Distribution of melamine in polyester–melamine surface coatings cured under nonisothermal conditions

The influence of experimental cure parameters on the diffusion of reactive species in polyester–melamine thermoset coatings during curing has been investigated with X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared. The diffusion of melamine plays a vital role in the curing process and, therefore, in the ultimate properties of coatings. At a low (<20%) hexamethoxymethylmelamine (HMMM) crosslinker concentration, the matrix composition is uniform, but at high HMMM concentrations, excess HMMM rapidly segregates to the air–coating interface. The rate of migration is governed by the difference in the surface free energies of polyester and HMMM and the concentration gradient of HMMM between the bulk and the surface. An increased rate of energy absorption also increases the rate of migration of HMMM to the surface. A physical model has been proposed to explain this surface segregation phenomenon in terms of cocondensation and self‐condensation reactions. It suggests that an appropriate amount of melamine can be segregated on the surface and allowed to self‐condense to form a desired thickness of a melamine topcoat through the control of the binder composition and cure conditions. This technique can be implemented to apply a melamine topcoat during cure. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 83–91, 2004     

UV curing of a novel resin derived from poly(ethylene terephthalate)

The synthesis and characterization of photopolymerizable unsaturated polyester resins based on PET waste are described. The resins came from a depolymerization process based on the glycolysis of PET by diethylene glycol (DEG). Different molecular weights of glycolysates were synthesized. Then, the latter was functionalized by a methyl hemiester of maleic acid to obtain unsatured α,ω‐bismaleate PET oligomers. In the presence of an electron donor monomer, such as triethylene glycol divinyl ether, these electron acceptor oligomers were copolymerized by way of charge‐transfer complexes under UV irradiation. The reaction was monitored in situ by real‐time IR spectroscopy to study the kinetics of photopolymerization. This one was studied in relation with the physical and chemical characteristics of oligoesters and the composition of mixtures containing divinyl ethers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1324–1335, 2007     

Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007     

Measurements and simulations of particle dispersion in a turbulent flow

A particle imaging technique has been used to collect droplet displacement statistics in a round turbulent jet of air. Droplets are injected on the jet axis, and a laser sheet and position-sensitive photomultiplier tube are used to track their radial displacement and time-of-flight. Dispersion statistics can be computed which are Lagrangian or Eulerian in nature. The experiments have been simulated numerically using a second-order closure scheme for the jet and a stochastic simulation for the particle trajectories. Results are presented for non-vaporizing droplets of sizes from 35 to 160 μm. The simulations have underscored the importance of initial conditions and early droplet displacement history on the droplet trajectory for droplets with large inertia relative to the turbulence. Estimates of initial conditions have been made and their effect on dispersion is quantified.     

Serial magnetic resonance imaging in patients following acute myocardial infarction.

The detection of serial changes in magnetic resonance (MR) signal intensity of the heart following acute myocardial infarction may provide a useful method of characterizing tissue healing. Fourteen patients with acute Q-wave infarction underwent T2-weighted, spin-echo cardiac imaging during hospitalization, followed by one or more additional MR studies (total 31) over a 6- to 27-wk period (mean: 3 mo). Visual assessment of the images demonstrated a gradual reduction in signal intensity and localization of the bright signal to the subendocardium of the infarction region over the three-mo study period. A quantitative measurement of signal intensity (infarction/normal myocardium) fell from 1.81 +/- 0.42 on the initial study to 1.34 +/- 0.37 (p less than 0.05) at a mean of 14 wk. Two patients had an increase in signal intensity on the follow-up study and both patients had been readmitted with acute coronary syndromes. In summary, characterization of changes in signal intensity may provide a useful method of assessing myocardial healing following acute myocardial infarction. Further studies are indicated to determine the prognostic significance of these parameters.     

Analysis of platelet-activating factor by gas chromatography-mass spectrometry: low-energy electron impact of the corresponding 3-acetyl-2-tert.-butyldimethylsilyl derivative.

A method for the analysis of platelet-activating factor in platelets employing gas chromatography and selected-ion monitoring mass spectrometry with low-energy electron impact and stable isotope dilution was developed. The procedure involved Bligh and Dyer extraction of the sample followed by thin-layer chromatographic purification. Platelet-activating factor is successively hydrolysed to the corresponding 2-acetyl-1-O-alkylglycerol by digestion with phospholipase C, and the product is allowed to isomerize to the more thermodynamically stable 3-acetyl-1-O-alkylglycerol before column purification and derivatization of the free OH with tert.-butyldimethylchlorosaline-imidazole. This reagent is of common use in platelet-activating factor derivatization, but is made to react with 2-acetyl instead of 3-acetyl isomer. The advantages of using the latter for the final derivatization are discussed and this method is compared with others currently available for gas chromatographic-mass spectrometric analysis of platelet-activating factor.     

Electron Energy Distribution Functions in CO2 Laser Mixture: The Effects of Second Kind Collisions from Metastable Electronic States

Electron energy distribution functions (eedf) in CO₂ laser discharge (He—CO₂—N₂—CO mixture) have been calculated by solving the Boltzmann equation in the presence of given concentrations of excited (vibrational and electronic) states. The results show a well structured eedf as a result of second kind collisions coming from metastable electronic states of N₂ and He as well as a strong dependence of rate coefficients for CO₂ dissociation and for the ionization of the different species.     

Reactions of the nitrate radical with a series of reduced organic sulphur compounds in air

A 480 L evacuable reaction chamber, equipped with FT-IR spectroscopy on-line and ion chromatography off-line, has been used to study the gas phase reaction between the nitrate radical, NO₃, and the reduced organic sulphur compounds CH₃CH₂SH, (CH₃CH₂)₂S, (CH₃CH₂)₂S₂, and CH₃CH₂SCH₃ in air. The products CH₃CH₂SO₃H, SO₂, H₂SO₄, CH₃CHO, and CH₃CH₂ONO₂ were identified and quantified in the reactions of the first three compounds, CH₃CH₂SH, (CH₃CH₂)₂S, and (CH₃CH₂)₂S₂. The reaction products were CH₃CH₂SO₃H, CH₃SO₃H, SO₂, H₂SO₄, CH₃CHO, and CH₂O in the reaction of CH₃CH₂SCH₃. On the basis of identified reaction products and intermediates observed in the infrared spectra, mechanisms are proposed for the reactions between the NO₃ radical and the four reduced organic sulphur compounds. The results of this study, together with those from previous experiments performed in this laboratory on CH₃SCH₃, CH₃SH, and CH₃SSCH₃ lead to the conclusion that all these species, in the reaction with the NO₃ radical, follow a similar degradation mechanism producing SO₂, H₂SO₄, R? SO₃H, R? CHO, and R? CH₂ONO₂, as the main reaction products. The inital step of the reaction of NO₃ with R? S? R and R? S? H type (R = CH₃, CH₂CH₃) reduced organic sulphur compounds was found to be H-atom abstraction, probably after the formation of an initial adduct. For the reaction between NO₃ and R? S? S? R type compounds, evidence for an addition-decomposition reaction, as the initial steps, was obtained. R? S·, R? S(O)·, and R? S(O)₂· appear to be formed as intermediates in all the reactions. © John Wiley & Sons, Inc.     

A comment on 'Stabilization and optimal control for nonlinear systems'

This note presents a counter-example, to demonstrate that thebasis for the proposed solutions to the nonlinear quadraticregulator problem given in the paper ‘Stabilization andoptimal control for nonlinear systems’ is not true ingeneral.