Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

This paper numerically explores the possibility of ultrathin layering and high efficiency of graphene as a back surface field (BSF) based on a CdTe solar cell by Personal computer one-dimensional (PC1D) simulation. CdTe solar cells have been characterized and studied by varying the carrier lifetime, doping concentration, thickness, and bandgap of the graphene layer. With simulation results, the highest short-circuit current (I_sc = 2.09 A), power conversion efficiency (η = 15%), and quantum efficiency (QE~85%) were achieved at a carrier lifetime of 1 × 10³ μs and a doping concentration of 1 × 10¹⁷ cm⁻³ of graphene as a BSF layer-based CdTe solar cell. The thickness of the graphene BSF layer (1 μm) was proven the ultrathin, optimal, and obtainable for the fabrication of high-performance CdTe solar cells, confirming the suitability of graphene material as a BSF. This simulation confirmed that a CdTe solar cell with the proposed graphene as the BSF layer might be highly efficient with optimized parameters for fabrication.     

Synthesis and biological evaluation of benzimidazole pendant cyanopyrimidine derivatives as anticancer agents

Thirteen new benzimidazole pendant cyanopyrimidine derivatives were synthesized. The compounds were synthesized through multistep reaction protocol. The structures of synthesized derivatives were studied by EI-MS, ¹H NMR, FT-IR and elemental analysis. All the compounds were studied for their anticancer activity at National Cancer Institute. Except compound 7j , all the compounds unveiled cytotoxicity against cancer cells. The most active compound 7a had shown highest value of growth inhibition of 88.44% and 84.19% against HOP-92 and T-47D cancer cell lines.     

Nano-enabled biosensing systems for intelligent healthcare: towards COVID-19 management

Biosensors are emerging as efficient (sensitive and selective) and affordable analytical diagnostic tools for early-stage disease detection, as required for personalized health wellness management. Low-level detection of a targeted disease biomarker (pM level) has emerged extremely useful to evaluate the progression of disease under therapy. Such collected bioinformatics and its multi-aspects-oriented analytics is in demand to explore the effectiveness of a prescribed treatment, optimize therapy, and correlate biomarker level with disease pathogenesis. Owing to nanotechnology-enabled advancements in sensing unit fabrication, device integration, interfacing, packaging, and sensing performance at point-of-care (POC) has rendered diagnostics according to the requirements of disease management and patient disease profile i.e. in a personalized manner. Efforts are continuously being made to promote the state of art biosensing technology as a next-generation non-invasive disease diagnostics methodology. Keeping this in view, this progressive opinion article describes personalized health care management related analytical tools which can provide access to better health for everyone, with overreaching aim to manage healthy tomorrow timely. Considering accomplishments and predictions, such affordable intelligent diagnostics tools are urgently required to manage COVID-19 pandemic, a life-threatening respiratory infectious disease, where a rapid, selective and sensitive detection of human beta severe acute respiratory system coronavirus (SARS-COoV-2) protein is the key factor.     

Nanoparticle Size‐Fractionation through Self‐Standing Porous Covalent Organic Framework Films

Covalent organic frameworks (COFs) have attracted attention due to their ordered pores leading to important industrial applications like storage and separation. Combined with their modular synthesis and pore engineering, COFs could become ideal candidates for nanoseparations. However, the fabrication of these microcrystalline powders as continuous, crack‐free, robust films remains a challenge. Herein, we report a simple, slow annealing strategy to construct centimeter‐scale COF films ( Tp‐Azo and Tp‐TTA ) with micrometer thickness. The as‐synthesized films are porous (SA_BET=2033 m² g^?1 for Tp‐Azo ) and chemically stable. These COFs have distinct size cut‐offs (ca. 2.7 and ca. 1.6 nm for Tp‐Azo and Tp‐TTA , respectively), which allow the size‐selective separation of gold nanoparticles. Unlike, other conventional membranes, the durable structure of the COF films allow for excellent recyclability (up to 4 consecutive cycles) and easy recovery of the gold nanoparticles from the solution.     

DIC Challenge 2.0: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses

Experimental Mechanics - The DIC Challenge 2.0 follows on from the work accomplished in the first Digital Image Correlation (DIC) Challenge Reu et al. (Experimental Mechanics 58(7):1067, 1). The...     

Evaluation of elastic, elastic-plastic properties of thin Pt wire by?mechanical bending test

A testing methodology to determine the elastic-plastic properties of thin metallic wires is reported. A small-scaled bending test of Pt thin wire and the corresponding finite element analysis are performed. By fitting the load-displacement relationship obtained by finite element analysis to the experimental one, the elastic, elastic-plastic properties of Pt wire are successfully determined.     

Temporal contrast improvement in chirped pulse amplification systems by a four-grating compressor and by spectral modifications

The quest for higher peak focused intensities and better temporal contrast drives one to improve the design of all possible stages of the chirped pulse amplification (CPA) system. In this paper, we have analyzed the role of dispersion and spectral profile on the temporal shape and contrast ratio of the output pulse of a CPA system. The simulations indicate that an initial sech² or a Gaussian pulse in the CPA system is best for a good contrast ratio. Incorporating a four-grating based pulse compressor in the CPA system improves the contrast as well as provides the flexibility to compensate the dispersion upto the fourth order. The simulations also detail the effect of spectral profile tailoring on the contrast ratio and peak power.     

Reactions of dichloro-bis(cyclopentadienyl)titanium(IV) with bidentate Schiff bases

A series of Cp₂Ti(SB)Cl complexes, whereSB is the anion of bidentate Schiff bases derived from salicylaldehyde and different primary aminesviz o-anisidine,m-anisidine,o-phenetidine,o-chloroaniline,m-chloroaniline,m-nitroaniline, α-naphthylamine and benzylamine, have been synthesised by the reaction of dichloro-bis(cyclopentadienyl) titanium(IV), Cp₂TiCl₂, and bidentate Schiff base (sbh) in a 1:1 molar ratio in refluxingthf in the presence of triethylamine. The new derivatives have been characterised on the basis of their elemental analyses, conductance measurements and spectral (IR,¹Hnmr and electronic) studies     

Numerical prediction of recirculation flows with free convection encountered in gas-agitated reactors

Flows in a gas-agitated reactor have been predicted by a finite difference procedure. The free-convection phenomena in the gas-liquid mixtures have been accounted for by the calculation of a void fraction determined from the gas flow rate. Computations have been performed for two different situations: first, with the allowance of slip between gas and liquid phases, and second, without any slip. Reasonable agreement has been achieved between the measurements.