Influence of helical twisting power on the photoswitching behavior of chiral azobenzene compounds: applications to high-performance switching devices

Five photochromic chiral azobenzene compounds and one nonphotochromic chiral compound were synthesized and characterized by IR, 1H NMR spectroscopy, and elemental analysis. Cholesteric liquid crystalline phases were induced by mixing of the nonphotochromic chiral compound and one of the photochromic chiral azobenzene compounds in a host nematic liquid crystal (E44). The helical pitch of the induced cholesteric phase was determined by Cano's wedge method and the helical twisting power (HTP) of each sample was thus determined. The helical twisting powers of azobenzene compounds were decreased upon UV irradiation, due to trans-->cis photoisomerization of azobenzene molecules. Among the azobenzene compounds synthesized in our study, Azo-5, with isomannide (radical) as chiral photochromic dopant, showed the highest HTP and contrast ratio (Tmax/Tmin). Photoswitching between compensated nematic phase and cholesteric phase was achieved through reversible trans<-->cis photoisomerization of the chiral azobenzene molecules through irradiation with UV and visible light, respectively. Transmission rates (contrast ratios) increased with decreasing helical pitch length in the induced cholesteric phase. The influence of helical twisting power on the photoswitching behavior of chiral azobenzene compounds is discussed in detail.     

Base-specific and enantioselective studies for the DNA binding of iron(II) mixed-ligand complexes containing 1,10-phenanthroline and dipyrido[3,2-a:2',3'-c]phenazine

Base specificity and enantioselectivity for the DNA binding of [Fe(phen)2(dppz)]2+ (phen=1,10-phenanthroline and dppz=dipyrido[3,2-a:2',3'-c]phenazine) have been studied by determining the equilibrium binding constant (Kb) of the iron(II) complex to calf thymus DNA (ct-DNA), poly[(dA-dT)2], poly[(dG-dC)2] and poly[(dI-dC)2] using spectrophotometric titration and by monitoring the CD spectral profile of the iron(II) complex in the presence and absence of different types of DNA using circular dichroism (CD) spectroscopy, respectively. It has been shown that [Fe(phen)2(dppz)]2+ prefers to intercalate into the A-T and I-C sequences of poly[(dA-dT)2] and poly[(dI-dC)2] rather than into the G-C sequences of poly[(dG-dC)2] or into the base pairs of ct-DNA. In contrast to previous reports, it is a surprising observation that the enantioselectivity of the DNA binding for [Fe(phen)2(dppz)]2+ is base-dependent in nature. The Delta-enantiomer of [Fe(phen)2(dppz)]2+ is preferentially intercalated into the base pairs of poly[(dG-dC)2] or ct-DNA as indicated by its CD spectral profiles. On the other hand, the Lambda-enantiomer of [Fe(phen)2(dppz)]2+ is favorably intercalated into poly[(dA-dT)2] or poly[(dI-dC)2] as suggested by the opposite CD spectral profile. This preferential binding of Lambda-[Fe(phen)2(dppz)]2+)for the A-T sequence may be attributed to the fact that the binding site for the A-T sequence is relatively facile and thus the steric effect caused by the ancillary (non-intercalated) phen ligands is alleviated. The degree of enantioselectivity represented by inversion constants (Kinv) decreases as the salt concentration in the solution increases, indicating that electrostatic interaction is also operating in the ct-DNA-binding events of the iron (II) complex.     

Antibody immobilization to phospholipid polymer layer on gold substrate of quartz crystal microbalance immunosensor

To modify gold electrode for immunosensor to construct an artificial cell membrane structure, water-soluble amphiphilic phospholipid polymer, poly[2-methacryloyloxyehtyl phosphorylcholine-co-n-butyl methacrylate-co-p-nitrophenyloxycarbonyl poly(ethylene glycol) methacrylate (PMBN)] was applied. The polymer had active ester groups for immobilization of biomolecules and it was converted partially to thiol groups for binding to gold substrates. The partially thiolated PMBN was adsorbed on a gold electrode of quartz crystal microbalance (QCM). Surface characterization of adsorbed PMBN layers was thoroughly investigated with reflectance anisotropy spectroscopy, ellipsometry spectroscopy, dynamic contact angle and X-ray photoelectron spectroscopy measurements. Among several PMBN, having different degree of thiolation, it was concluded that 21.5% thiolated PMBN layer had the most well-ordered phosphorylcholine groups in its outer surface. The proteins adsorption test revealed that the phosphorylcholine group on the outer side of PMBN layers, which was substituted their active ester groups by glycine, showed suppress the non-specific adsorption of proteins, such as bovine serum albumin and γ-globulin. Also, through antigen–antibody binding evaluation, the anti-C-reactive protein antibody immobilized on the PMBN surface worked well and it was confirmed that denaturation of the antibody on the PMBN layers was hardly occurred in spite of 60 days storage at 4 °C. The antibody conjugated phospholipid polymer layer with well-ordered phosphorylcholine group could be outstanding functional membrane for biomedical diagnostic devices without non-specific binding and reduction of immunologic activity of immobilized antibody.     

Photoinduced phospholipid polymer grafting on Parylene film: advanced lubrication and antibiofouling properties

Poly(p-xylylene) (Parylene C) coatings have been applied in implantable electronic devices because of their electrical insulation and moisture barrier properties. To provide lubrication and an antibiofouling surface, a biomimetic phospholipid polymer--poly(2-methacryloyloxyethyl phosphorylcholine (MPC))--was grafted from the surface using UV irradiation with benzophenone as an initiator. The poly(MPC) grafting on the Parylene C films was confirmed by attenuated total reflection-Fourier transfer inflated irradiation, X-ray photoelectron spectroscopy and ellipsometry. These analyses indicated that the Parylene C films were completely covered by the poly(MPC)-graft layer with an average thickness of 140 nm under dry condition. The atomic force microscope (AFM) images revealed that the poly(MPC)-graft chains extended under wet condition. However, they formed globular structures under dry condition. Water contact angle measurements revealed a decreased receding angle of 29.5 degrees on the poly(MPC)-grafted surface with a high hysteresis of 41.4 degrees. These results indicate that the poly(MPC)-graft chains gain mobility in a wet environment. The average kinetic friction coefficient of the poly(MPC)-grafted surface in water was 0.018, which was 90% lower than that of the original surface. The in vitro single protein adsorption reduced by over 70% due to the poly(MPC) grafting. The hydrated poly(MPC)-graft chains are considered to provide lubrication and antibiofouling properties. The surface zeta potential measurement clarified the electroneutrality of the poly(MPC)-grafted surface. We concluded that the poly(MPC) grafting from the Parylene C layer significantly improved its surface properties and, subsequently, its biological properties.     

Spectra analysis for macromolecular systems: Chain‐length effects in polymer particles

A complete set of frequencies for the density of states spectrum g(ω) is obtained for 6000‐atom polymer particles involving all 18,000 degrees of freedom. We efficiently generate the particle using molecular dynamics and molecular mechanics, and systematically analyze the spectra and thermal properties as a function of chain lengths: from one to 100 monomers. The density of states spectrum g(ω) shows a higher number of low‐frequency modes for the polymer particle with a smaller chain length, which results in a higher heat capacity at low temperature. Gibbs free energy was also calculated for the formation of a particle from a crystal as a function of temperature to evaluate thermal stability of those systems. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1812–1823, 2000     

Preparation of micron-size monodisperse poly(2-hydroxyethyl methacrylate) particles by dispersion polymerization

Dispersion polymerization of 2-hydroxyethyl methacrylate using four categories of polymeric stabilizers in a mixture of good and poor solvents was performed to produce polymeric particles. The stabilizers employed were methyl methacrylate and styrene homopolymers, methacryloyl-terminated poly(methyl methacrylate) and polystyrene macromonomers, an amphiphilic poly(methyl methacrylate-co-methacrylic acid-graft-styrene), and polybutadiene derivatives containing reactive vinyl groups. Dispersion copolymerization with a small amount of the macromonomer gave micron-size particles with relatively narrow size distribution. The amphiphilic graft copolymer and the polybutadiene derivatives also afforded monodisperse particles. The mixed ratio between good and poor solvents greatly affected the particle size and size distribution. © 1996 John Wiley & Sons, Inc.     

Rare earth metal initiated polymerization to give high polymers with narrow molecular weight distribution

Organolanthanide (III) initiated polymerization of alkyl acrylates gave high molecular weight poly(alkyl acrylate)s with extremely narrow molecular weight distribution in high yield. Molecular weight of the polymers increased linearly with the conversion. Random and block copolymerizations of acrylate monomers (alkyl acrylates and MMA) were successful. For development of olefin polymerization catalystsbased on lanthanide complexes, bulky substituents were introduced into Me₂Si bridged Cp rings and they were used as ligands of lanthanide complexes. Tri- and divalent lanthanide complexes with such a ligand system showed high activity for olefin polymerization and gave high molecular weight polyolefins.