Online monitoring of coffee roasting by proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS): towards a real-time process control for a consistent roast profile

A real-time automated process control tool for coffee roasting is presented to consistently and accurately achieve a targeted roast degree. It is based on the online monitoring of volatile organic compounds (VOC) in the off-gas of a drum roaster by proton transfer reaction time-of-flight mass spectrometry at a high time (1 Hz) and mass resolution (5,500 m/Δm at full width at half-maximum) and high sensitivity (better than parts per billion by volume). Forty-two roasting experiments were performed with the drum roaster being operated either on a low, medium or high hot-air inlet temperature (= energy input) and the coffee (Arabica from Antigua, Guatemala) being roasted to low, medium or dark roast degrees. A principal component analysis (PCA) discriminated, for each one of the three hot-air inlet temperatures, the roast degree with a resolution of better than ±1 Colorette. The 3D space of the three first principal components was defined based on 23 mass spectral profiles of VOCs and their roast degree at the end point of roasting. This provided a very detailed picture of the evolution of the roasting process and allowed establishment of a predictive model that projects the online-monitored VOC profile of the roaster off-gas in real time onto the PCA space defined by the calibration process and, ultimately, to control the coffee roasting process so as to achieve a target roast degree and a consistent roasting.     

Solvent effect on intensities of hypersensitive bands of lanthanide perchlorates

The measurements of oscillator strengths of hypersensitive bands for Ln(ClO₄)₃ (Ln  Nd, Ho, Er) in different solvents are reported. The sesults are discussed within the framework of the polarizability mechanism.     

A host-guest complex between a metal-organic cyclotriveratrylene analog and a polyoxometalate: [Cu6(4,7-phenanthroline)8(MeCN)4]2PM12O40(M = Mo or W)

The synthesis and crystal structure of Cu(6)(4,7-phenanthroline)(8)(MeCN)(4)(6+) a novel Cu(i)-molecular hexamer is described in which the metal cations and phenanthroline molecules self-assemble into a dimer of shallow triangular-shaped bowls, within which are located large spherical polyoxometalate anions PM(12)O(40)(3-)(M = Mo or W).     

Effect of normal variations on disease classification of Raman spectra from cervical tissue

In this paper, we examine how variations in normal tissue can influence disease classification of Raman spectra. Raman spectra from normal areas may be affected by previous disease or proximity to areas of dysplasia. Spectra were acquired in vivo from 172 patients and classified into five tissue categories: true normal (no history of disease), previous disease normal (history of disease, current normal diagnosis), adjacent normal (disease on cervix, spectra acquired from visually normal area), low grade, and high grade. Taking into account the various "normal" states of the tissue before statistical analysis led to a disease classification accuracy of 97%. These results indicate that abnormal changes significantly affect Raman spectra, even when areas are histopathologically normal. The sensitivity of Raman spectroscopy to subtle biochemical differences must be considered in order to successfully implement it in a clinical setting for diagnosing cervical dysplasia and cancer.     

A structure-based design approach to advance the allyltyrosine-based series of HIV integrase inhibitors

As of mid-2017, only one structure of the human immunodeficiency virus (HIV) integrase core domain co-crystallised with an active site inhibitor was reported. In this structure (1QS4), integrase is complexed with a diketo-acid based strand-transfer inhibitor (INSTI). This structure has been a preferred platform for the structure-based design of INSTIs despite concerns relating to structural irregularities arising from crystallographic packing effects. A survey of the current pool of 297 reported integrase catalytic core structures indicated that the anatomy of the active site in the complex structure 1QS4 exhibits subtle variations relative to all other structures examined. Consequently, the 1QS4 structure was employed for docking studies. From the docking of twenty-seven allyltyrosine analogues, a 3-point inhibitor binding motif required for activity was established and successfully utilised in the development of a tripeptide displaying an EC₅₀ value of 10 ± 5 μM in HIV infected human T-cells. Additional docking of “in-house” compound libraries unearthed a methyl ester based nitrile derivative displaying an IC₅₀ value of 0.5 μM in a combined 3′-processing and strand-transfer assay.     

Tuning the hydrophobicity of mica surfaces by hyperthermal Ar ion irradiation

The hydrophobicity of surfaces has a strong influence on their interactions with biomolecules such as proteins. Therefore, for in vitro studies of bio-surface interactions model surfaces with tailored hydrophobicity are of utmost importance. Here, we present a method for tuning the hydrophobicity of atomically flat mica surfaces by hyperthermal Ar ion irradiation. Due to the sub-100 eV energies, only negligible roughening of the surface is observed at low ion fluences and also the chemical composition of the mica crystal remains almost undisturbed. However, the ion irradiation induces the preferential removal of the outermost layer of K(+) ions from the surface, leading to the exposure of the underlying aluminosilicate sheets which feature a large number of centers for C adsorption. The irradiated surface thus exhibits an enhanced chemical reactivity toward hydrocarbons, resulting in the adsorption of a thin hydrocarbon film from the environment. Aging these surfaces under ambient conditions leads to a continuous increase of their contact angle until a fully hydrophobic surface with a contact angle >80° is obtained after a period of about 3 months. This method thus enables the fabrication of ultrasmooth biological model surfaces with precisely tailored hydrophobicity.     

Investigation of the fold-surface problem in polyethylene single crystals with the nitric acid oxidation technique

Single-crystal preparations of polyethylene were treated with the selective oxidizing agent, fuming nitric acid. The degraded products were examined as regards layer thickness (by low-angle x-ray studies), chemical and weight changes, recrystallization and annealing treatments, and by broadline NMR, as part of a systematic investigation aimed at clarifying the nature of disordered material in single crystals. It emerges that there is a disordered-mobile region along the fold surface of the crystals in agreement with other parallel works along similar lines. In a more detailed analysis we can now decompose the nitric acid attack into components affecting the basal and side surfaces, respectively. Taking into account the recrystallization–annealing observations, we infer that the fold surface is heterogeneous with folds of more than one kind. These results were combined with a preliminary molecular weight distribution study by gel permeation chromatography. Taking into account all the available evidence, we are led to suggest a composite structure where surface looseness, coresponding to long loops and hairs, is superimposed on the more regular folded surface. This model is in the process of being tested. The problems concerning the assignment of a value to the amount of surface looseness are being discussed. In addition, a discontinuity in the thermal behavior of the crystals between 75 and 80°C. has been detected.     

Austauscher mit cyclischen Polyethern als Ankergruppen—I: Herstellung und Charakterisierung

Numerous exchangers with cyclic polyethers as anchor groups have been prepared and their properties examined. 4-Carboxyethyl- and 4-hydroxypropylbenzo crown ethers were fixed to silica gel and used as stationary phases in high-pressure liquid-chromatography.     

Excited-state electron-transfer quenching by a series of water photoreduction mediators

Rate constants k_q for the quenching of the excited state of Ru(bipy)₃²⁺ by a series of viologen salts having different redox potential E_{$\text{1}\text{2}$} have been determined in deaerated aqueous solutions at pH = 5 by laser flash photolysis. The k_q values are found to decrease with increasing —E_{$\text{1}\text{2}$} and to correlate with the reaction free-energy change ΔG. Such a correlation is shown to be consistent with the Rehm—Weller model for electron-transfer reactions.     

Theory of measurement of gas-adsorption equilibria by rotational oscillations

The gas adsorbed on the inner surface of a highly porous material like activated carbon or zeolite can be measured by slow damped oscillations of a torsional pendulum. The physical principles and the theory of this method are outlined. Formulas are given relating the increase in mass due to adsorption to changes of the frequency and the logarithmic decrement of slow, damped rotational oscillations of the pendulum. Preliminary measurements of gas adsorption equilibria of nitrogen on activated carbon show that the ratio of the mass adsorbedm, to the mass of the adsorbentm ^s , can be determined by this method with mean absolute error |m/m ^s |0.04%.Dedicated to the memory of Joseph Kestin (1913–1993).