Metal Cyanide Ions Mx(CN)y]+,- in the gas phase: M = Fe,Co, Ni,Zn, Cd,Hg, Fe + Ag,Co + Ag

The generation of metal cyanide ions in the gas phase by laser ablation of M(CN)(2) (M = Co, Ni, Zn, Cd, Hg), Fe(III)[Fe(III)(CN)(6)] x xH(2)O, Ag(3)[M(CN)(6)] (M = Fe, Co), and Ag(2)[Fe(CN)(5)(NO)] has been investigated using Fourier transform ion cyclotron resonance mass spectrometry. Irradiation of Zn(CN)(2) and Cd(CN)(2) produced extensive series of anions, [Zn(n)(CN)(2n+1)](-) (1 < or = n < or = 27) and [Cd(n)(CN)(2n+1)](-) (n = 1, 2, 8-27, and possibly 29, 30). Cations Hg(CN)(+) and [Hg(2)(CN)(x)](+) (x = 1-3), and anions [Hg(CN)(x)](-) (x = 2, 3), are produced from Hg(CN)(2). Irradiation of Fe(III)[Fe(III)(CN)(6)] x xH(2)O gives the anions [Fe(CN)(2)](-), [Fe(CN)(3)](-), [Fe(2)(CN)(3)](-), [Fe(2)(CN)(4)](-), and [Fe(2)(CN)(5)](-). When Ag(3)[Fe(CN)(6)] is ablated, [AgFe(CN)(4)](-) and [Ag(2)Fe(CN)(5)](-) are observed together with homoleptic anions of Fe and Ag. The additional heterometallic complexes [AgFe(2)(CN)(6)](-), [AgFe(3)(CN)(8)](-), [Ag(2)Fe(2)(CN)(7)](-), and [Ag(3)Fe(CN)(6)](-) are observed on ablation of Ag(2)[Fe(CN)(5)(NO)]. Homoleptic anions [Co(n)(CN)(n+1)](-) (n = 1-3), [Co(n)(CN)(n+2)](-) (n = 1-3), [Co(2)(CN)(4)](-), and [Co(3)(CN)(5)](-) are formed when anhydrous Co(CN)(2) is the target. Ablation of Ag(3)[Co(CN)(6)] yields cations [Ag(n)(CN)(n-1)](+) (n = 1-4) and [Ag(n)Co(CN)(n)](+) (n = 1, 2) and anions [Ag(n)(CN)(n+1)](-) (n = 1-3), [Co(n)(CN)(n-1)](-) (n = 1, 2), [Ag(n)Co(CN)(n+2)](-) (n = 1, 2), and [Ag(n)Co(CN)(n+3)](-) (n = 0-2). The Ni(I) species [Ni(n)(CN)(n-1)](+) (n = 1-4) and [Ni(n)(CN)(n+1)](-) (n = 1-3) are produced when anhydrous Ni(CN)(2) is irradiated. In all cases, CN(-) and polyatomic carbon nitride ions C(x)N(y)(-) are formed concurrently. On the basis of density functional calculations, probable structures are proposed for most of the newly observed species. General structural features are low coordination numbers, regular trigonal coordination stereochemistry for d(10) metals but distorted trigonal stereochemistry for transition metals, the occurrence of M-CN-M and M(-CN-)(2)M bridges, addition of AgCN to terminal CN ligands, and the occurrence of high spin ground states for linear [M(n)(CN)(n+1)](-) complexes of Co and Ni.     

Functionalized platinum(II) terpyridyl alkynyl complexes as colorimetric and luminescence pH sensors

A series of platinum(II) terpyridyl alkynyl complexes that have been derivatized with basic amino functionalities, [Pt(tpy)(C[triple bond]C-C6H4-NR2-4]X (X = OTf-, R = CH3 1, R = CH2CH2OCH3 2, R = H 3; X = Cl-, R = CH3 4, R = CH2CH2OCH3 5, R = H 6) (tpy = 2,2':6',2' '-terpyridine), have been synthesized and characterized. Their photophysical responses at various acid concentrations were studied. The abilities of the complexes to function as colorimetric and luminescence pH sensors were demonstrated with dramatic color changes and luminescence enhancement upon introduction of acid.     

Quantum chemical studies on electrophilic addition

The geometries of the 2-aminoethyl cation and the isomeric protonated aziridine have been optimized using ab initio molecular orbital calculations employing the split-valence shell 4-31G basis set. The protonated aziridine is computed to be the more stable ion by 46.5 kcal/mole (4-31G level) and 44.9 kcal/mole (double-zeta basis set). The profile to interconversion is found to have a barrier of less than 15 kcal/mole (relative to the 2-aminoethyl cation) and this profile is compared with those computed for the similar ions XCH₂CH ₂ ⁺ where X=OH, F, SH and Cl.     

Unexpected conversion of a polycyclic thiophene to a macrocyclic anhydride

Oxygenation of 2,5,9,12-tetra(tert-butyl)diacenaphtho[1,2-b:1′,2′-d]-thiophene (1, C₄₀H₄₄S) by peracids gave the cyclic sulfonic ester 4 (2,7,10,13-tetra(tert-butyl)diacenaphtho[1,2-c:1′,2′-e]oxathiin 5,5-dioxide, C₄₀H₄₄O₃S) which, when heated in nitrobenzene, is converted into a complex, macrocyclic anhydride 3 (C₈₀H₈₈O₃), which is derived from two molecules of 4. Further investigation found a likely intermediate in this reaction, 4,4′,7,7′-tetra(tert-butyl)-1,1′-biacenaphthylenylidene-2,2′-dione (5, C₄₀H₄₄O₂), apparently formed from 4 by additional oxidation. Anhydride 3 plausibly arises by Diels-Alder reaction of 4 and 5 followed by several ring fragmentations. The structures of 3, 4, and 5 were unambiguously established by X-ray crystallography.     

Quantum yield of the iodide-iodate chemical actinometer: dependence on wavelength and concentrations

The quantum yield (QY) of the iodide-iodate chemical actinometer (0.6 M KI-0.1 M KIO3) was determined for irradiation between 214 and 330 nm. The photoproduct, triiodide, was determined from the increase in absorbance at 352 nm, which together with a concomitant measurement of the UV fluence enabled the QY to be calculated. The QY at 254 nm was determined to be 0.73 +/- 0.02 when calibration was carried out against a National Institute of Standards and Technology traceable radiometer or photometric device. At wavelengths below 254 nm the QY increased slightly, leveling off at -0.80 +/- 0.05, whereas above 254 nm the QY decreases linearly with wavelength, reaching a value of 0.30 at 284 nm. In addition, the QY was measured at different iodide concentrations. There is a slight decrease in QY going from 0.6 to 0.15 M KI, whereas below 0.15 M KI the QY drops off sharply, decreasing to 0.23 by 0.006 M KI. Calibration of the QY was also done using potassium ferrioxalate actinometry to measure the irradiance. These results showed a 20% reduction in QY between 240 and 280 nm as compared with radiometry. This discrepancy suggests that the QY of the ferrioxalate actinometer in this region of the spectrum needs reexamination.     

On the theory of electron correlation in atoms and molecules. II. General cluster expansion theory and the general correlated wave functions method

An exact cluster expansion of many electron wave functions is derived, beginning with a finite linear combination of Slater determinants rather than the more usual single determinant. This general cluster expansion is found to apply both in the case where all possible Slater determinants from a finite set of spin orbitals are included in the linear combination, and in the case where the number of determinants is restricted. The special properties of that finite linear combination of determinants closest to the exact wave function in the least squares sense are studied. These properties lead to the derivation of a general correlated wave functions method, illustrating again the close relationship between methods of this type and cluster expansion theory. Additional approximations, necessary for practical calculations, are set out.     

Absolute rate constants for some hydrogen atom abstraction reactions by a primary fluoroalkyl radical in water

A combination of laser flash photolysis and competitive kinetic methods have been used to measure the absolute bimolecular rate constants for hydrogen atom abstraction in water from a variety of organic substrates including alcohols, ethers, and carboxylic acids by the perfluoroalkyl radical, *CF(2)CF(2)OCF(2)CF(2)SO(3)(-) Na(+). Comparison, where possible, of these rate constants with those previously measured for analogous reactions in the non-polar organic solvent, 1,3-bis(trifluoromethyl)benzene (J. Am. Chem. Soc, 1999, 121, 7335) show that the alcohols react 2-5 times more rapidly in the water solvent and that the ethers react at the same rate in both solvents. A transition state for hydrogen abstraction that is more reminiscent of an "intimate ion pair" than a "solvent separated ion pair" is invoked to explain these modest solvent effects.     

Synthesis, structure, and properties of Cs(4)Th(4)P(4)Se(26): a quaternary thorium selenophosphate containing the (P(2)Se(9))(6-) anion

Orange crystals of Cs(4)Th(4)P(4)Se(26) were grown from the reaction of (232)Th and P in a Cs(2)Se(3)/Se molten salt flux at 750 degrees C. Cs(4)Th(4)P(4)Se(26) crystallizes in the orthorhombic space group Pbca with the unit cell parameters: a = 12.0130(6), b = 14.5747(7), c = 27.134(1) A; Z = 8. The compound exhibits a three-dimensional structure, consisting of dimeric [Th(2)Se(13)] polyhedral units. The two crystallographically independent, nine-coordinate, bicapped trigonal prismatic thorium atoms share a triangular face to form the dimer, and each dimer edge-shares two selenium atoms with two other dimers to form kinked chains along the [010] direction. While this structure shares features of the previously reported Rb(4)U(4)P(4)Se(26), including phosphorus in the 5+ oxidation state, careful inspection of the structure reveals that the selenophosphate anion that knits the structure together in three directions in both compounds is a unique (P(2)Se(9))(6-) anion. The formula may be described best as [Cs(2)Th(2)(P(2)Se(9))(Se(2))(2)](2). The (P(2)Se(9))(6-) anion features a nearly linear Se-Se-Se backbone with an angle of 171 degrees and Se-Se distances that are approximately 0.2-0.3 A longer than the typical single Se-Se bond. Magnetic studies confirm that this phase contains Th(IV). Raman data for this compound is reported, and structural comparisons will be drawn to its uranium analogue, Rb(4)U(4)P(4)Se(26).     

Perfluorinated para-element imido derivatives

The comparative reaction chemistry between first and second derivative paraelement analogs ( (CF₃)₂PH, (CF₃S)₂PH, CF₃SH, CF₃SSH, CF₃SNH₂, (CF₃S)₂NH, (CF₃S) ₃N) and F-N-isopropylacetimidoyl chloride [CF₃CCl=NCF(CF₃)₂, I] has been investigated. Reaction schemes are presented. The reactions of I with NH₃ and NaI are also reported. Analytical data is provided for previously unreported compounds along with more detailed analysis of known compounds.