Hydrothermal Synthesis and Structure of a New 3D Lanthanide—Carboxylate Framework,[La（btec）1／2（H2btec）1／2（H2O）]n（H4btec=1,2,4,5—Benzeneteracarboxylic acid）

The title complex, [La(btec)_1/2(H₂btec)_1/2 (H₂O)]_n (H₄btec= 1, 2,4,5‐benzenetetracarboxylic acid) (1) was synthesized by the hydrothermal reaction of 1,2,4,5‐benzenetetracarboxylic dianhydride with La(NO₃)₃·6H₂O in H₂O, and crystallizes in the triclinic system, space group P‐1 with a = 0.64403(3) nm, b = 0.94500(4) nm, c = 0.96380(5) nm, a = 88.535(2)°, β = 100.314(2)°, γ = 76.6470(10)°, V = 1.60968(10) nm³, Z = 2, and final R = 0.0274, R_w = 0.0735. In 1, each La(m) ion is coordinated by eight oxygen atoms from six carboxylate groups and one coordinated water molecule. Two different coordination modes of H₄btec were present in the structure, one of which contains two protonated carboxylate groups to balance the charge.     

A High－efficiency Preparation, Properties and Structure of （R, S ）－and （ S, S）－Pyrrolidine－2－carboxylic Acid 3,5－Dioxa－4－boracvclo.hepta [ 2,1－α; 3,4－α′] dinaphthalen－4－yl Esters

A highly-efficient preparative procedure for ( R, S )- and ( S, S)-pyrroHdine-2-carboxyHc acid 3,5-dioxa-4-boracyclohepta[2, 1-α ; 3,4-α′] dlnaphthalen-4-yl esters [ namely ( R, S )-BNBAP and (S, S )-BNBAP] is described and the crystal structure of (R, S )-BNBAP was obtained. The data indicate that ( R, S )-BNBAP is a spirocyclic inner borate salt with almost normal te-trahedral configuration. This structural form may be the basic reason for their high chemical, optical and thermodynamic sta-bility.     

Extrudate swell behavior of PS and LLDPE melts in a dual die with mixed circular/slit flow channels in an extrusion rheometer

Extrudate swell behaviors of polystyrene (PS) and linear low‐density polyethylene (LLDPE) melts in a dual channel die, having mixed circular/slit flow channels, in a constant shear rate rheometer were examined. The extrudate swell ratio for PS melt was observed to be higher than that for LLDPE melt for all cases, this being associated with the differences in molecular structures that could be described in terms of power law indexes and secondary flows near the die entrance. In single channel die, the extrudate swell of both PS and LLDPE melts in circular flow channel die was greater than that in slit flow channel, whereas, in dual channel die the slit channel exhibited a higher extrudate swell ratio, the results being explained by revealing the flow patterns of the melt in the barrel and die of the rheometer. It was found that the dimensionless size of the vortex flows near the entrance, and the extent of disentanglement of molecular chains on entering the die were the important factors for the differences in the extrudate swell ratios of the melts at the die exit influenced by the die designs used. Copyright © 2003 John Wiley & Sons, Ltd.     

Selective Transport of Alkali—Metal Cations through Liquid Membranes by Non—Cyclic Carriers

The emission spectra of a series of naphthalene end-labeled oligo-oxyethylene(N-Pn-N) and their facilitated transport of cations across liquid membranes have been investigated.Alkali-metal cations enhance or inhibit the intramolecular excimer formation of N-Pn-N remarkably,suggesting that the polyether chain of N-Pn-N in solution complexes with the cations,and the orientation of the terminal chromophores depends on the cation size and the length of the polyether chain. These compounds are able to act as carriers to facilitate transport of alkali-metal cations through organic liquid membranes.The transport efficiencies are comparable with those of cyclic carriers such as crown ethers,and show remarkable selectivity.     

苯并菲盘状液晶的合成、亲氟效应及分子对称性对介晶性的影响

New symmetrical and asymmetrical triphenylene-containing discotic liquid crystals with two different peripheral alkyl chains, known as sym-TP(OC6H13)3(OR)3 and asym-TP(OC6H13)3(OR)3, were synthesized. Their thermotropic liquid crystal properties were investigated through polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analyses. The asyrranetdcal discogens are 2,6,11-rialkoxy-3,7,10-trihexyloxytriphenylenes, with the alkyl chain carbon numbers varying from 3-10, 12, and 14, while the symmetrical compounds are 2,6,10-trialkyloxy-3,7,11-trihexyloxytriphenylene. Two fluoroalkoxy substituted triphenylene discogens, 2,6,10-td(4,4,4-trifluorobutoxy)-3,7,11-trihexyloxytriphenylene and its asymmetrical isomer 2,6,11-tri(4,4,4-trifluorobutoxy)-3,7,10-trihexyloxytdphenylene were prepared. These two compounds show higher melting and clearing points than their alkoxy analogs, which implies that fluorophilic effect exists in the formation and stabilization of discotic columnar mesophase. The triphenylene derivatives TP(OC6H13)3(OR)3 with two different peripheral chains, symmetrically or asymmetrically attached on triphenylene cores, have lower melting points and clearing points than those of the higher symmetrical compounds TP(OR)6 with the same total chain carbon numbers. The mixed-chain-triphenylenes with longer alkoxy chains (n=9,10,12,14) show columnarmesophase at room temperature.     

Development of miniaturized multi-channel high-performance liquid chromatography for high-throughput analysis

We have developed miniaturized multi-channel high-performance liquid chromatography (HPLC) system. With this system, we can simultaneously separate multiple samples, using a single high-pressure gradient pump, a chip-based sample injection unit, a monolithic silica capillary column array, and a multi-channel UV detection unit based on fiber optics. The injection unit has a simplified structure composed of brass housing and a quartz microchip having microchannels and access ports, which enable a direct injection of sample to multi-channel by commercial multichannel micropipette. Moreover, that possesses a function of microvalve, and on-chip definition of sample injection plugs achieved with a cross channel injection method, providing each column of monolithic silica capillary array. The substances in channels were simultaneously detected with UV having multiple cells. Standard samples were analyzed for characterizing newly developed system, and sharp peaks were obtained with reproducibility data of < 0.9% (R.S.D.). Analysis of tryptic digestion of casein was also employed. These results show that the novel multi-channel HPLC system has the benefits for the high-throughput analysis in the post-genomic analysis/combinatorial chemistry.     

Design and Synthesis of 3‐Aryl‐5‐Alicylic‐[1,2,4]‐oxadiazoles as Novel Platelet Aggregation Inhibitors

A series of 4‐[2‐(alicyclic‐[1,2,4]oxadiazol‐3‐yl)phenoxy]‐butyric acids were synthesized from N‐hydroxy‐2‐isopropoxy benzamidine in 4 steps with good yields. These [1,2,4]oxadiazoles are novel platelet aggregation inhibitors preventing human platelet aggregation induced by thromboxane derivative U44,619 and adenosine diphosphate. A structure‐activity‐relationship study revealed that the potency for these 5‐oxadiazoles increases with the increase in the ring size of the alicylic rings. Derivative 8f may be useful as a template for the design of more potent anti‐platelet agents.     

Distribution and dynamics of radionuclides and stable elements in the coastal waters off Rokkasho Village, Japan, prior to the opening of a nuclear reprocessing facility

A nuclear fuel reprocessing facility is currently under construction in Rokkasho Village, Aomori, Japan. After completion and start-up, this facility will discharge radionuclides into the Pacific Ocean through an outlet pipe set on the seafloor offshore. For future assessments of the stability of these radionuclides in the environment, a sufficient understanding of the behavior of radionuclides in this ocean ecosystem before the start-up of the facility is necessary. To understand the processes by which radionuclides and various other types of elements are eliminated from seawater, we measured the sedimentation flux of suspended particles in the coastal waters off Rokkasho Village where the sea emissions pipes will be placed. This revised version was published online in August 2006 with corrections to the Cover Date.     

The Structure of Bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium in the Solid State and in Solution

The complex, bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium, Pd[(S)‐APCS]₂, 1 , was prepared by reaction of 2‐[(1S)‐(+)‐10‐camphorsulfonamino]‐6‐aminopyridine with PdCl₂ in THF. Complex 1 has been characterized by spectroscopic methods and its structure has been determined by X‐ray crystallography. Crystal data: space group C2, a= 16.082 (2), b = 17.104 (2), c = 13.051 (2)Å, β = 99.95 (1)°, V = 3535.9 (8) ų, Z = 2 with final residuals R1 = 0.0491 and wR2 = 0.0944. Two independent molecules, (S,S)‐Pd[(S)‐APCS]2, 1a , and (R,R)‐Pd[(S)‐APCS]2, 1b , were found in each asymmetric unit, which exchange to each other via a series of nitrogen inversion and C‐C bond rotation. The inversion energy (ΔGc₁^≠) and the energy barrier (δGc₂^≠) were 11.5 ± 0.1 Kcal mol^?1 at 246 K and 9.8 ± 0.1 Kcal mol^?1 at 199 K, respectively, calculated by dynamic NMR data.     

Synthesis of New Spiropyrans With a Polyaromatic or Heteroaromatic Pendant and Their Photochromic Bedhaviors

A series of spiropyrans with a polyaromatic or heteroaromatic pendant was synthesized conveniently.Their photochromic behaviors were investigated with the aid of absorption spectral measurements.The results indicated that the compounds with the same parent spiropyran but different aromatic pendant show significantly different photochromic properties.This may be due to the π-π orbital interaction between the polyaromatic pendant and the open photomerocyanine form of spiropyran.The results obtained are very useful in the molecule design area.