Intermolecular Halogen Bond Detected in Racemic and Optically Pure N-C Axially Chiral 3-(2-Halophenyl)quinazoline-4-thione Derivatives

The halogen bond has been widely used as an important supramolecular tool in various research areas. However, there are relatively few studies on halogen bonding related to molecular chirality. 3-(2-Halophenyl)quinazoline-4-thione derivatives have stable atropisomeric structures due to the rotational restriction around an N-C single bond. In X-ray single crystal structures of the racemic and optically pure N-C axially chiral quinazoline-4-thiones, we found that different types of intermolecular halogen bonds (C=S⋯X) are formed. That is, in the racemic crystals, the intermolecular halogen bond between the ortho-halogen atom and sulfur atom was found to be oriented in a periplanar conformation toward the thiocarbonyl plane, leading to a syndiotactic zig-zag array. On the other hand, the halogen bond in the enantiomerically pure crystals was oriented orthogonally toward the thiocarbonyl plane, resulting in the formation of a homochiral dimer. These results indicate that the corresponding racemic and optically pure forms in chiral molecules are expected to display different halogen bonding properties, respectively, and should be separately studied as different chemical entities.     

Isolation of new quinidine metabolites and simultaneous determination of quinidine and its metabolites in blood and urine by direct injection HPLC analysis

Summary New quinidine metabolites, including 10,11-dihydrodiol quinidine N-oxide, 10,11-dihydrodiol quinidine and their glucuronides, were found in human urine. A quinidine monitoring HPLC method including these metabolites, is proposed by the direct injection of body fluid samples onto the precolumn for deproteinization followed by reverse phase separation in the analytical column with a column switching technique. The recovery of spiked quinidine and its metabolites in plasma was quantitative (98–102%) with good reproducibility (C.V.: 1.6–4.0%). Several clinical samples such as whole blood and urine were analyzed by the present method.     

Adsorption of anionic chloro complexes of 59Fe and 195Au on non-ionic resins of macro-reticular type

Adsorption behavior of 59Fe and 195Au on the non-ionic macro-reticular resin, Amberlite XAD-7 is studied. Distribution coefficients (Kd) for both nuclides in hydrochloric acid or lithium chloride solutions above 6M are particularly high. In nitric acid solution below 2M, 195Au is highly adsorbed on the resin but 59Fe is negligible over any concentrations. This resin did not adsorb other important radionuclides such as 54Mn, 60Co, 65Zn, 90Sr, 106Ru, 137Cs and 144Ce at all. Based on such peculiar adsorption behavior, application to selective separation and determination of radio and stable iron in sea water was also studied.     

Further studies on the reaction of amines and proteins with 4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole

The reaction of glycine with NBD-F (4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole) is investigated to establish conditions that provide a high formation rate of NBD-glycine and a low hydrolysis rate of the reagent. The reaction rate increases with higher temperature, larger contents of organic solvent and a sodium borate buffer. The use of borate buffer decreases ther ate of hydrolysis of the reagent. For low-molecular-weight amines, condition for a suitable liquid chromatographic postcolumn reactor include a high content of acetonitrile and 0.1 M sodium borate (pH 8.0–8.5). For proteins, separated by molecular-exclusion chromatography, water is needed for sensitive reactions. Suitable postcolumn reactor conditions include borate buffer (pH 7.9) containing 0.1 M potassium chloride, a 0.02% (w/v) NBD-F solution in acetonitrile with reaction at 50°C for about 45 s. The detection limits for human serum albumin, β-lactoglobulin and myoglobin are 6.6 pmol, 8.4 pmol and 11 pmol, respectively.     

Structural and conformational studies on citreoviridinol and isocitreoviridinol: syntheses of some 2,6-dioxabicyclo[3.2.1]octanes

Isocitreoviridinol has been newly isolated from the mycelium of $\text{Penicillium citreo-viride}$ B. (IFO 6050) together with citreoviridinol, and their stereostructures have also been elucidated by means of chemical method: the 2,6-dioxabicyclo[3.2.1]octanes have been made, one of which is regarded as a promising synthetic intermediate of citreoviridinol. In addition, isocitreoviridinol diacetate has been derived from citreoviridin in 3 steps.     

Development of hydrophilic fluorogenic derivatization reagents for thiols: 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole

Sensitive, reactive, and hydrophilic fluorogenic reagents for thiols with the benzofurazan skeleton, 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (AcABD-F) and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (TCAcABD-F) have been developed. These reagents reacted with thiols within 10 min at 60 degrees C. AcABD-F and TCAcABD-F themselves do not fluoresce but are strongly fluorescent after the reaction with thiol compounds. The generated derivatives were highly water-soluble, since they dissociated a proton and ionized in the neutral pH region. The derivatives with four biologically important thiol compounds were separated on a reversed-phase HPLC column and detected fluorometrically at 504 nm with excitation at 388 nm. The detection limit attained for homocysteine with AcABD-F was 25 fmol on column (11 nM) (signal-to-noise ratio = 3), and that for glutathione with TCAcABD-F was 45 fmol on column (20 nM).     

Dianion of sulfinylacetone as a synthetic equivalent of beta-enolate of propionic acid: a novel synthesis of carboxylic acids from alkyl halides with three-carbon elongation

The reaction of the dianion of phenylsulfinylacetone with alkyl halides afforded beta-keto sulfoxides, which were first chlorinated with hexachloroethane and then treated successively with KH and t-BuLi to give carboxylic acids in three-steps in moderate overall yields from the alkyl halides. This procedure affords a good method for a synthesis of carboxylic acids from alkyl halides with three-carbon elongation.     

Facile Fabrication of Concentrated Polymer Brushes with Complex Patterning by Photocontrolled Organocatalyzed Living Radical Polymerization

Photocontrolled surface‐initiated reversible complexation mediated polymerization (photo‐SI‐RCMP) was successfully applied to fabricate concentrated polymer brushes with complex patterning structures. Positive‐type patterned polymer brushes were obtained by photo‐SI‐RCMP under visible light (550(±50) nm) using photomasks. A particularly interesting finding was that negative‐type patterned polymer brushes were also obtainable in a facile manner. A nonspecial UV light (250–385 nm) enabled the preparation of pre‐patterned initiator surfaces in a remarkably short time (1 min), leading to negative‐type patterned polymer brushes. Based on this unique selectivity between visible and UV light, the combination of two patterning techniques enabled the preparation of complex patterned brushes, including diblock copolymers, binary polymers, and functional binary polymers, without multistep immobilization of one or more initiators on the surfaces.     

Kinetic pathway to double-gyroid structure

We have investigated the structural development during order-order transitions to the double-gyroid (DG) phase of nonionic surfactant/water systems based on two-dimensional small-angle x-ray scattering patterns from highly oriented ordered mesophases. The lamellar (L) to DG transition proceeds through two intermediate structures, a fluctuating perforated layer structure having ABAB stacking and a hexagonal perforated lamellar structure with ABCABC stacking (HPLABC). For a hexagonally packed cylinder (H) to DG transition, we also observed the HPLABC structure as the intermediate phase, thus the HPLABC is an entrance structure for the DG phase. The hexagonal perforated lamellar (HPL) structure consists of hexagonally packed holes surrounded by the planar tripods, and the transition from HPL structure to the DG phase proceeds by rotation of the dihedral angle of connected tripods. A geometrical consideration shows that large deformations of HPL planes are necessary to form the DG structure from the HPLABC structure, whereas the transition from a HPL structure with ABAB stacking (HPLAB) to the DG structure is straightforward. In spite of the topological constraints, the HPLABC structure is observed in the kinetic pathway to the DG structure.     

Headspace Solid-Phase Microextraction/Gas Chromatography–Mass Spectrometry for the Determination of 2-Nonenal and Its Application to Body Odor Analysis

The odors and emanations released from the human body can provide important information about the health status of individuals and the presence or absence of diseases. Since these components often emanate from the body surface in very small quantities, a simple sampling and sensitive analytical method is required. In this study, we developed a non-invasive analytical method for the measurement of the body odor component 2-nonenal by headspace solid-phase microextraction coupled with gas chromatography–mass spectrometry by selective ion monitoring. Using a StableFlex PDMS/DVB fiber, 2-nonenal was efficiently extracted and enriched by fiber exposition at 50 °C for 45 min and was separated within 10 min using a DB−1 capillary column. Body odor sample was easily collected by gauze wiping. The limit of detection of 2-nonenal collected in gauze was 22 pg (S/N = 3), and the linearity was obtained in the range of 1–50 ng with a correlation coefficient of 0.991. The method successfully analyzed 2-nonenal in skin emissions and secretions and was applied to the analysis of body odor changes in various lifestyles, including the use of cosmetics, food intake, cigarette smoking, and stress load.