Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

An oxazaphospholidine approach for the stereocontrolled synthesis of oligonucleoside phosphorothioates

The stereocontrolled synthesis of oligodeoxyribonucleoside phosphorothioates (PS-ODNs) using nucleoside 3'-O-oxazaphospholidine derivatives as monomer units is described. 2-Chloro-1,3,2-oxazaphospholidine derivatives were prepared from six kinds of enantiopure 1,2-amino alcohols and used for the phosphitylation reactions of 5'-O-protected nucleosides. A detailed study of these reactions revealed that the diastereoselectivity of the reaction depended on the structure of the enantiopure 1,2-amino alcohol, the reaction temperature, and the amine used as a scavenger of HCl. In addition, ab initio molecular orbital calculations for the 2-chlorooxazaphospholidine derivatives were carried out to elucidate the mechanism of these diastereoselective phosphitylation reactions. The LUMO of the 2-chloro-5-phenyloxazaphospholidine derivatives on the phosphorus atom was found to be almost orthogonal to the P-Cl bond. This LUMO may be involved in the phosphitylation reactions with predominant retention of the P-configuration. A series of dialkyl(cyanomethyl)ammonium salts were developed and used as activators for the condensation reactions of the diastereopure nucleoside 3'-O-oxazaphospholidines with 3'-O-protected nucleosides. In the presence of the new activators, the reactions proceeded rapidly to give the corresponding dinucleoside phosphite triesters. The diastereoselectivity of the condensation reaction did not depend on the counteranion but on the structure of the dialkyl(cyanomethyl)amine. In the presence of the activator, which consists of a relatively small dialkyl(cyanomethyl)amine, the condensation proceeded with excellent diastereoselectivity. After sulfurization and deprotection, diastereopure (R(p))- and (S(p))-dinucleoside phosphorothioates were obtained in excellent yields. The present methodology was also applied to the solid-phase synthesis of stereoregulated PS-ODNs. all-(R(p))-[T(PS)](3)T, all-(S(p))-[T(PS)](3)T, all-(R(p))-d[G(PS)A(PS)C(PS)]T, and all-(R(p))-[T(PS)](9)T were synthesized on a highly cross-linked polystyrene resin.     

Ion chromatographic system with a novel switching suppression device

Ion chromatography (IC) has been a powerful tool for measuring ionic species in environmental samples such as tap, river and drain waters. Suppressor modules (membrane and disposable column types) have been used for reducing the background of a baseline. A new type of suppressor device, which has a suppressor resin and switching valve was developed. Fresh ionic resin is introduced into a groove for each analysis to perform the suppression of the working eluent. The eluent composition for obtaining higher sensitivity and better resolutions among ionic species and carbonate ion was also investigated. Although carbonate buffers are used for ion separation in general, the separation of carbonate ion from other ions was not achieved. A borate eluent resulted in good resolutions and higher sensitivity. A new column was also developed for obtaining higher column efficiency and resolution. The optimization of anion separation using a new IC system (IC-2001) that consists of a new suppressor device, an anion-exchange column (TSKgel SuperIC-Anion, 150x4.6 mm), an autosampler, a conductivity cell and a pump in a compact module is described.     

Preparation and characterization of polypropylene/mesoporous silica nanocomposites with confined polypropylene

Polypropylene (PP)/Ti-MCM-41 nanocomposites were prepared by isospecific propylene polymerization with Ti-MCM-41/Al(i-C₄H₉)₃ catalyst. The cross polarization/magic angle spinning (CP/MAS) ¹³C NMR spectrum of the composite was similar to that of the conventional isotactic PP, and the decrease in the pore volume of Ti-MCM-41 in the nanocomposites, as measured by N₂ adsorption, was consistent with the value calculated from the weight loss in the thermogravimetric analysis (TGA) curve; both these facts attest to propylene polymerization within the mesopores of Ti-MCM-41. Alkali treatment followed by extraction with o-dichlorobenzene allows us to extract the confined PP out of the Ti-MCM-41 mesopores. Although the PP/Ti-MCM-41 nanocomposites do not exhibit a crystalline melting point, the same PP when extracted from the mesopores showed a clear melting point at 154.7 °C; this indicates that the crystallization of PP confined in mesopores is strongly hindered. For the PP polymerized within the confinement, the molecular weight (M_w) and molecular weight distribution (M_w/M_n) were 84,000 and 4.3, respectively; these values were considerably smaller than those of the PP polymerized concurrently outside the Ti-MCM-41 mesopores (M_w = 200,000–450,000, M_w/M_n = 40–75). Therefore, the confinement also has a marked effect on the molecular weight of the PP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3324–3332, 2003     

Induction of a remarkable conformational change in a human telomeric sequence by the binding of naphthyridine dimer: inhibition of the elongation of a telomeric repeat by telomerase

The binding of a dimeric form of the 2-amino-1,8-naphthyridine derivative (naphthyridine dimer) to a human telomeric sequence, TTAGGG, was investigated by UV melting, CD spectra, and CSI-MS measurements. Both the 9-mer d(TTAGGGTTA) and the 15-mer d(TTAGGGTTAGGGTTA) showed apparent melting temperatures (T(m)) of 45.6 and 63.6 degrees C, respectively, in the presence of naphthyridine dimer (30 microM) in sodium cacodylate buffer (50 mM, pH 7.0) containing 100 mM NaCl. The CD spectra at 235 and 255 nm of the 9-mer increased in intensity accompanied with strong induced CDs at 285 and 340 nm upon complex formation with naphthyridine dimer. UV titration of the binding of naphthyridine dimer to the 9-mer at 320 nm showed a hypochromism of the spectra. A Scatchard plot of the data showed the presence of multiple binding sites with different association constants. Cold spray ionization mass spectrometry of the complex between naphthyridine dimer and the 9-mer clearly showed that one to three molecules of the ligand bound to the dimer duplex of the 9-mer. Telomeric repeat elongation assay showed that the binding of naphthyridine dimer to the telomeric sequence inhibits the elongation of the sequence by telomerase.     

Diastereocontrolled synthesis of dinucleoside phosphorothioates using a novel class of activators, dialkyl(cyanomethyl)ammonium tetrafluoroborates

A novel class of activators, dialkyl(cyanomethyl)ammonium tetrafluoroborates 1a-c, has been developed and applied to the condensations of diastereopure 5'-O-tert-butyldiphenylsilylthymidine 3'-cyclic phosphoramidites 3a-d with 3'-O-tert-butyldimethylsilylthymidine (4a). Among them, the condensation of 3a with 4a in the presence of 1a completed within 5 min and gave only one diastereoisomer of the corresponding phosphite 5a. After sulfurization and deprtection, almost diastereopure (Rp)-TpsT 7 was obtained (d.r. = 99:1). Next the 5'-O-(DMTr)nucleoside 3'-phosphoramidites 8a-d containing thymine, N6-benzoyladenine, N4-benzoylcytosine, and N2-phenylacetylguanine have been synthesized and allowed to condense with 3'-O-protected thymidine and 2'-deoxyadenosine. The 5'-O-DMTr group and the N-acyl groups of the nucleobases were compatible with the reaction conditions and the condensations completed quickly with excellent diastereoselectivity.     

Synthesis and complexation of a novel cyclophane

A novel cyclophane, 17, 17, 40, 40-tetramethyl-7, 30-dinitro-1, 10, 24, 33-tetraoxa[2.2.1.2.2.1] metaparaparametaparaparacyclophane, was synthesized by 2:2 cyclization of 3,5-bis(bromomethyl)nitrobenzene, derived from 3,5-dimethylnitrobenzene, and bisphenol A. The cyclophane was found to form 1:1 complex with benzene.