Substitution mechanism of Zn ions in β-tricalcium phosphate

Zn-doped β-tricalcium phosphate (β-TCP) is synthesized by the solid-state reaction method. The substitution mechanism of Zn ions in β-TCP synthesized here is investigated by carrying out a combination of near-edge X-ray absorption fine structure (NEXAFS) measurements and first-principles calculations. From the results of the present study, the substitution site for Zn ions in β-TCP is successfully determined.     

Selective detection of minor isotope lines in saturated absorption spectra by absorption filtering of major isotope lines

We demonstrate a simple method that can be used to detect minor isotope lines in a saturated absorption spectrum by the absorption filtering of major isotope lines. We investigate this method for use in the spectroscopy of the ¹S₀-¹P₁ transition in Yb at 399 nm by controlling the density of Yb atoms by varying the discharge current of a hollow cathode lamp. The performance of an extended-cavity laser diode using a high-power ultraviolet diode chip is also analyzed.     

Rational design of a photoswitchable DNA glue enabling high regulatory function and supramolecular chirality transfer

Short, complementary DNA single strands with mismatched base pairs cannot undergo spontaneous formation of duplex DNA (dsDNA). Mismatch binding ligands (MBLs) can compensate this effect, inducing the formation of the double helix and thereby acting as a molecular glue. Here, we present the rational design of photoswitchable MBLs that allow for reversible dsDNA assembly by light. Careful choice of the azobenzene core structure results in excellent band separation of the E and Z isomers of the involved chromophores. This effect allows for efficient use of light as an external control element for duplex DNA formation and for an in-depth study of the DNA–ligand interaction by UV-Vis, SPR, and CD spectroscopy, revealing a tight mutual interaction and complementarity between the photoswitchable ligand and the mismatched DNA. We also show that the configuration of the switch reversibly dictates the conformation of the DNA strands, while the dsDNA serves as a chiral clamp and translates its chiral information onto the ligand inducing a preference in helical chirality of the Z isomer of the MBLs.

We present the rational design of photoswitchable DNA glue to trigger the reversible formation of duplex DNA by light. The supramolecular assembly shows a mutual interaction between ligand and DNA, which induces a preferred helicity in the switch.     

Chiral ruthenabicyclic complexes: precatalysts for rapid, enantioselective, and wide-scope hydrogenation of ketones

A novel ruthenabicyclic complex with base shows excellent catalytic activity in the asymmetric hydrogenation of ketones. The turnover frequency of the hydrogenation of acetophenone reaches about 35,000 min(-1) in the best case, affording 1-phenylethanol in >99% ee. Several aliphatic and base-labile ketones are smoothly converted to the corresponding alcohols in high enantioselectivity. The catalytic cycle for this hydrogenation, in which the ruthenabicyclic structure of the catalyst is maintained, is proposed on the basis of the deuteration experiment and spectroscopic analysis data.     

Self‐Supported Chiral Titanium Cluster (SCTC) as a Robust Catalyst for the Asymmetric Cyanation of Imines under Batch and Continuous Flow at Room Temperature

A robust heterogeneous self‐supported chiral titanium cluster (SCTC) catalyst and its application in the enantioselective imine‐cyanation/Strecker reaction is described under batch and continuous processes. One of the major hurdles in the asymmetric Strecker reaction is the lack of availability of efficient and reusable heterogeneous catalysts that work at room temperature. We exploited the readily hydrolyzable nature of titanium alkoxide to synthesize a self‐supported chiral titanium cluster (SCTC) catalyst by the controlled hydrolysis of a preformed chiral titanium‐alkoxide complex. The isolated SCTC catalysts were remarkably stable and showed up to 98 % enantioselectivity (ee) with complete conversion of the imine within 2 h for a wide variety of imines at room temperature. The heterogeneous catalysts were recyclable more than 10 times without any loss in activity or selectivity. The robustness, high performance, and recyclability of the catalyst enabled it to be used in a packed‐bed reactor to carry out the cyanation under continuous flow. Up to 97 % ee and quantitative conversion with a throughput of 45 mg h^?1 were achieved under optimized flow conditions at room temperature in the case of benzhydryl imine. Furthermore, a three‐component Strecker reaction was performed under continuous flow by using the corresponding aldehydes and amines instead of the preformed imines. A good product distribution was obtained for the formation of amino nitriles with ee values of up to 98 %. Synthetically useful ee values were also obtained for challenging α‐branched aliphatic aldehyde by using the three‐component continuous Strecker reaction.     

Structure-activity studies on the fluorescent indicator in a displacement assay for the screening of small molecules binding to RNA

A series of xanthone and thioxanthone derivatives with aminoalkoxy substituents were synthesized as fluorescent indicators for a displacement assay in the study of small-molecule-RNA interactions. The RNA-binding properties of these molecules were investigated in terms of the improved binding selectivity to the loop region in the RNA secondary structure relative to 2,7-bis(2-aminoethoxy)xanthone (X2S) by fluorimetric titration and displacement assay. An 11-mer double-stranded RNA and a hairpin RNA mimicking the stem loop IIB of Rev response element (RRE) RNA of HIV-1 mRNA were used. The X2S derivatives with longer aminoalkyl substituents showed a higher affinity to the double-stranded RNA than the parent molecule. Introduction of a methyl group on the aminoethoxy moiety of X2S effectively modulated the selectivity to the RNA secondary structure. Methyl group substitution at the C1' position suppressed the binding to the loop regions. Substitution with two methyl groups on the amino nitrogen atom resulted in reducing the affinity to the double-stranded region by a factor of 40%. The effect of methyl substitution on the amino nitrogen atom was also observed for a thioxanthone derivative. Titration experiments, however, suggested that thioxanthone derivatives showed a more prominent tendency of multiple binding to RNA than xanthone derivatives. The selectivity index calculated from the affinity to the double-stranded and loop regions suggested that the N,N-dimethyl derivative of X2S would be suitable for the screening of small molecules binding to RRE.     

Rhenium-catalyzed regioselective synthesis of multisubstituted pyridines from β-enamino ketones and alkynes via C-C bond cleavage

A new method is described for the regioselective synthesis of multisubstituted pyridine derivatives. Treatment of N-acetyl β-enamino ketones with alkynes in the presence of the rhenium catalyst, Re(2)(CO)(10), gives multisubstituted pyridines regioselectively. In this reaction, the N-acetyl moieties are important for the selective formation of the multisubstituted pyridines. This reaction proceeds via insertion of alkynes into a carbon-carbon single bond of β-enamino ketones, intramolecular nucleophilic cyclization, and elimination of acetic acid.     

In situ generation of active sites in olefin metathesis

The depth of our understanding in catalysis is governed by the information we have about the number of active sites and their molecular structure. The nature of an active center on the surface of a working heterogeneous catalyst is, however, extremely difficult to identify and precise quantification of active species is generally missing. In metathesis of propene over dispersed molybdenum oxide supported on silica, only 1.5% of all Mo atoms in the catalyst are captured to form the active centers. Here we combine infrared spectroscopy in operando with microcalorimetry and reactivity studies using isotopic labeling to monitor catalyst formation. We show that the active Mo(VI)-alkylidene moieties are generated in situ by surface reaction of grafted molybdenum oxide precursor species with the substrate molecule itself gaining insight into the pathways limiting the number of active centers on the surface of a heterogeneous catalyst. The active site formation involves sequential steps requiring multiple catalyst functions: protonation of propene to surface Mo(VI)-isopropoxide species driven by surface Br?nsted acid sites, subsequent oxidation of isopropoxide to acetone in the adsorbed state owing to the red-ox capability of molybdenum leaving naked Mo(IV) sites after desorption of acetone, and oxidative addition of another propene molecule yielding finally the active Mo(VI)-alkylidene species. This view is quite different from the one-step mechanism, which has been accepted in the community for three decades, however, fully consistent with the empirically recognized importance of acidity, reducibility, and strict dehydration of the catalyst. The knowledge acquired in the present work has been successfully implemented for catalyst improvement. Simple heat treatment after the initial propene adsorption doubled the catalytic activity by accelerating the oxidation and desorption-capturing steps, demonstrating the merit of knowledge-based strategies in heterogeneous catalysis. Molecular structure of active Mo(VI)-alkylidene sites derived from surface molybdena is discussed in the context of similarity to the highly active Schrock-type homogeneous catalysts.     

Nucleation behaviour and anomalous eutectic formation in highly undercooled Fe2O3-La2O3 eutectic melts

Employing an aero-acoustic levitator, the Fe₂O₃-16.5 mol% La₂O₃ eutectic alloy was levitated, melted, undercooled and then solidified under a containerless condition when a continuous laser beam heating system was incorporated. By revealing the surface and cross-sectional microstructures, copious nucleation is confirmed to take place in the undercooled melts solidified by either an external seeding or spontaneous crystallization. The nucleation behaviour of eutectic alloys is summarized, indicating that copious nucleation may be an intrinsic attribute of a eutectic system with the exact eutectic composition in unconstrained solidification. Considering the complexity level of crystal structures of eutectic oxide phases in the Fe₂O₃-La₂O₃ alloy, the linear kinetic constants are approximately estimated and the growth kinetics are discussed. The sluggish growth kinetics of the perovskite-type phase, that is LaFeO₃ with a higher complexity level in a unit cell leads to a decoupled growth within a single eutectic colony when the melt is undercooled to exceed the critical undercooling ΔT = 125 K. It is the decoupled growth that results in the formation of anomalous eutectics. The present concept based on the kinetic constant of different phases can also be applicable to account for the growth behaviour of other oxide eutectics when considering the stable and metastable eutectic reactions in different solidification conditions. The nucleation behaviour and growth modes in some oxide eutectic systems have been predicted in the free solidification from an undercooled state.