A Comparison of Conventional Gel Stiffness Characterization Techniques with Cavitation Rheology

Experimental Mechanics - Interest in soft gels has arisen in recent years as they can be applied to many fields such as tissue engineering, food additives, and drug delivery. The importance of...     

Novel filled polymer composites prepared from in situ polymerization via a colloidal approach: II. Blends of kaolin/Nylon-6 in situ composites with conventional Nylon-6 and -66

A novel in situ composite comprised of kaolin clay fillers and polyamide 6 (Nylon-6) was synthesized via a colloidal approach by suspending kaolin particles in aqueous caprolactam and then polymerizing the caprolactam under elevated temperature and pressure. This in situ polymerization technique enables the deposition of nylon molecules directly onto the filler surface. It offers a much larger contact surface area for the nylon molecules to interact with the filler particles and enhances filler/matrix interaction through polymer miscibility. The kaolin particles were shown to be uniformly dispersed in Nylon-6 matrix without appreciable agglomeration. In the highly clay-loaded composites such as the 50/50 kaolin/Nylon-6 in situ composite, the deposited nylon molecules probably form a coated layer on the filler particles. This kind of nylon coated fillers may be applied as a reinforcing entity to commercial Nylon-6 or −;66 by improving particle dispersion and melt processability. The 50/50 kaolin/Nylon-6 in situ composites have been used as a masterbatch for blending with commercial Nylon-6 and Nylon-66 to take advantage of their good properties and to reduce cost. Rheology and mechanical properties of the masterbatch/nylon composites have been investigated in comparison with those of the conventional melt-mixed composites. The improvement of rheological and mechanical properties of the in situ composites has been discussed in relation to the composite structure. © 1996 John Wiley & Sons, Inc.     

Novel filled polymer composites prepared from in situ polymerization via a colloidal approach: I. Kaolin/Nylon-6 in situ composites

A mineral-filled in situ composite was prepared by a colloidal approach by first suspending kaolin filler particles in aqueous caprolactam, and then polymerizing caprolactam in situ at high pressure and temperature. The purpose of this colloidal in situ polymerization is to improve particle dispersion and to enhance interaction of the filler to the polymer matrix. X-ray diffraction studies of the in situ kaolin/Nylon-6 composites revealed that the x-ray peak corresponding to the α-crystal form of Nylon-6 diminished with increasing kaolin loading, while the γ-crystal structure became more pronounced. The degree of crystallinity of Nylon-6 remained fairly unchanged with the kaolin loading level in the in situ composites. Calorimetric and dynamic mechanical studies exhibited that the glass transition temperature of the resulting composite increased significantly with increase in kaolin concentration, suggesting strong filler-matrix interaction at the kaolin/Nylon-6 interface. Scanning electron microscopic (SEM) results showed uniform filler dispersion in the in situ composites relative to the conventional melt-mixed composites. Modulus and tensile strength of these in situ composites were found to be distinctively higher than that of the conventional melt-mixed kaolin/Nylon-6 composites. However, as typical for composite materials, drawability and fracture toughness decreased with increasing kaolin loading. © 1996 John Wiley & Sons, Inc.     

Anisotropy of hole structures in oriented polycarbonate probed by two-dimensional angular correlation of annihilation radiation

Two-dimensional angular correlation of annihilation radiation (2D-ACAR) experiments have been performed on an uniaxially oriented polymer, bisphenol-A polycarbonate. The two-dimensional hole structures of unoriented and oriented polymers, determined from the momentum distributions, are found to be spherical and ellipsoidal, respectively. The average hole radii are determined to be 2.9 Å in the unoriented sample and between 2.3 and 3.8 Å in the oriented sample. Applications of the 2D-ACAR method to image the three-dimensional hole structures of polymeric materials are discussed. © 1996 John Wiley & Sons, Inc.     

Water barrier characteristics of plasma polymers of perfluorocarbons

Perfluorocarbon monomers such as C₂F₄, C₂F₆, C₄F₁₀, and mixtures thereof with H₂, were subjected to plasma polymerization and deposited onto low-density polyethylene (LDPE) substrates. The effect of plasma conditions, surface characteristics, and surface dynamics of plasma polymers on their ability to improve the resistance to water vapor permeation was investigated. An optimum discharge energy density was found for a monomer which provided the greatest reduction water vapor permeability. Although all of the plasma polymers show higher hydrophobicity than polyethylene, the reduction in water vapor permeability is not uniquely related to water contact angle. The surface-dynamic stability of a plasma polymer surface was found to be the key factor in determining the barrier performance of the plasma polymer. The extent of change of surface-configuration after water immersion strongly correlated with the improvement in the water vapor permeation resistance. Plasma polymers with the higher surface-dynamic stability provided the better water barrier coating applied on LDPE films. © 1996 John Wiley & Sons, Inc.     

MODELLING OF WAVE PROPAGATION IN THE NEARSHORE REGION USING THE MILD SLOPE EQUATION WITH GMRES-BASED ITERATIVE SOLVERS

The mild slope equation in its linear and non-linear forms is used for the modelling of nearshore wave propagation. The finite difference method is used to descretize the governing elliptic equations and the resulting system of equations is solved using GMRES-based iterative method. The original GMRES solution technique of Saad and Schultz is not directly applicable to the present case owing to the complex coefficient matrix. The simpler GMRES algorithm of Walker and Zhou is used as the core solver, making the upper Hessenberg factorization unneccessary when solving the least squares problem. Several preconditioning-based acceleration strategies are tested and the results show that the GMRES-based iteration scheme performs very well and leads to monotonic convergence for all the test-cases considered.     

Electrochemical formation of cation-exchanging polypyrrole films within various hydrophilic–hydrophobic domains

The electrochemical polymerization technique has been successfully applied to produce conducting polymer film of controlled ion exchange properties. Polypyrrole films were prepared by electro-oxidative polymerization with doping some alkylsulfonates or Nafion. The ion exchange characteristics across polypyrrole films were examined by means of a novel electrochemical technique, namely, the in situ electrochemical quartz crystal microbalance (EQCM) method. According to EQCM measurements, exchanging ion species was found to be successfully controlled by changing the hydrophilic–hydrophobic balance of the incorporated sulfonated-based dopants. The film's characteristics became anion- to cation-exchanging as the dopants became more hydrophobic in nature. The polypyrrole–Nafion(poly(perfluoroethylene sulfonate)) composite film became to be a complete cation exchanger.     

Characterizing Plasma-exposed In0.52Al0.48As Surface Using Photoreflectance-, Raman-, and Photoluminescence Spectra Method

We have performed Photoreflectance (PR), Raman Scattering (RS), and Photoluminescence (PL) experiments to characterize the In_0.52Al_0.48As surface exposed to plasma by a gas mixture of CH₄/H₂/Ar, PR spectra indicate that RIE (plasma) causes defects such as nonradiative recombination centers, scattering centers, and defects leading to the decrease of signal intensity, broaden line width and red shift of the transitions by increasing the rf power. In the Raman scattering study, RIE causes defects against InAs-like and AlAs-like LO modes vibration. As the rf power increased, the maximum of two LO modes shifts towards lower frequency and the line shape becomes increasingly asymmetric. Also, the intensity degrades gradually by disorder and point defects with increasing rf power. The PL transition energies show a red-shift with increasing the rf power. In addition, the spectral feature broadens, and the intensity decreases with rf power higher than 200 w. The consistence of the PL, PR, and RS results indicate that these three methods can be used as sensitive probes to evaluate the near surface damage of the epilayer.     

Phase Transition Energy of the Short Period Basic Polytypes of CdI2

The CdI₂ material grown under similar thermodynamic conditions exhibits several polytypes (phases). Out of these the basic phases are thermodynamically independent and grow with their minimum free (potential) energy. In the present paper we have calculated the Madelung constants cohesive (potential) and the phase transformation energy for the basic phases viz. 2H → 4 H.     

Effect of Cu Ions on the Dipole Moments and Polarization of Strontium Barium Niobate Single Crystals

The crystal growth, the ferroelectric hysteresis loops, and the infrared reflectivity spectra of coppermodified strontium barium niobate (SBN) single crystals are reported. Compared with the undoped SBN crystals, the copper-modified crystals have stable hysteresis loops, the spontaneous polarization of which is about 0.30 C/m², but that of the undoped SBN crystals is only about 0.12 C/m². Their coercive field strength is all about 340 V/mm. The experimental results of the infrared spectra show that the infrared reflectivities vary as the orientations of the dipole moments owing to the copper-doping. The c-axis becomes the most stable orientation of the dipole moments, and the polarization will be locked and won't recede if the copper-modified crystals are polarized into monodomains.