Structural regulation of a peptide-conjugated graft copolymer: a simple model for amyloid formation

The self-assembly of peptides and proteins into beta-sheet-rich high-order structures has attracted much attention as a result of the characteristic nanostructure of these assemblies and because of their association with neurodegenerative diseases. Here we report the structural and conformational properties of a peptide-conjugated graft copolymer, poly(gamma-methyl-L-glutamate) grafted polyallylamine (1) in a water-2,2,2-trifluoroethanol solution as a simple model for amyloid formation. Atomic force microscopy revealed that the globular peptide 1 self-assembles into nonbranching fibrils that are about 4 nm in height under certain conditions. These fibrils are rich in beta-sheets and, similar to authentic amyloid fibrils, bind the amyloidophilic dye Congo red. The secondary and quaternary structures of the peptide 1 can be controlled by manipulating the pH, solution composition, and salt concentration; this indicates that the three-dimensional packing arrangement of peptide chains is the key factor for such fibril formation. Furthermore, the addition of carboxylic acid-terminated poly(ethylene glycol), which interacts with both of amino groups of 1 and hydrophobic PMLG chains, was found to obviously inhibit the alpha-to-beta structural transition for non-assembled peptide 1 and to partially cause a beta-to-alpha structural transition against the 1-assembly in the beta-sheet form. These findings demonstrate that the amyloid fibril formation is not restricted to specific protein sequences but rather is a generic property of peptides. The ability to control the assembled structure of the peptide should provide useful information not only for understanding the amyloid fibril formation, but also for developing novel peptide-based material with well-defined nanostructures.     

XPS study on valence band structures of transition-metal trisulfides,TiS3, NbS3, and TaS3

Transition-metal trisulfides, TiS₃, NbS₃, and TaS₃, with a quasi-one-dimensional structure are investigated by X-ray photoelectron spectroscopic (XPS) measurements to obtain information on the valence band structures. The band structures at the Fermi level of these compounds correspond well to their transport properties. A shoulder is observed at the top of the valence band in NbS₃ and TaS₃, suggesting that this band is made up of the metal d_z² electrons. The d_z² band is occupied in NbS₃ and TaS₂ and empty in TiS₃. The characteristic features at the top of the valence band in NbS₃ imply the occurrence of d_z² band separation, which leads to a semiconducting nature.     

Gas permeability and permselectivity of fluorinated polybenzoxazoles

Gas permeability and permselectivity are investigated for polybenzoxazoles from bis(3-amino-4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane (BAHHP) and aromatic diacid chlorides. Effects of thermal cyclization on the permeation properties are also investigated. The polybenzoxazole from BAHHP and 4,4′-(1,1,1,3,3,3-hexafluoroisopropylidene)dibenzoyl chloride (HFDB) displays high performance for CO₂/CH₄ separation ( $ {\rm P}_{{\rm CO}_2 } $ = 6.1 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, and $ {{{\rm P}_{{\rm CO}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm CO}_2 } } {{\rm P}_{{\rm CH}_4 } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_4 } }} $ = 38 at 35°C). The polybenzoxazole from BAHHP and 2,6-naphthalene dicarbonyl chloride displays high performance for H₂/CO or H₂/CH₄ separation ( $ {\rm P}_{{\rm H}_2 } $ = 2.4 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CO}} }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CO}} }} $ = 71, and $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CH}_{\rm 4} } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_{\rm 4} } }} $ = 250). Permeation properties for the polybenzoxazole from BAHHP and HFDB are close to those for a polyimide of similar chemical structure. The permeation properties are discussed in connection with packing density and local segmental mobility. © 1992 John Wiley & Sons, Inc.     

Retronasal Aroma of Beef Pate Analyzed by a Chewing Simulator

In retronasal aroma, the targeted aroma compounds are released from food during chewing. The changes in the food structures during chewing strongly influence the release of the compounds, therefore affecting the perception of food. Here, the relationship between retronasal aroma and food deliciousness based on the physicochemical properties of aroma compounds was examined. We considered the consumption of solid foods and the effect of oral parameters in elderly people. Beef pate was used as a model food sample to study the effect of the release of aroma compounds under controlled in vitro mastication and salivation conditions using a chewing simulator. We identified the effects of coexisting ingredients such as beef fat on the time course behavior of the release of aroma compounds. In particular, the release of the middle types of aromas was significantly faster with stronger chewing force, and higher with a high fat content of the sample. In addition, a larger release intensity was observed when soy proteins were partially substituted for beef proteins. Using an appropriate model saliva, a change in the salting-out effect from the saliva composition was found to be a factor, which could explain the lowering of aroma sensation in an elderly person.     

Temperature Characteristics of Vibrating Type Sensor Using Micromachined Optical Fiber-Tip

An optical sensor using a quartz core microcantilever was fabricated by etching clad layer from optical fiber. The temperature dependence of the resonance frequency of this sensor was measured in atmosphere and water. The temperature coefficient of the resonance frequency in water was 1.3×10⁻³/°C, which was about one order larger than that (2.3×10⁻⁴/°C) in atmosphere. This was caused by increase of additional mass due to temperature dependence of the viscosity of water, while, the increase of the resonance frequency in atmosphere was caused by temperature dependence of Young’s modulus of the quartz core. These results were evaluated theoretically using a “string-of-beads” model.     

Synthesis of 2,3-dihydro-1H-isoindole-1-thiones via the bromine–lithium exchange between 1-bromo-2-(1-isothiocyanatoalkyl)benzenes and butyllithium

The reaction of 1-bromo-2-(1-isothiocyanatoalkyl)benzenes, which are easily derived from 2-bromophenyl ketones or (2-bromophenyl)methanamine, with butyllithium generates 1-(1-isothiocyanatoalkyl)-2-lithiobenzenes, which immediately underwent intramolecular cyclization to give rise to the corresponding 3-substituted and 3,3-disubstituted 2,3-dihydro-1H-isoindole-1-thiones in good yields.     

Synthesis of novel 4′-C-methyl-1′,3′-dioxolane pyrimidine nucleosides and evaluation of its anti-HIV-1 activity

The key glycosyl donor for the target molecule 12 was prepared by two-step sequences; (1) acetalization of tert-butyldimethylsilyloxyacetaldehyde with 3-bromopropanediol, (2) DBN-initiated β-elimination of the resulting 2-(tert-butyldimethylsilyloxy)methyl-4-bromomethyl-1,3-dioxolane 11. Electrophilic glycosidation between 12 and silylated pyrimidine nucleobase proceeded efficiently to provide a mixture of β- and α-anomers of the respective glycosides 14 and 15. Tin radical-mediated reduction of the bromomethyl functional group of 14 and 15 gave protected 4′-C-methyl-dioxorane uracil- 16 and thymine nucleoside 17. The respective cytosine nucleoside 18 was synthesized from 16. De-silylation of 4′-methyl-1′,3′-dioxolane pyrimidine nucleosides 16–18 gave the target molecules. Evaluation of the anti-HIV-1 activity of the β- and α-anomers of the novel 4′-C-methyl-1′,3′-dioxolane nucleosides 22β,α–24β,α revealed that none of the nucleoside derivatives possess anti-viral activity against HIV-1 and show cytotoxicity against MT-4 cells at 100 μM.     

Preparation of Molecule‐Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves

Microdevices designed for practical environmental pollution monitoring need to detect specific pollutants such as dioxins. Bisphenol A (BPA) has been widely used as a monomer for the synthesis of polycarbonate and epoxy resins. However, the recent discovery of its high potential ability to disrupt human endocrine systems has made the development of smart systems and microdevices for its detection and removal necessary. Molecule‐responsive microsized hydrogels with β‐cycrodextrin (β‐CD) as ligands are prepared by photopolymerization using a fluorescence microscope. The molecule‐responsive micro‐hydrogels show ultra‐quick shrinkage in response to target BPA. Furthermore, the flow rate of a microchannel is autonomously regulated by the molecule‐responsive shrinking of their hydrogels as smart microvalves.

     

Solubility of Anthraquinone Derivatives in Supercritical Carbon Dioxide: New Correlations

Solubility of several anthraquinone derivatives in supercritical carbon dioxide was readily available in the literature, but correcting ability of the existing models was poor. Therefore, in this work, two new models have been developed for better correlation based on solid–liquid phase equilibria. The new model has five adjustable parameters correlating the solubility isotherms as a function of temperature. The accuracy of the proposed models was evaluated by correlating 25 binary systems. The proposed models observed provide the best overall correlations. The overall deviation between the experimental and the correlated results was less than 11.46% in averaged absolute relative deviation (AARD). Moreover, exiting solubility models were also evaluated for all the compounds for the comparison purpose.     

Effects produced by metal-coated near-field probes on the performance of silicon waveguides and resonators

We study the effects of metal-coated fiber near-field probes on the performance of nanophotonic devices. Employing a heterodyne near-field scanning optical microscope and analyzing transmission characteristics, we find that a metal-coated probe can typically introduce a 3 dB intensity loss and a 0.2 rad phase shift during characterization of a straight waveguide made in a silicon-on-insulator system. In resonant nanophotonic structures such as a 5 mum radius microring resonator, we demonstrate that the probe induces a 1 nm shift in resonant wavelength and decreases the resonator quality factor, Q, from 1100 to 480.