Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.     

Thermodynamic analysis of duplex formation of the heterochiral DNA with L-deoxyadenosine.

An L-DNA, the mirror-image isomer of natural DNA, has extraordinary nuclease resistance, and thus the molecules should be promising reagents for many applications, such as antisense technology. However, little is known about the structural and thermodynamic properties of DNAs with this modified nucleotide. In this study, we prepared the L-nucleotide (L-dA) and introduced it into oligodeoxyribonucleotides to assess the ability of the L-nucleotide as a functional molecule for many applications based on the DNA hybridization. Two decamers with an L-dA at the center were synthesized and duplexes with the complementary DNA strand were applied to structural and thermodynamic analyses. The structural study by CD spectra showed that the structures of both modified "L/D-D" duplexes were the typical B-form. This result suggests that the global structure of DNA was not collapsed by the introduction of an L-DNA. Thermodynamic parameters (deltaH degrees, deltaS degrees, and deltaG degrees 37) of the duplex formation, determined by UV melting experiments, indicated that the both duplexes were destabilized at about 2.5 to 3.0 kcal mol(-1) by the introduced L-dA, mainly due to an unfavorable enthalpic effect. In conjunction with information by other researchers, these results suggest that the L-DNA affect on the duplex structure and the stability vary locally; thus, the thermodynamic stability of modified L/D-D duplexes should be predictable by the nearest-neighbor thermodynamic parameters.     

Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection

A simple and highly sensitive method for determining the fatty acid composition of food lipids containing conjugated linoleic acid (CLA) is described. The method is based on the separation of the 9-anthrylmethyl ester derivatives of saturated and unsaturated (conjugated and non-conjugated) fatty acids by reversed-phase high-performance liquid chromatography with fluorescence detection. Just like the other fatty acids, CLA reacts readily with 9-anthryldiazomethane at room temperature to produce 9-anthrylmethyl esters without isomerization and decomposition of the conjugated double bonds. Clear resolution of the individual fatty acids as their 9-anthrylmethyl esters is achieved on a highly efficient octadecylsilylated silica column (150- x 3-mm i.d., 3-microm particle size) using a stepwise gradient elution with methanol-water. The method is standardized with commercially available CLA isomers (cis-9, trans-11 and trans-10, cis-12-octadecadienoic acids, and their cis,cis and trans,trans isomers) and applied for determination of the fatty acid compositions of milk and sdairy products.     

Effect of polymer excipients on the enzyme activity of lyophilized bilirubin oxidase and beta-galactosidase formulations

The effects of excipients on the protein stability during lyophilization as well as the storage stability of lyophilized bilirubin oxidase (BO) and beta-galactosidase (GA) formulations were studied using four polymer excipients: dextran, polyvinylalcohol (PVA), poly(acrylic acid) (PAA), and alpha, beta-poly(N-hydroxyethyl)-L-aspartamide (PHEA). Denaturation of BO and GA during lyophilization largely depended on the excipient used. Dextran appeared to cause severe damage to proteins, whereas PHEA protected proteins effectively from denaturation. Storage stability of BO and GA formulations also depended on the excipients, such that the formulations containing dextran and PAA were relatively unstable. Storage stability was improved by absorption of a small amount of water for all the formulations studied. Absorption of a larger amount of water, however, decreased the storage stability of the formulations containing PVA, PAA or PHEA. In contrast, the storage stability of formulations containing dextran did not decrease noticeably with increasing water. This may be because formulations containing dextran have a higher glass transition temperature than formulations containing PVA, PAA or PHEA when a large amount of water is absorbed.     

The first synthesis of a methano[60]fullerene with an electron-donating group at the methano-bridge carbon: synthesis and reaction of aminomethano[60]fullerene

[reaction: see text] Aminomethano[60]fullerene was synthesized for the first time as a trifluoromethanesulfonic acid salt by applying the Curtius rearrangement of azidocarbonylmethano[60]fullerene as the key reaction. Aminomethano[60]fullerene thus obtained was found to be able to react with various acyl chlorides to afford the corresponding amides.     

Ion chromatographic separation of hydrogen ion and other common mono- and divalent cations

We introduced an approach to the ion chromatographic determination of common mono- and divalent cations including hydrogen ion and demonstrated the ability of a C30 column dynamically coated first with dodecylsulfate and then with 18-crown-6 ether to separate the cations by ion-exchange mechanism. Using an ethylenediamine solution containing a small concentration of 18-crown-6 ether and lithium dodecylsulfate at pH 6.2 as eluent, the cations were eluted in the order Li < Na+ < NH4+ < H+ < K+ < Mg2+ < Ca2+ with symmetrical peaks. The conductivity vs. concentration plots were linear about three orders of magnitude, from millimolar to micromolar; and the detection limits were all < 0.6 microM. Rainwater was analyzed directly using this ion chromatographic system with satisfactory results.     

Electrochemical analysis of single nucleotide polymorphisms of p53 gene

Single nucleotide polymorphisms (SNPs) of cancer repression gene p53 were analyzed electrochemically with ferrocenyl naphthalene diimide (1) as a hybridization indicator. The SNPs studied were the transition to A from G in the codon for amino acid at positions 175, 248 or 273 and the transversion to C from G in the codon for the amino acid at position 72. Thus, 20-meric oligonucleotides carrying the SNP site were used both as a sample and a probe with the latter immobilized on an electrode. Even one base difference on the p53 gene resulted in a significant difference in the current response of 1 and the magnitude of the response correlated with the amount of the DNA hybrid on the electrode. Moreover, when PCR products of exon 4, on which the P72/R72 SNP resides, of the p53 gene were analyzed by this method, the heterozygote and homozygotes were discriminated with modest precision.     

Structural assignment of isomeric 2-aminopyridine-derivatized oligosaccharides using negative-ion MSn spectral matching

To investigate the possibility of structural assignment based on negative-ion MS2 spectral matching, three isomeric pairs of 2-aminopyridine (PA)-derivatized non-fucosylated, fucosylated, and sialylated oligosaccharides (complex type N-glycans) were analyzed using high-performance liquid chromatography/ion trap mass spectrometry (HPLC/ITMS) with a sonic-spray ionization (SSI) source. In the SSI negative-ion mode the deprotonated molecule [M-2H]2- becomes prominent. Negative-ion MS2 spectra derived from such ions contain many fragment types (B and Y, C and Z, A, and D) and therefore are more informative than the positive-ion MS2 spectra derived from [M+H+Na]2+ ions, which usually consist mainly of B and Y fragment ions. In particular the internal ions (D- and E-type ions) provided useful information about the alpha1-6 branching patterns and the bisecting GlcNAc residue. Spectral matching based on the correlation coefficients between negative-ion MS2 spectra was performed in a manner similar to the positive-ion MS2 spectral matching previously reported. It was demonstrated that negative-ion MS2 spectral matching is as useful and applicable to the structural assignment of relatively large non-fucosylated, fucosylated, and sialylated PA-oligosaccharide isomers as its positive-ion counterpart.     

Asymmetric selective polymerization of racemic methacrylates with the cyclohexylmagnesium bromide-(−)-sparteine system

Asymmetric selective (or stereoelective) polymerization of various racemic methacrylates with cyclohexylmagnesium bromide (c-HexMgBr)-(-)sparteine (1/1.2) catalyst was studied in toluene at ?78°C. The methacrylates of α-ethylbenzyl (EBMA), α-isopropylbenzyl (i-PBMA), α-tert-butylbenzyl (t-BBMA), sec-butyl (s-BuMA), 1-methylallyl (1-MAMA), 2,3-epoxypropyl (2,3-EPMA), 2-phenylpropyl (2-PPMA), and menthyl (MentMA) alcohols were used as racemic monomers. In the polymerization of EBMA and i-PBMA (S) enantiomers were consumed preferentially and the optical purity of initially polymerized i-PBMA was as high as 97%. Optically pure (R) monomers were recovered at about 60% conversion for i-PBMA and 80% for EBMA. In t-BBMA, however, the (R) monomer was consumed preferentially over the (S) isomer. In the polymerization of s-BuMA and 1-MAMA (S) monomers were consumed in excess and the optical purity of the polymers formed in the early stage was about 30%. In 2,3-EPMA and 2-PPMA, which have asymmetric centers at the β position from the ester oxygen, (R) antipodes were more reactive. MentMA did not polymerize at ?78°C. Enantiomer selectivity ratios r_S and r_R were determined in the polymerization of EBMA, i-PBMA, and 1-MAMA. All polymers except poly(t-BBMA) were highly isotactic, but the tacticity of poly(t-BBMA) could not be estimated. Circular dichroism spectra of optically active polymers of α-substituted benzyl esters were measured.     

Coulometric argentometric determination of microamounts of sulphur in iron and steel after reduction to hydrogen sulphide with iron(II) in strong phosphoric acid medium

A coulometric method was developed for the determination of microamounts of sulphur in iron and steel. Hydrogen sulphide is quantitatively evolved by reduction with iron(II) in strong phosphoric acid medium and is titrated with electrolytically generated silver ion from a silver anode. Microamounts of sulphide (2.96–224.3 μg) in sodium sulphide standard solutions could be determined with an error of only a few percent. Sulphur in a potassium sulphate standard solution is quantitatively reduced to hydrogen sulphide and could be separated from the solution by heating and determined accurately. Trace amounts of sulphur (7–100 μg g^?1) in iron and steels could be determined with a standard deviation of 0.7–2.1 μg g^?1.