Solid-state optical properties of a chiral supramolecular fluorophore consisting of chiral (1R,2R)-1,2-diphenylethylenediamine and fluorescent carboxylic acid derivatives

By using (1R,2R)-1,2-diphenylethylenediamine as a chiral molecule and 2-anthracenecarboxylic acid as a fluorescent molecule, we created a chiral supramolecular organic fluorophore having circularly polarized luminescence properties in the solid-state.     

Different reaction modes for the oxidative dimerization of epoxyquinols and epoxyquinones. Importance of intermolecular hydrogen-bonding

An oxidative dimerization reaction, involving the three successive steps of oxidation, 6 pi-electrocyclization, and Diels-Alder reaction, has been experimentally and theoretically investigated for the three 2-alkenyl-3-hydroxymethyl-2-cyclohexen-1-one derivatives epoxyquinol 3, epoxyquinone 6, and cyclohexenone 10. Of the sixteen possible modes of the oxidation/6 pi-electrocylization/Diels-Alder reaction cascade for the epoxyquinone 6, and eight for the cyclohexenone 10, only the endo-anti(epoxide)-anti(Me)-hetero and endo-anti(Me)-hetero modes are, respectively, observed, while both endo-anti(epoxide)-anti(Me)-hetero and exo-anti(epoxide)-anti(Me)-homo reaction modes occur with the epoxyquinol 3. Intermolecular hydrogen-bonding is found to be the key cause of formation of both epoxyquinols A and B with 3, although epoxyquinone 6 and cyclohexenone 10 both gave selectively only the epoxyquinol A-type product. In the dimerization of epoxyquinol 3, two monomer 2H-pyrans 5 interact with each other to afford intermediate complex 28 or 29 stabilized by hydrogen-bonding, from which Diels-Alder reaction proceeds. Theoretical calculations have also revealed the differences in the reaction profiles of epoxyquinone 6 and cyclohexenone 10. Namely, the rate-determining step of the former is the Diels-Alder reaction, while that of the latter is the 6 pi-electrocyclization.     

Determination of vanillin and related flavor compounds in cocoa drink by capillary electrophoresis

In the first part of this study, the stability of five terpenes (alpha-pinene, limonene, camphor, citronellol, and carvacrol) under subcritical water conditions was investigated. The stability studies were carried out at four different temperatures (100, 150, 200, and 250 degrees C) with two different heating times (30 and 300 min). When water temperature was increased, the degradation of terpenes became more serious. Prolonged exposure time to each heating temperature also caused decreased terpene stability. The terpene recoveries were determined by conducting subcritical water extraction of sand spiked with terpenes. The recoveries are typically around 70 to 80% for extractions at 100 degrees C. Terpene recoveries were decreased with increasing water temperature due to poorer stability of terpenes. After the degradation and recovery studies, basil and oregano leaves were extracted using water at both 100 and 150 degrees C. The concentrations of each individual terpene in the water extract generally ranged from trace quantity to 65 microg terpene/g herb. However, the concentration of carvacrol in the oregano-water extract at 150 degrees C was found to be as high as 4270 microg carvacrol/g oregano.     

New determination methods of halides and cyanide ions by electrospray ionization mass spectrometry based on ternary complex formation

Determination methods of halide ions (X(-) = F(-), Cl(-), Br(-) and I(-)) by electrospray ionization mass spectrometry (ESIMS) were developed, where negative ions of the ternary complexes of group-13 elements, nitrilotriacetic acid (NTA), and halides were measured. In particular, these halides were simultaneously determined by measuring [InX(nta)](-), and the limits of detection (LODs) were 1.1 μmol dm(-3) for F(-), 0.32 μmol dm(-3) for Cl(-), 3.8 nmol dm(-3) for Br(-), and 1.6 nmol dm(-3) for I(-), respectively. This approach was extended to the determination of CN(-), where the ternary complex of Cu(II), CN(-) and 4-(2-pyridylazo)resorcinol (PAR), i.e., [(63)Cu(II)(CN)(par)](-) (m/z 302) was measured. The LOD for CN(-) was 20 nmol dm(-3).     

X-ray absorption, photoemission spectroscopy, and Raman scattering analysis of amorphous tantalum oxide with a large extent of oxygen nonstoichiometry

The electronic structure and modification of the local interatomic structure of a reactive sputtered amorphous tantalum oxide (a-TaO(x)) thin film with the variation of oxygen nonstoichiometry, x in a-TaO(x) have been investigated by X-ray absorption spectroscopy (XAS), X-ray photoemission spectroscopy (XPS), Raman scattering spectroscopy, and Rutherford back scattering spectroscopy. A parallel chemical shift of Ta4f(7/2) and O1s core levels observed with the variation of x indicates the Fermi level shift by reduction and oxidation in the framework of the rigid band model. Extended X-ray absorption fine structure (EXAFS) suggests both the increase of average coordination number of the first Ta-O shell in polyhedra and a considerable reduction of the average Ta-O bond length with the increase of x. The relative intensity of Raman shift peaks at 670 cm(-1) and 815 cm(-1), corresponding to Ta-O stretching of TaO(6) octahedra and TaO(5) probably with a pyramidal form, respectively, drastically changes between x = 2.47 to 1.86, suggesting the change in the predominant polyhedron from TaO(6) to TaO(5) with a modification in multiplicity of oxygen by the reorganization of the polyhedral network.     

Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells

Anion conductive aromatic multiblock copolymers, poly(arylene ether)s containing quaternized ammonio-substituted fluorene groups, were synthesized via block copolycondensation of fluorene-containing (later hydrophilic) oligomers and linear hydrophobic oligomers, chloromethylation, quaternization, and ion-exchange reactions. The ammonio groups were selectively introduced onto the fluorene-containing units. The quaternized multiblock copolymers (QPEs) produced ductile, transparent membranes. A well-controlled multiblock structure was responsible for the developed hydrophobic/hydrophilic phase separation and interconnected ion transporting pathway, as confirmed by scanning transmission electron microscopic (STEM) observation. The ionomer membranes showed considerably higher hydroxide ion conductivities, up to 144 mS/cm at 80 °C, than those of existing anion conductive ionomer membranes. The durabilities of the QPE membranes were evaluated under severe, accelerated-aging conditions, and minor degradation was recognized by (1)H NMR spectra. The QPE membrane retained high conductivity in hot water at 80 °C for 5000 h. A noble metal-free direct hydrazine fuel cell was operated with the QPE membrane at 80 °C. The maximum power density, 297 mW/cm(2), was achieved at a current density of 826 mA/cm(2).     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

Optically transparent superhydrophobic TEOS-derived silica films by surface silylation method

Optically transparent silica films were prepared at room temperature (~27°C) by keeping the molar ratio of TEOS:MeOH:H₂O (0.001 M NH₄F) constant at 1:19.29:6.20, respectively. A surface chemical modification of the films was done with alkylchlorosilanes at different concentrations from 0 to 1 vol. % and aging times varied from half to 2 h. The DMCS and TMCS surface modified silica films showed the static water contact angle of 146° and 162°, respectively. When the DMCS and TMCS modified films were cured at temperatures higher than 240 and 275°C, respectively, the films became superhydrophilic. Further, the humidity study was carried out at a relative humidity of 90% at 30°C temperature over 60 days. We characterized the water repellent silica films by Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, % of optical transmission, humidity tests and contact angle measurements.     

Catalytic activity and regeneration property of a Pd nanoparticle encapsulated in a hollow porous carbon sphere for aerobic alcohol oxidation

A core-shell composite consisting of a palladium (Pd) nanoparticle and a hollow carbon shell (Pd@hmC) was employed as a catalyst for aerobic oxidation of various alcohols. The core-shell structure was synthesized by consecutive coatings of Pd nanoparticles with siliceous and carbon layers followed by removal of the intermediate siliceous layer. Structural characterizations using TEM and N(2) adsorption-desorption measurements revealed that Pd@hmC thus-obtained was composed of a Pd nanoparticle core of 3-6 nm in diameter and a hollow carbon shell with well-developed mesopore (ca. 2.5 nm in diameter) and micropore (ca. 0.4-0.8 nm in diameter) systems. When compared to some Pd-supported carbons, Pd@hmC showed a high level of catalytic activity for oxidation of benzyl alcohol into benzaldehyde using atmospheric pressure of O(2) as an oxidant. The Pd@hmC composite also exhibited a high level of catalytic activity for aerobic oxidations of other primary benzylic and allylic alcohols into corresponding aldehydes. The presence of a well-developed pore system in the lateral carbon shell enabled efficient diffusion of both substrates and products to reach the central Pd nanoparticles, leading to such high catalytic activities. This core-shell structure also provided high thermal stability of Pd nanoparticles toward coalescence and/or aggregation due to the physical isolation of each Pd nanoparticle from neighboring particles by the carbon shell: this specific property of Pd@hmC resulted in possible regeneration of catalytic activity for these aerobic oxidations by a high-temperature heat treatment of the sample recovered after catalytic reactions.     

Semiconducting behavior of type-I Si clathrate K8Ga8Si38

A ternary type-I Si clathrate K(8)Ga(8)Si(38) has been revealed to be an indirect band gap semiconducting material with an energy gap (E(g)) of approximately 0.10 eV, which is much smaller than the calculated E(g) value that is 0.15 eV wider than E(g) of elemental Si with the diamond-type structure.