Highly sensitive rare cell detection based on quantum dot probe fluorescence analysis

This study presents an efficient and sensitive method for detecting rare cells without cell culture, in which cells are analyzed quantitatively using quantum dots (QDs) as a fluorescent probe. By the conjugation of QDs with cells, the biotin–streptavidin reaction functions as a bridge to connect QDs and cells. The cells can be quantified based on the correlation of the QD fluorescence intensity with the cell population. Non-specific adsorption and cross-reaction of QD625–streptavidin on T cell membrane are neglected by reacting with biotin anti-human CD3 and mixing with red blood cell, respectively. Additionally, the photo-activation period and pH can be controlled to enhance the fluorescence of cell populations, which increases linearly with the number of T cells from 40 to 100,000, not only in a single T cell line but also in mixing with a total of 10⁶ red blood cells. Moreover, the specific T cells can be detected in less than 15 min, even though rare specific cells may number only 40 cells. Among the advantages, the proposed system for detecting rare cells include simplicity of preparation, low cost, rapid detection, and high sensitivity, all of which can facilitate the detection of circulating tumor cells in early stages of diagnosis or prognosis.      

Reactive Compatibilization of Poly(trimethylene terephthalate)/Polypropylene Blends by Polypropylene‐graft‐Maleic Anhydride. Part 2. Crystallization Behavior

The crystallization behavior of uncompatibilized and reactive compatibilized poly(trimethylene terephthalate)/polypropylene (PTT/PP) blends was investigated. In both blends, PTT and PP crystallization rates were accelerated by the presence of each other, especially at low concentrations. When PP content in the uncompatibilized blends was increased to 50–60 wt%, PTT showed fractionated crystallization; a small PTT crystallization exotherm appeared at ～135°C besides the normal ～175°C exotherm. Above 70 wt% PP, PTT crystallization exotherms disappeared. In contrast, PP in the blends showed crystallization exotherms at 113–121°C for all compositions. When a maleic anhydride‐grafted PP (PP‐g‐MAH) was added as a reactive compatibilizer, the crystallization temperatures (T _c ) of PTT and PP shifted significantly to lower temperatures. The shift of PTT's T _c was larger than that of the PP, suggesting that addition of the PP‐g‐MAH had a larger effect on PTT's crystallization than on PP due to reaction between maleic anhydride and PTT.

The nonisothermal crystallization kinetics was analyzed by a modified Avrami equation. The results confirmed that PTT's and PP's crystallization was accelerated by the presence of each other and the effect varied with blend compositions. When the PP content increased from 0 to 60 wt%, PTT's Avrami exponent n decreased from 4.35 to 3.01; nucleation changed from a thermal to an athermal mode with three‐dimensional growths. In contrast, when the PTT content increased from 0 to 90 wt% in the blends, changes in PP's n values indicated that nucleation changed from a thermal (0–50 wt% PTT) to athermal (60–70 wt% PTT) mode, and then back to a thermal (80–90 wt% PTT) mode. When PP‐g‐MAH was added as a compatibilizer, the crystallization process shifted considerably to lower temperatures and it took a longer crystallization time to reach a given crystallinity compared to the uncompatibilized blends.     

Structural and Morphological Control in the Preparation of High Surface Area Zirconia

The methods for the formation of zirconia including precipitation from aqueous salts, sol–gel synthesis from zirconium alkoxides, and the templated synthesis using surfactants are described in this review. The surface areas obtained vary widely but invariably decrease upon prolonged calcination. Digestion of hydrous zirconia and incorporation of dopants such as lanthanum, yttrium, or sulfate ions can increase the surface area and thermal stability. However, these methods also affect the crystal phase of zirconia. The transformation from the metastable tetragonal to the monoclinic phase occurs during the cooling phase of calcination. Mechanisms for the stabilization of the tetragonal phase are discussed. Zirconia with well-ordered mesopores or in the form of hollow spheres can be prepared but lack thermal stability, unless doped with phosphates, silicates or sulfates.     

A Comparison of Differently Synthesized Gold‐coated Magnetic Nanoparticles as ‘Dispersible Electrodes’

Gold‐coated magnetic nanoparticles (Au@MNPs) have attracted significant interest in electrochemistry in recent years. This is especially the case with their application as dispersible electrodes where modified Au@MNPs are dispersed into a solution, selectively bind to the analyte of interest and are then brought to an electrode via application of a magnetic field for measurement. This paper characterizes four types of Au@MNPs with different sizes, shapes, and method of synthesis as dispersible electrodes. The Au@MNPs were characterized by transmission electron microscopy and X‐ray photoelectron spectroscopy and scanning electron microscopy. In addition, the electrochemical behaviour of Au@MNPs was investigated using cyclic voltammetry. The four sorts of Au@MNPs were evaluated with regards to the three main features required in the dispersible electrodes approach, well‐defined morphology, well‐defined electrochemistry and fast response to a magnetic field. The Cubic‐Au@MNPs, which presents the simplest synthetic route, showed the best electrochemical stability and performance, responding quickly to a magnet and had a well defined shape.     

CeOx doping on a TiO2-SiO2 supporter enhances Ag based adsorptive desulfurization for diesel

In this work, the impact of CeO_x doping on a TiO₂-SiO₂ supporter on the Ag based adsorptive desulfurization for Chinese standard diesel was studied. The dispersion and valence states of Ce, Ti and Ag species were characterized, and the impact of Ce doping was investigated. The results indicated that Ce species and Ti species were dispersed evenly on the surface of SiO₂ via a novel co-impregnation method. Following CeO_x doping, the Ag species were in the form of oxides (about 5nm) instead of metallic Ag particles (about 35nm), which is due to the large amount of coordinative unsaturated sites provided by the interaction between CeO_x and TiO₂, as well as the oxidation-reduction property of CeO_x. The Ag in the active oxide state (Ag₂O₂) and dispersed evenly on the supporter could interact with sulfur compounds more favorably, and therefore showed a good performance in the adsorptive desulfurization. In both static batch and dynamic breakthrough desulfurization tests, Ag-CeO_x/TiO₂-SiO₂ was proved to be a more efficient adsorbent compared with Ag-TiO₂-SiO₂. It was found that the desulfurization performance of Ag-TiO₂-SiO₂ exhibited an excellent improvement (22.5%) after being doped with CeO_x. In the static equilibrium tests, the equilibrium sulfur capacity of Ag-CeO_x/TiO₂-SiO₂ was up to 5.38mg/g for CN-II diesel (sulfur content 952.9mg/kg) and the sulfur content of the CN-IV diesel (sulfur content 39.0mg/kg) after desulfurization was less than 10mg/kg, which could meet the CN-V standard.     

Role of interfacial water on protein adsorption at cross-linked polyethylene oxide interfaces

Sum frequency generation (SFG) vibrational spectroscopy was used to study the structure of water at cross-linked PEO film interfaces in the presence of human serum albumin (HSA) protein. Although PEO is charge neutral, the PEO film/water interface exhibited an SFG signal of water similar to that of a highly charged water/silica interface, signifying the presence of ordered water. Ordered water molecules were observed not only at the water/PEO interface, but also within the PEO film. It indicates that the PEO and water form an ordered hydrogen-bonded network extending from the bulk PEO film into liquid water, which can provide an energy barrier for protein adsorption. Upon exposure to the protein solution, the SFG spectra of water at the water/PEO interface remained nearly unperturbed. For comparison, the SFG spectra of water/silica and water/polystyrene interfaces were also studied with and without HSA in the solution. The SFG spectra of the interfacial water were correlated with the amount of protein adsorbed on the surfaces using fluorescence microscopy, which showed that the amount of protein adsorbed on the PEO film was about 10 times less than that on a polystyrene film and 3 times less than that on silica.     

Accurate dispensing of volatile reagents on demand for chemical reactions in EWOD chips

Digital microfluidic chips provide a new platform for manipulating chemicals for multi-step chemical synthesis or assays at the microscale. The organic solvents and reagents needed for these applications are often volatile, sensitive to contamination, and wetting, i.e. have contact angles of <90° even on the highly hydrophobic surfaces (e.g., Teflon? or Cytop?) typically used on digital microfluidic chips. Furthermore, often the applications dictate that the processes are performed in a gas environment, not allowing the use of a filler liquid (e.g., oil). These properties pose challenges for delivering controlled volumes of liquid to the chip. An automated, simple, accurate and reliable method of delivering reagents from sealed, off-chip reservoirs is presented here. This platform overcomes the issues of evaporative losses of volatile solvents, cross-contamination, and flooding of the chip by combining a syringe pump, a simple on-chip liquid detector and a robust interface design. The impedance-based liquid detection requires only minimal added hardware to provide a feedback signal to ensure accurate volumes of volatile solvents are introduced to the chip, independent of time delays between dispensing operations. On-demand dispensing of multiple droplets of acetonitrile, a frequently used but difficult to handle solvent due to its wetting properties and volatility, was demonstrated and used to synthesize the positron emission tomography (PET) probe [(18)F]FDG reliably.     

Preparation of uniformly sized alginate microspheres using the novel combined methods of microchannel emulsification and external gelation

The purpose of this study was to prepare alginate (ALG) microspheres with narrow size distribution using a combination of microchannel (MC) emulsification technique and external gelation method. ALG solution was dispersed as water-in-oil (W/O) emulsion droplets in iso-octane containing 5 wt% Span 85 as the immiscible continuous phase via MC emulsification technique using hydrophobic MC array. The MC array used in this experiment is a grooved-type MC consisting of 1070 channels fabricated on a 25 mm × 28 mm silicon microchip. The monodisperse W/O emulsion droplets generated from the MCs were in the mean particle diameter (d_av) range of 18–22 μm and coefficient of variation (CV) of 5–26% at the ALG concentrations of 0.5–3.0 wt% and flow rates of 0.05–0.4 mL/h. The d_av of the emulsion droplets hardly changed below a dispersed phase threshold flow rate of 0.2 mL/h but gradually became smaller when the dispersed phase concentration was increased. The resulting emulsion droplets were then congealed to form rigid ALG gel particles by reacting them with calcium chloride (CaCl₂) solution. Gelation of the ALG droplets by calcium ion (Ca²⁺) resulted in shrinkage of its d_av, forming uniformly sized ALG microspheres with an average diameter of 6.2 μm and a CV of below 10% at the ALG concentration of 3 wt%.     

Kaehler structures on

Let be a compact connected semi-simple Lie group, let , and let be an Iwasawa decomposition. To a given -invariant Kaehler structure on , there corresponds a pre-quantum line bundle on . Following a suggestion of A.S. Schwarz, in a joint paper with V. Guillemin, we studied its holomorphic sections as a -representation space. We defined a -invariant -structure on , and let denote the space of square-integrable holomorphic sections. Then is a unitary -representation space, but not all unitary irreducible -representations occur as subrepresentations of . This paper serves as a continuation of that work, by generalizing the space considered. Let be a Borel subgroup containing , with commutator subgroup . Instead of working with , we consider , for all parabolic subgroups containing . We carry out a similar construction, and recover in the unitary irreducible -representations previously missing. As a result, we use these holomorphic sections to construct a model for : a unitary -representation in which every irreducible -representation occurs with multiplicity one.