Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. III. Effect of p-benzoquinone and ammonia on radiation-induced polymerization of styrene adsorbed on silica gel

In order to elucidate the mechanism of radiation-induced polymerization of styrene adsorbed on silica gel, the effect of p-benzoquinone and ammonia was investigated. The high molecular weight GPC peaks of both graft polymers and homopolymers decreased with increasing p-benzoquinone concentration, while the low molecular weight peaks of both graft copolymers and homopolymers decreased with increasing ammonia concentration. The results indicate that the high molecular weight peaks of both graft and homopolymers are formed as a result of a radical mechanism and that the low molecular weight peaks of both types of polymers are formed by a cationic mechanism. In formation of both graft polymers and homopolymers both radical and cationic polymerization take place at the same time.     

Construction and characterization of alkoxy-derived (Y,Yb)MnO<Subscript>3</Subscript>/HfO<Subscript>2</Subscript>/Si structures for FeRAM application

(Y,Yb)MnO₃ and HfO₂ films were prepared using alkoxy-derived precursor solutions, and (Y,Yb)MnO₃/HfO₂/Si structures were fabricated. The thickness, surface uniformity and crystallinity of the HfO₂ film affect the crystallization of Y_0.5Yb_0.5MnO₃ films. The degree of c-axis orientation and crystallinity of the Y_0.5Yb_0.5MnO₃ films were changed with preparation conditions of HfO₂ films. It was difficult to obtain Y_0.5Yb_0.5MnO₃ films with high crystallinity and high degree of c-axis orientation on the HfO₂ films thinner than 10 nm. The degree of c-axis orientation and crystallinity of the Y_0.5Yb_0.5MnO₃ films on HfO₂ films were improved by using diluted HfO₂ precursor solution in the case of 10 nm-thick HfO₂ film. Following this, the capacitance-voltage (C-V) characteristics were improved.     

Conversion of the carboxyl group to the corresponding trichloromethyl group in the quinoline series

Various substituted quinaldinic acids were treated with phosphorus pentachloride in an excess of thionyl chloride. Carboxyl groups of quinaldinic acid, 6-methyl-, 6-chloro-, 4-phenyl- and 4-(p-chlorophenyl)quinaldinic acids and benzo[f]quinoline-3-carboxylic acid were converted to the trichloromethyl group, while those of 8-methyl-, 4-(3,4-dichlorophenyl)-, 4-(p-nitrophenyl)-quinaldinic acids and benzo[h]quinoline-2-carboxylic acid were not. The difference is discussed on the basis of the effects of the basicity of ring nitrogen and steric factors.     

On the radiation-induced polyaddition of bisperfluoroisopropenyl terephthalate with 1,4-dioxane

Radical polyaddition of bis(α-trifluoromethyl-β,β-difluorovinyl)terephthalate [CF₂C(CF₃)OCOC₆H₄COOC(CF₃)CF₂] (BFP) with 1,4-dioxane (DOX) afforded higher molecular weight polymers under γ-rays radiation from a source when compared to those yielded by benzoyl peroxide initiation. More detailed study on the radiation-induced polyaddition of BFP with DOX and optimization of the reaction conditions were carried out. It was necessary to irradiate with doses of 2000, 1500, and 750 kGy, to obtain quantitative conversion of BFP at the feed molar ratios DOX/BFP of 8.0, 16, and 32, respectively. Step-growth polymerization mechanism was suggested by the measurements of molecular weights of the polymers obtained with several irradiation doses. It was concluded that the molecular weight of the polymer could be controlled by the feed molar ratio of DOX/BFP and irradiation doses. The steep increase of molecular weight was observed at the feed molar ratio of DOX/BFP of 8.0 with the irradiation doses above 2000 kGy and the polymer with the weight-average molecular weight of 2.36×10⁴ was obtained with the dose of 3000 kGy. The reaction between polymers might take place after the quantitative conversion of BFP. Radiation-induced radical polyaddition mechanism of BFP with DOX was proposed.     

Synthetic studies on apoptolidin: synthesis of the C12-C28 fragment via a highly stereoselective aldol reaction

The stereoselective and convergent synthesis of the C12-C28 segment 2 of the apoptosis inducing macrolide antibiotic, apoptolidin (1), is described. The synthesis involves a highly stereoselective tin(II)-mediated aldol reaction between the C17-C22 ethyl ketone 3 and the C23-C28 aldehyde 4 as the key step.     

Macrocyclic glycoclusters. Self-aggregation and phosphate-induced agglutination behaviors of calix[4]resorcarene-based quadruple-chain amphiphiles with a huge oligosaccharide pool

Macrocyclic glycocluster compounds 2n (n = 2-7) with four alkyl (undecyl) chains and eight oligosaccharide moieties on the opposite sides of the calix[4]resorcarene macrocycle are prepared from the reactions of the corresponding octaamine derivative with maltooligosaccharide lactones. Combined evidence from dynamic light scattering (DLS), gel permeation chromatography (GPC), and transmission electron microscopy (TEM) indicates that they form small micelle-like nanoparticles (d congruent with 3 nm) in water. In the presence of Na2HPO4/NaH2PO4, nanoparticles are agglutinated with phosphate ions as a glue to grow in size up to 60-100 nm, as revealed by DLS as well as microscopy (TEM and AFM). The phosphate-induced agglutination processes can be followed by surface plasmon resonance (SPR). Amphiphile 2n is readily immobilized on the hydrophobized sensor chip of SPR to give a closely packed monolayer with oligosaccharide moieties exposed to bulk water. While there is no further adsorption of 2n on the resulting monolayer, this does occur when the latter is pretreated with the phosphate salts, ultimately giving rise to a multilayer upon repeated treatment of the chip with 2n and Na2HPO4/NaH2PO4 in an alternate manner. Kinetic analyses show that the phosphate-mediated inter(saccharide) interactions in terms of rate and affinity are markedly dependent on the oligosaccharide chain lengths (n), becoming more favorable with increasing n's. The novel aggregation and agglutination behaviors observed are discussed in terms of immobilizable and irreversible micelles on the basis of the cone-shaped structure of quadruple-chain amphiphile 2n having a huge saccharide pool and the efficiency of multiple hydrogen bonding therein. The unique intermolecular binding properties of compound 22 and analogues so far reported are reviewed in light of the present finding.     

Facile syntheses of 2,2-dimethyl-6-(2-oxoalkyl)-1,3-dioxin-4-ones and the corresponding 6-substituted 4-hydroxy-2-pyrones

A variety of 2,2-dimethyl-6-(2-oxoalkyl)-1,3-dioxin-4-ones 5a-l and the corresponding 6-substituted 4-hydroxy-2-pyrones 3a-l were prepared in high yields under mild reaction conditions by the reaction of 2,2,6-trimethyl-1,3-dioxin-4-one 4 with 1-acylbenzotriazoles 9 in the presence of LDA followed by thermal cyclization of 5a-l to 3a-l. Synthesis of novel 6-(1-benzoylalkyl)-2,2-dimethyl-1,3-dioxin-4-ones 12a-c was achieved by alkylation of dioxinone 5a and their subsequent cyclization gave 5-alkyl-4-hydroxy-2-pyrones 13a-c.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. V. Effects of p-benzoquinone and dose rate on methyl methacrylate–silica gel system

In order to elucidate the mechanism of radiation-induced polymerization of methyl methacrylate adsorbed on silica gel, the effects of p-benzoquinone addition and dose rate were studied in detail. Most of the polymerization is inhibited by p-benzoquinone at levels above 10^-2 mole/l. The GPC spectra of both graft polymers and homopolymers show two peaks. The high molecular weight material appears to have been formed by polymerization by a radical mechanism, because these peaks decrease as p-benzoquinone concentration increases; on the other hand, their low molecular weight polymers seem to be products of an ionic polymerization mechanism because those peaks are almost not affected by p-benzoquinone. The four GPC peaks differ in dose rate dependences of their polymerization rate. The dose-rate exponents of polymerization rate were obtained for the four GPC peaks. The behavior of the low molecular weight peaks of graft polymers and homopolymers were quite different, suggesting that the polymers differ considerably in formation mechanism.     

Detection of two variant Vero toxin genes in Escherichia coli by capillary electrophoresis

Three methods [capillary electrophoresis (CE)-allele-specific PCR, CE-single-strand conformation polymorphism (SSCP) and CE-cleavase fragment length polymorphism (CFLP)] were developed in order to effect rapid and specific analysis of the vero toxin (VT)1 and VT2 genes of O157. The allele-specific polymerase chain reaction (PCR) method, which utilized specific duplex PCR with specific primers for VT1 and VT2, showed that VT1 and VT2 consisted of 174 and 128 bp, respectively. Subsequent CE analysis was carried out. Separation time was 4 min. SSCP, which utilized one primer set which reacted with both VT1 and VT2 in the PCR method, was followed by CE analysis of secondary structure of single-strand DNA. Two genes could be analyzed in approximately 18 min. CFLP, like SSCP, is a method for detecting mutation-induced changes in secondary structure of single-stranded DNA. The endonuclease cleavase I recognizes and cleaves the 5' side of hairpin loops in self-annealed single-strand DNA of PCR product 169 bp obtained from VT1 and VT2. The produced DNA fragments are analyzed by CE and the electrophelogram reveals a sequence-specific CFLP. Separation time was 6 min. These techniques are suitable for the detection and the identification of O157.     

Confirmation of the crystal structure of poly(p‐phenylene benzobisoxazole) by the X‐ray structure analysis of model compounds and the energy calculation

To check the previously proposed crystal structure of poly(p‐phenylene benzobisoxazole) [PBO], we performed an X‐ray structure analysis for single crystals of low molecular weight model compounds with the following chemical formulas: Both of these two model compounds show essentially the same molecular and subcell structures as those of PBO: the molecular chains take an almost perfect planar conformation and are packed together with a relative height between the adjacent chains of about 3 Å along the chain axis, although for the polymer the chains are shifted by the same value but in a disordered mode with respect to the direction of the shift (upward or downward), different from the regular packing in model compounds. These structural features are reproduced well with energy calculations. Structural ordering in PBO fibers caused by heat treatment at high temperatures, as clarified by X‐ray diffraction measurement, are interpreted on the basis of the energy calculations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1296–1311, 2001