Atomic ensemble and electronic effects in Ag-rich AgPd nanoalloy catalysts for oxygen reduction in alkaline media

The ability to design and characterize uniform, bimetallic alloy nanoparticles, where the less active metal enhances the activity of the more active metal, would be of broad interest in catalysis. Herein, we demonstrate that simultaneous reduction of Ag and Pd precursors provides uniform, Ag-rich AgPd alloy nanoparticles (~5 nm) with high activities for the oxygen reduction reaction (ORR) in alkaline media. The particles are crystalline and uniformly alloyed, as shown by X-ray diffraction and probe corrected scanning transmission electron microscopy. The ORR mass activity per total metal was 60% higher for the AgPd(2) alloy relative to pure Pd. The mass activities were 2.7 and 3.2 times higher for Ag(9)Pd (340 mA/mg(metal)) and Ag(4)Pd (598 mA/mg(metal)), respectively, than those expected for a linear combination of mass activities of Ag (60 mA/mg(Ag)) and Pd (799 mA/mg(Pd)) particles, based on rotating disk voltammetry. Moreover, these synergy factors reached 5-fold on a Pd mass basis. For silver-rich alloys (Ag(≥4)Pd), the particle surface is shown to contain single Pd atoms surrounded by Ag from cyclic voltammetry and CO stripping measurements. This morphology is favorable for the high activity through a combination of modified electronic structure, as shown by XPS, and ensemble effects, which facilitate the steps of oxygen bond breaking and desorption for the ORR. This concept of tuning the heteroatomic interactions on the surface of small nanoparticles with low concentrations of precious metals for high synergy in catalytic activity may be expected to be applicable to a wide variety of nanoalloys.     

Early experiences in establishing a regional quantitative imaging network for PET/CT clinical trials

The Seattle Cancer Care Alliance (SCCA) is a Pacific Northwest regional network that enables patients from community cancer centers to participate in multicenter oncology clinical trials where patients can receive some trial-related procedures at their local center. Results of positron emission tomography (PET) scans performed at community cancer centers are not currently used in SCCA Network trials since clinical trials customarily accept results from only trial-accredited PET imaging centers located at academic and large hospitals. Oncologists would prefer the option of using standard clinical PET scans from Network sites in multicenter clinical trials to increase accrual of patients for whom additional travel requirements for imaging are a barrier to recruitment. In an effort to increase accrual of rural and other underserved populations to Network trials, researchers and clinicians at the University of Washington, SCCA and its Network are assessing the feasibility of using PET scans from all Network sites in their oncology clinical trials. A feasibility study is required because the reproducibility of multicenter PET measurements ranges from approximately 3% to 40% at national academic centers. Early experiences from both national and local PET phantom imaging trials are discussed, and next steps are proposed for including patient PET scans from the emerging regional quantitative imaging network in clinical trials. There are feasible methods to determine and characterize PET quantitation errors and improve data quality by either prospective scanner calibration or retrospective post hoc corrections. These methods should be developed and implemented in multicenter clinical trials employing quantitative PET imaging of patients.     

Calculation of effective material parameters by field averaging over lattices with non-negligible unit cell size

The Pendry et?al. field averaging method for calculation of effective material parameters is reviewed and its limits explored. The method is then extended so that it can accurately calculate the effective material parameters of lattices where the unit cell size is appreciable but still quasistatic (d??0.1?? ₀). The new algorithm is verified by calculating the effective material properties of periodically placed particles suspended in free space, as the unit cell size becomes appreciable. Results of our proposed formulation are then compared with the Pendry et?al. and conventional volumetric averaging algorithms.     

Carbon optically transparent electrodes for electrogenerated chemiluminescence

This study investigates pyrolyzed photoresist film (PPF)-based carbon optically transparent electrodes (C-OTEs) for use in electrogenerated chemiluminescence (ECL) studies. Oxidative-reductive ECL is obtained with a well-characterized ECL system, C8S3 J-aggregates with 2-(dibutylamino)ethanol (DBAE) as coreactant. Simultaneous cyclic voltammograms (CVs) and ECL transients are obtained for three thicknesses of PPFs and compared to nontransparent glassy carbon (GC) and the conventional transparent electrode indium tin oxide (ITO) in both front face and transmission electrode cell geometries. Despite positive potential shifts in oxidation and ECL peaks, attributed to the internal resistance of the PPFs that result from their nanoscale thickness, the PPFs display similar ECL activity to GC, including the low oxidation potential (LOP) observed for amine coreactants on hydrophobic electrodes. Reductive-oxidative ECL was obtained using the well-studied ECL luminophore Ru(bpy)(3)(2+), where the C-OTEs outperformed ITO because of electrochemical instability of ITO at very negative potentials. The C-OTEs are promising electrodes for ECL applications because they yield higher ECL than ITO in both oxidative-reductive and reductive-oxidative ECL modes, are more stable in alkaline solutions, display a wide potential window of stability, and have tunable transparency for more efficient detection of ECL.     

The reversibility of dissimilatory sulphate reduction and the cell-internal multi-step reduction of sulphite to sulphide: insights from the oxygen isotope composition of sulphate

Dissimilatory sulphate reduction (DSR) leads to an overprint of the oxygen isotope composition of sulphate by the oxygen isotope composition of water. This overprint is assumed to occur via cell-internally formed sulphuroxy intermediates in the sulphate reduction pathway. Unlike sulphate, the sulphuroxy intermediates can readily exchange oxygen isotopes with water. Subsequent to the oxygen isotope exchange, these intermediates, e.g. sulphite, are re-oxidised by reversible enzymatic reactions to sulphate, thereby incorporating the oxygen used for the re-oxidation of the sulphur intermediates. Consequently, the rate and expression of DSR-mediated oxygen isotope exchange between sulphate and water depend not only on the oxygen isotope exchange between sulphuroxy intermediates and water, but also on cell-internal forward and backward reactions. The latter are the very same processes that control the extent of sulphur isotope fractionation expressed by DSR. Recently, the measurement of multiple sulphur isotope fractionation has successfully been applied to obtain information on the reversibility of individual enzymatically catalysed steps in DSR. Similarly, the oxygen isotope signature of sulphate has the potential to reveal complementary information on the reversibility of DSR. The aim of this work is to assess this potential. We derived a mathematical model that links sulphur and oxygen isotope effects by DSR, assuming that oxygen isotope effects observed in the oxygen isotopic composition of ambient sulphate are controlled by the oxygen isotope exchange between sulphite and water and the successive cell-internal oxidation of sulphite back to sulphate. Our model predicts rapid DSR-mediated oxygen isotope exchange for cases where the sulphur isotope fractionation is large and slow exchange for cases where the sulphur isotope fractionation is small. Our model also demonstrates that different DSR-mediated oxygen isotope equilibrium values are observed, depending on the importance of oxygen isotope exchange between sulphite and water relative to the re-oxidation of sulphite. Comparison of model results to experimental data further leads to the conclusion that sulphur isotope fractionation in the reduction of sulphite to sulphide is not a single-step process.     

Atom-scale ptychographic electron diffractive imaging of boron nitride cones

Ptychographic coherent diffractive imaging (CDI) has been extensively applied using both x rays and electrons. The extension to atomic resolution has been elusive. This Letter demonstrates ptychographic electron diffractive imaging at atomic resolution, permitting identification of structure in a boron nitride helical cone at a resolution of order 1 ?, beyond that of comparative Z-contrast images. A scanning transmission electron microscope is used to create a diverging illumination in a defocused Fresnel CDI geometry, providing a robust strategy leading to a unique solution.     

Demonstration of a 100 Hz repetition rate gain-saturated diode-pumped table-top soft x-ray laser

We demonstrate the operation of a gain-saturated table-top soft x-ray laser at 100?Hz repetition rate. The laser generates an average power of 0.15?mW at λ=18.9 nm, the highest laser power reported to date from a sub-20-nm wavelength compact source. Picosecond laser pulses of 1.5?μJ energy were produced at λ=18.9 nm by amplification in a Mo plasma created by tailoring the temporal intensity profile of single pump pulses with 1?J energy produced by a diode-pumped chirped pulse amplification Yb:YAG laser. Lasing was also obtained in the 13.9?nm line of Ni-like Ag. These results increase by an order of magnitude the repetition rate of plasma-based soft x-ray lasers opening the path to milliwatt average power table-top lasers at sub-20?nm wavelengths.     

Chemical composition, antimicrobial, antiradical and anticholinesterase activity of the essential oil of Pulicaria stephanocarpa from Soqotra

The chemical composition of the hydrodistilled leaf essential oil from Pulicaria stephanocarpa Balf. Fil was determined by GC-MS analysis, and its antimicrobial, antioxidant and anticholinesterase (AChE) activities were evaluated. Eighty-three compounds were identified representing 97.2% of the total oil. (E)-Caryophyllene 13.4%, (E)-nerolidol 8.5%, caryophyllene oxide 8.5%, alpha-cadinol 8.2% spathulenol 6.8% and tau-cadinol 4.7%, were the main components. Antimicrobial activity of the oil, evaluated using the disc diffusion and broth dilution methods, demonstrated the highest susceptibility on Gram-positive bacteria and Candida albicans. The free radical scavenging ability of the oil was assessed by the DPPH assay to show antiradical activity with IC50 of 330 microg/mL. Moreover, the oil revealed an AChE inhibitory activity of 47% at a concentration of 200 microg/mL using Ellman's method.     

Metalorganic vapor phase epitaxy and characterizations of nearly-lattice-matched AlInN alloys on GaN/sapphire templates and free-standing GaN substrates

The epitaxy optimization studies of high-quality n-type AlInN alloys with different indium contents grown on two types of substrates by metalorganic vapor phase epitaxy (MOVPE) were carried out. The effect of growth pressure and V/III molar ratio on growth rate, indium content, and surface morphology of these MOVPE-grown AlInN thin films were examined. The surface morphologies of the samples were characterized by scanning electron microscopy and atomic force microscopy. By varying the growth temperatures from 860 °C to 750 °C, the indium contents in AlInN alloys were increased from 0.37% up to 21.4% as determined by X-ray diffraction (XRD) measurements. The optimization studies on the growth conditions for achieving nearly-lattice-matched AlInN on GaN templates residing on sapphire and free-standing GaN substrates were performed, and the results were analyzed in a comparative way. Several applications of AlInN alloy for thermoelectric and light-emitting diodes are also discussed.