Focusing,collimation and flux throughput at the IMCA‐CAT bending‐magnet beamline at the Advanced Photon Source

The IMCA‐CAT bending‐magnet beamline was upgraded with a collimating mirror in order to achieve the energy resolution required to conduct high‐quality multi‐ and single‐wavelength anomalous diffraction (MAD/SAD) experiments without sacrificing beamline flux throughput. Following the upgrade, the bending‐magnet beamline achieves a flux of 8 × 10¹¹ photons s^?1 at 1 Å wavelength, at a beamline aperture of 1.5 mrad (horizontal) × 86 µrad (vertical), with energy resolution (limited mostly by the intrinsic resolution of the monochromator optics) δE/E = 1.5 × 10^?4 (at 10 kV). The beamline operates in a dynamic range of 7.5–17.5 keV and delivers to the sample focused beam of size (FWHM) 240 µm (horizontally) × 160 µm (vertically). The performance of the 17‐BM beamline optics and its deviation from ideally shaped optics is evaluated in the context of the requirements imposed by the needs of protein crystallography experiments. An assessment of flux losses is given in relation to the (geometric) properties of major beamline components.     

雾化角对液体火箭发动机燃烧室压力振荡的影响

针对液氧/煤油火箭发动机模型燃烧室实现了三维非稳态两相燃烧过程的数值模拟,得到的燃烧室截面平均压力和平均速度与实验吻合。在初边值条件不施加任何扰动的情况下,得到了燃烧室压力自激振荡过程,并研究了液氧和煤油喷嘴雾化角对燃烧室压力振荡的影响。计算结果表明:当雾化角为40°或120°时,由于燃料与氧化剂喷雾锥重叠区域较小或较大,导致了推进剂混合很差或很好,不易在燃烧室头部出现局部爆炸性的可燃混气团,致使燃烧室压力振荡强度较弱;而当雾化角为中间值65°时,易于出现爆炸性的可燃气团并导致剧烈的压力振荡,使燃烧室中出现燃烧不稳定性。因此,雾化角的合理设计是抑制燃烧不稳定性的一种途径。     

Sources of distortion product otoacoustic emissions revealed by suppression experiments and inverse fast Fourier transforms in normal ears.

Primary and secondary sources combine to produce the 2f1-f2 distortion product otoacoustic emission (DPOAE) measured in the ear canals of humans. DPOAEs were obtained in nine normal-hearing subjects using a fixed-f2 paradigm in which f1 was varied. The f2 was 2 or 4 kHz, and absolute and relative primary levels were varied. Data were obtained with and without a third tone (f3) placed 15.6 Hz below 2f1-f2. The level of f3 was varied in order to suppress the stimulus frequency otoacoustic emission (SFOAE) coming from the 2f1-f2 place. These data were converted from the complex frequency domain into an equivalent time representation using an inverse fast Fourier transform (IFFT). IFFTs of unsuppressed DPOAE data were characterized by two or more peaks. Relative amplitudes of these peaks depended on overall primary level and on primary-level differences. The suppressor eliminated later peaks, but early peaks remained relatively unaltered. Results are interpreted to mean that the DPOAE measured in humans includes components from the f2 place (intermodulation distortion) and DP place (in the form of a SFOAE). These findings build on previous work by providing evidence that multiple peaks in the IFFT are due to a secondary source at the DP place.     

Simultaneous recording of stimulus-frequency and distortion-product otoacoustic emission input-output functions in human ears

Stimulus frequency otoacoustic emission (SFOAE) input-output (I/O) functions were elicited in normal-hearing adults using unequal-frequency primaries in equal-level and fixed-suppressor level (Ls) conditions. Responses were repeatable and similar across a range of primary frequency ratios in the fixed-Ls condition. In comparison to equal-frequency primary conditions [Schairer, Fitzpatrick, and Keefe, J. Acoust. Soc. Am. 114, 944-966 (2003)], the unequal-frequency, fixed-Ls condition appears to be more useful for characterizing SFOAE response growth and relating it to basilar-membrane response growth, and for testing the ability to predict audiometric thresholds. Simultaneously recorded distortion-product OAE (DPOAE) I/O functions had higher thresholds than SFOAE I/O functions, and they identified the onset of the nonlinear-distortion mechanism in SFOAEs. DPOAE threshold often corresponded to nonmonotonicities in SFOAE I/O functions. This suggests that the level-dependent nonmonotonicities and associated phase shifts in SFOAE I/O functions were due to varying degrees of cancellation of two sources of SFOAE, such as coherent reflection and distortion mechanisms. Level-dependent noise was observed on-band (at the frequencies of the stimuli) but not off-band, or in the DPOAEs. The variability was observed in ears with normal hearing and ears with cochlear implants. In general, these results indicate the source of the variability is biological, possibly from within the middle ear.     

Synthesis,Biological Evaluation and Docking Studies of Ring-Opened Analogues of Ipomoeassin F

The plant-derived macrocyclic resin glycoside ipomoeassin F (Ipom-F) binds to Sec61α and significantly disrupts multiple aspects of Sec61-mediated protein biogenesis at the endoplasmic reticulum, ultimately leading to cell death. However, extensive assessment of Ipom-F as a molecular tool and a therapeutic lead is hampered by its limited production scale, largely caused by intramolecular assembly of the macrocyclic ring. Here, using in vitro and/or in cellula biological assays to explore the first series of ring-opened analogues for the ipomoeassins, and indeed all resin glycosides, we provide clear evidence that macrocyclic integrity is not required for the cytotoxic inhibition of Sec61-dependent protein translocation by Ipom-F. Furthermore, our modeling suggests that open-chain analogues of Ipom-F can interact with multiple sites on the Sec61α subunit, most likely located at a previously identified binding site for mycolactone and/or the so-called lateral gate. Subsequent in silico-aided design led to the discovery of the stereochemically simplified analogue 3 as a potent, alternative lead compound that could be synthesized much more efficiently than Ipom-F and will accelerate future ipomoeassin research in chemical biology and drug discovery. Our work may also inspire further exploration of ring-opened analogues of other resin glycosides.     

内蒙古地区沙生植物--沙枣中维生素C含量的测定

在 pH 6.0的 HAc-NaAc缓冲溶液中,用活性炭吸附沙枣中的色素,Cu(Ⅱ)催化氧化维生素C,在λmax=268 nm处可直接测定沙枣中维生素C含量.与传统碘量法相比,测定结果基本一致.为内蒙古地区沙枣天然植物资源的药用开发、食品加工等提供了参考数据.     

Sequence, structure, and function of peptide self-assembled monolayers

Cysteine is commonly used to attach peptides onto gold surfaces. Here we show that the inclusion of an additional linker with a length of four residues (-PPPPC) and a rigid, hydrophobic nature is a better choice for forming peptide self-assembled monolayers (SAMs) with a well-ordered structure and high surface density. We compared the structure and function of the nonfouling peptide EKEKEKE-PPPPC-Am with EKEKEKE-C-Am. Circular dichroism, attenuated total internal reflection Fourier transform IR spectroscopy, and molecular dynamics results showed that EKEKEKE-PPPPC-Am forms a secondary structure while EKEKEKE-C-Am has a random structure. Surface plasmon resonance sensor results showed that protein adsorption on EKEKEKE-PPPPC-Am/gold is very low with small variation while protein adsorption on EKEKEKE-C-Am/gold is high with large variation. X-ray photoelectron spectroscopy results showed that both peptides have strong gold-thiol binding with the gold surface, indicating that their difference in protein adsorption is due to their assembled structures. Further experimental and simulation studies were performed to show that -PPPPC is a better linker than -PC, -PPC, and -PPPC. Finally, we extended EKEKEKE-PPPPC-Am with the cell-binding sequence RGD and demonstrated control over specific versus nonspecific cell adhesion without using poly(ethylene glycol). Adding a functional peptide to the nonfouling EK sequence avoids complex chemistries that are used for its connection to synthetic materials.     

Geometrical contributions to secret sharing theory

Finite geometry has found applications in many different fields and practical environments. We consider one such application, to the theory of secret sharing, where finite projective geometry has proved to be very useful, both as a modelling tool and as a means to establish interesting results. A secret sharing scheme is a means by which some secret data can be shared among a group of entities in such a way that only certain subsets of the entities can jointly compute the secret. Secret sharing schemes are useful for information security protocols, where they can be used to jointly protect cryptographic keys or provide a means of access control. We review the contribution of finite projective geometry to secret sharing theory, highlighting results and techniques where its use has been of particular significance.