indicates that SDS was not bound to the PS-PVP-PEO polymer after the PVP block was fully neutralized and that the hydrophobic binding of SDS to the polymer was negligible due to the low concentration of SDS.