On the theory of electron correlation in atoms and molecules. II. General cluster expansion theory and the general correlated wave functions method

An exact cluster expansion of many electron wave functions is derived, beginning with a finite linear combination of Slater determinants rather than the more usual single determinant. This general cluster expansion is found to apply both in the case where all possible Slater determinants from a finite set of spin orbitals are included in the linear combination, and in the case where the number of determinants is restricted. The special properties of that finite linear combination of determinants closest to the exact wave function in the least squares sense are studied. These properties lead to the derivation of a general correlated wave functions method, illustrating again the close relationship between methods of this type and cluster expansion theory. Additional approximations, necessary for practical calculations, are set out.     

Absolute rate constants for some hydrogen atom abstraction reactions by a primary fluoroalkyl radical in water

A combination of laser flash photolysis and competitive kinetic methods have been used to measure the absolute bimolecular rate constants for hydrogen atom abstraction in water from a variety of organic substrates including alcohols, ethers, and carboxylic acids by the perfluoroalkyl radical, *CF(2)CF(2)OCF(2)CF(2)SO(3)(-) Na(+). Comparison, where possible, of these rate constants with those previously measured for analogous reactions in the non-polar organic solvent, 1,3-bis(trifluoromethyl)benzene (J. Am. Chem. Soc, 1999, 121, 7335) show that the alcohols react 2-5 times more rapidly in the water solvent and that the ethers react at the same rate in both solvents. A transition state for hydrogen abstraction that is more reminiscent of an "intimate ion pair" than a "solvent separated ion pair" is invoked to explain these modest solvent effects.     

Quantum chemical studies on electrophilic addition

The geometries of the 2-chloroethyl and ethylenechloronium cations, two possible intermediates in the electrophilic addition of chlorine to ethylene, have been fully optimized using ab initio molecular orbital calculations employing the split valence shell 4-31G basis set.These geometries were then used to compute more accurate wave functions using Dunning's double-zeta basis set. The bridged chloronium ion was found to be more stable by 9.35 kcal/mole, the opposite order of stability from the C₂H₄F⁺ ions. Interconversion of the two C₂H₄Cl⁺ cations was computed to have a barrier of 6.25 kcal/mole.The activation energy for this chlorination reaction, using the ethylenechloronium cation and a chlorine anion at infinite separation as the model for the activated complex, was computed to be 128.7 kcal/mole, showing that this is not a feasible gas phase reaction.     

Reactions of 29 Transition Metal Cations, in the Same Oxidation State and under the Same Gas-Phase Conditions, with Sulfur

A total of 29 transition metals (all except Tc), all as ions M(+), have been reacted with gaseous S(8). The reactivities and reaction products provide a unique set of comparative data on a fundamental reaction of the elements. The results underlie the interpretation of many other processes and compounds in condensed phases. Series of product ions [MS(y)()](+) are formed, with y generally starting at 4, and increasing with time through 8 up to 10, 12, 16, or 21 (for La(+)). A general mechanism is proposed, in which the first {MS(8)}(+) encounter complex is reactive and undergoes S-S bond scission and rearrangement around the metal, such that [MS(8)](+) is not an early product. The early transition metals react faster than later members of the series, and third row metals react about twice as fast as first row metals. The metals which are more chalcophilic in condensed-phase chemistry are apparently less so as M(+); Hg(+) does not form observable [HgS(y)()](+) (except for a very low yield of [HgS(3)](+)) and is remarkably less reactive with sulfur than most of the other metal ions. Simple electron transfer between M(+) and S(8) does not occur except possibly for Ir(+), but S(8)(+) is sometimes observed and is believed to be formed by electron transfer from S(8) to some [MS(y)()](+) complexes. Interpretation of the rates of reaction of the ions of groups 3, 4, and 5 with S(8) is complicated because they react with adventitious water in the cell forming oxo-species. The results are discussed in the context of condensed-phase metal polysulfide chemistry.     

Novel selectfluor and deoxo-fluor-mediated rearrangements. New 5(6)-methyl and phenyl methanopyrrolidine alcohols and fluorides

Stereoselective syntheses of novel 5,6-difunctionalized-2-azabicyclo[2.1.1]hexanes containing 5-anti-fluoro or hydroxyl in one methano bridge and a variety of syn- or anti-chloro, fluoro, hydroxy, methyl, or phenyl substituents in the other methano bridge have been effected. Rearrangements of iodides to alcohols were initiated using Selectfluor. Rearrangement of alcohols to fluorides was initiated using Deoxo-Fluor. Ring opening of 2-azabicyclo[2.2.0]hex-5-ene exo-epoxide with organocopper reagents is regioselective at C(5).     

Stabilization of carbon dioxide-in-water emulsions with silica nanoparticles

Stable carbon dioxide-in-water emulsions were formed with silica nanoparticles adsorbed at the interface. The emulsion stability and droplet size were characterized with optical microscopy, turbidimetry, and measurements of creaming rates. The increase in the emulsion stability as the silica particle hydrophilicity was decreased from 100% SiOH to 76% SiOH is described in terms of the contact angles and the resulting energies of attachment for the silica particles at the water-CO(2) interface. The emulsion stability also increased with an increase in the particle concentration, CO(2) density, and shear rate. The dominant destabilization mechanism was creaming, whereas flocculation, coalescence, and Ostwald ripening played only a minor role over the CO(2) densities investigated. The ability to stabilize these emulsions with solid particles at CO(2) densities as low as 0.739 g/mL is particularly relevant in practical applications, given the difficulty in stabilizing these emulsions with surfactants, because of the unusually weak solvation of the surfactant tails by CO(2).     

Direct titrations of antibiotics with iodate solutions: Part 2. Some selected cephalosporins

A previous method for the determination of penicillins by direct titration with potassium iodate under strongly acidic conditions has been extended to the assay of some selected cephalosporins. Results are presented, including error and precision analyses, for the determination of cephaloridine, cephalothin and cephalexin. The appropriate stoichiometries are 1 mol cephalosporin to 3 mol iodate for cephalothin and cephaloridine; 1 mol to 2 mol iodate for cephalexin. An irreversible aqueous end-point technique has been compared with the chloroform layer method; the latter gives more precise results for the determination of cephaloridine and cephalothin (0.8% and 1.3% r.s.d. respectively). Comparable precision was obtained by either technique for the determination of cephalexin (1.39% r.s.d.).     

Determination by X-ray absorption spectroscopy of the Fe-Fe separation in the oxidized form of the hydroxylase of methane monooxygenase alone and in the presence of MMOD

The diiron active site in the hydroxylase of Methylococcus capsulatus (Bath) methane monooxygenase (MMOH) has been studied in the oxidized form by X-ray absorption spectroscopy (XAS). Previous investigations by XAS and X-ray crystallography have identified two different distances (3.0 and 3.4 angstroms) between the two Fe atoms in the dinuclear site. The present study has employed a systematic extended X-ray absorption fine structure (EXAFS) fitting methodology, utilizing known and simulated active site and relevant model structures, to determine unambiguously the Fe-Fe separation in the oxidized form of MMOH. Consistent and unique fits were only possible for an Fe-Fe distance of 3.0 angstroms. This methodology was then applied to study potential changes in the active site local structure in the presence of MMOD, a protein of unknown function in multicomponent MMO. Fe K-edge and EXAFS analyses revealed negligible changes in the diiron site electronic and geometric structure upon addition of MMOD to oxidized MMOH.     

Donor-stabilized cations and imine transfer from N-silylphosphoranimines

A series of donor-stabilized N-silylphosphoranimine salts [DMAP.PCl2=NSiMe3]+X- (DMAP = 4-(dimethylamino)pyridine) were prepared by the reaction of Cl3P=NSiMe3 with DMAP in the presence of silver salts AgX (X = OSO2CF3, BF4, and SbF6). Repeating the reaction in the absence of AgX gave the chloride salt [DMAP.PCl2=NSiMe3]Cl which has been shown to be in equilibrium with free DMAP and Cl3P=NSiMe3. Attempts to stabilize a N-silylphosphoranimine cation with phosphine donors led to unexpected imine transfer chemistry. For example, Cl3P=NSiMe3 reacts with phosphines, R3P (R = nBu and Ph), to produce the metathesis products PCl3 and R3P=NSiMe3 which subsequently react together to afford the N-phosphinophosphoranimines R3P=N-PCl2 and ClSiMe3 as a byproduct.     

Detection of chlorinated quinones using interdigitated electrodes coupled with capillary electrophoresis

An array of eight interdigitated microband gold electrodes (IDEs) has been developed together with electrophoretic separation for analysis of chlorinated hydroquinones (ClHQs) and benzoquinones (ClBQs). The IDE chip positioned very close to the separation capillary outlet served as an amplification/detection system without the requirement for frequent "capillary-electrode" alignment. ClHQs, electrophoretically migrating to the IDE surface, were oxidized at +1.1 V by seven electrodes of the array and then detected by the remaining electrode, poised at -0.1 V. Conversely, ClBQs were detected at +1.1 V by the detecting electrode after having been reduced at the 7 adjacent electrodes poised at -0.1 V. There was an amplification effect on both the detecting electrode as well as the adjacent electrodes because of the recycle between ClHQs and ClBQs. The detecting "amplification" current response was dependent on the potentials applied, the position of the detecting electrode on the array, the number of adjacent electrodes being used for recycling and the distance between the oxidative and reductive electrodes. Micellar electrokinetic chromatography (MEKC) separation of the analytes was achieved using 30 mM sodium dodecyl sulfate (SDS) with a detection limit in the range of 2-20 micro M. In addition to a facile "capillary-electrode" alignment, the important aspect described here was the capability of detecting through recycling a reduced compound (in the case of ClHQs) at a negative potential to circumvent fouling and electroactive interferences. An appealing feature was also the concurrent oxidation/reduction detection for each compound to ascertain peak assignment, as interfering compounds are less likely to exhibit the same oxidative/reductive characteristics and electrophoretic mobilities as the target analytes.