Tetrahedral Co(II) coordination in alpha-type cobalt hydroxide: Rietveld refinement and X-ray absorption spectroscopy

We report a Rietveld refinement analysis and X-ray absorption study on a green-color Cl(-)-intercalated alpha-type cobalt hydroxide phase. The refinement clearly demonstrated that one-fifth to one-sixth of the Co(II) at octahedral sites was replaced by pairs of tetrahedrally coordinated Co(II) on each side of the hydroxide plane, represented by a structural formula of [Co(octa)(0.828)Co(tetra)(0.348)(OH)2](0.348+)Cl(0.348).0.456H2O. X-ray absorption spectroscopy also indicated that the divalent cobalt were in local neighboring environments of both octahedral and tetrahedral coordination. Furthermore, UV-vis spectroscopic measurements elucidate the typical green/blue color of an alpha-type cobalt hydroxide.     

Ability of poly(vinyl alcohol) fibers to initiate graft copolymerization

It was noted in a graft copolymerization reaction involving a system of poly(vinyl alcohol) fibers (PVA fibers), methyl methacrylate, and water that fibers oxidized with hydrogen peroxide or sodium hypochlorite or ferric ion-adsorbing fibers effectively initiate the reaction as in the case of cellulose fibers. The initiation reaction of the sample was markedly activated by the presence of a pretreatment with an oxidizing agent at a concentration on the order of 10^?9 mole/l., but the oxidized samples were sharply deactivated by such means as reduction and oximation. Since model initiators for the present system, such as iron(III) acetylacetonate-adsorbing PVA fibers or ferric ion-adsorbing fibres, with the co-existence of acetylacetone were observed to initiate graft copolymerization effectively, it is believed that carbonyl groups in modified PVA fibers could be a major factor for initiating copolymerization through interaction with metallic ions.     

Biosensor for phenol based on the direct electron transfer blocking of peroxidase immobilising on silica–titanium

Horseradish peroxidase (HRP) was immobilised on silica gel modified with titanium oxide. This material was employed to prepare modified carbon paste electrode. The direct electron transfer of the hydrogen peroxide reduction by HRP was blocked when immobilised on silica–titanium. This biosensor presented a very sensitive response for phenol (1 μmol l⁻¹) at an applied potential of 0 mV vs SCE. The best condition was achieved in phosphate buffer pH 6.8, ratio of hydrogen peroxide/phenol higher than 0.35. The biosensor showed a linear response range between 10 and 50 μmol l⁻¹ of phenol, adjusted by the equation j=−32.8+16.3 [phenol], for n=5 with a correlation coefficient of 0.9995. The response time of the biosensor was about 3 s.     

The influence of polytypic structures on the M011-->M101 solid-solid phase transition of n-C36H74: an application of the oblique infrared transmission method

The molecular displacements on the M011-->M101 phase transition of n-hexatriacontane (n-C36H74) have been investigated with an IR microscope designed for the oblique infrared transmission method. It has been clarified that two polytypic structures of the M011 modification, single-layered structure (Mon) and double-layered one (Orth II), both transform to the M101 modification of single-layered structure with their respective mechanisms. On the M011(Mon)-->M101 transition, the inclination direction of molecular axis is changed by 90 degrees through an intermediate state in which the molecular chain is set perpendicular to the basal plane of the single crystal. On the other hand, a polymorphic-polytypic composite structural change on the M011(Orth II)-->M101 transition is accomplished through two kinds of molecular displacements occurring alternately along the stacking direction of molecular layers.     

Dynamic and subjective responses of seated subjects exposed to simultaneous vertical and fore-and-aft whole-body vibration: The effect of the phase between the two single-axis components

Subjective and dynamic responses of seated subjects exposed to simultaneous vertical and fore-and-aft sinusoidal whole-body vibration were investigated. The effect of the phase difference between the vertical and the fore-and-aft vibration on the responses was of a particular interest in this study. Fifteen subjects were exposed to dual-axis vibrations at six frequencies (2.5-8 Hz) and at eight phases between the two single-axis components (0-315°). The magnitude of vibration in each axis was constant at 0.7 m s⁻² rms. Discomfort caused by vibration was measured by the method of magnitude estimation. The motion of the body were measured at the head and three locations along the spine with accelerometers attached to the body surface. The most significant effect of the phase between the two single-axis components on the discomfort was observed at 5 Hz: about 40% difference in the median discomfort estimate caused by changing the phase. The transmissibilities from vertical seat vibration to vertical motions of the spine varied from 0.5 to 2.0 by changing the phase between the two single-axis components at frequencies from 2.5 to 5 Hz. The effect of the phase observed in the dynamic response was not predicted by the superposition of the responses to each single-axis vibration. The discomfort caused by the dual-axis vibration tended to be correlated better with the combinations of the dynamic responses measured in the two axes than with the dynamic responses in a single axis.     

Total Chemical Synthesis of Biologically Active Fluorescent Dye‐Labeled Ts1 Toxin

Ts1 toxin is a protein found in the venom of the Brazilian scorpion Tityus serrulatus. Ts1 binds to the domain II voltage sensor in the voltage‐gated sodium channel Nav and modifies its voltage dependence. In the work reported here, we established an efficient total chemical synthesis of the Ts1 protein using modern chemical ligation methods and demonstrated that it was fully active in modifying the voltage dependence of the rat skeletal muscle voltage‐gated sodium channel rNav1.4 expressed in oocytes. Total synthesis combined with click chemistry was used to label the Ts1 protein molecule with the fluorescent dyes Alexa‐Fluor 488 and Bodipy. Dye‐labeled Ts1 proteins retained their optical properties and bound to and modified the voltage dependence of the sodium channel Nav. Because of the highly specific binding of Ts1 toxin to Nav, successful chemical synthesis and labeling of Ts1 toxin provides an important tool for biophysical studies, histochemical studies, and opto‐pharmacological studies of the Nav protein.     

Effects of carbonyl and aldehyde groups in the graft copolymerization of methyl methacrylate on cellulose with a ceric salt

Graft copolymerization of methyl methacrylate on cellulosic materials of various carbonyl and aldehyde contents with the use of a ceric salt as an initiator was studied. It was found that the concentration of the ceric salt which gives the maximum per cent grafting is in good agreement with the equivalent of total carbonyl content in the cellulosic material, and the number of grafted chains in copolymers is roughly proportional to it. However, the molar ratio of the number of grafted chains to total carbonyl content is quite small, being approximately 1:50, and the graft copolymerization can be explained kinetically on the assumption that the number of radicals produced on cellulose by the ceric salt leading to branching is very much smaller than the number of radicals destroyed by the ceric salt, and growing radicals can be stabilized by the termination reaction with the ceric salt or with a cellulose radical. Although both aldehyde and carbonyl groups contribute to the formation of grafted chains, the former are effective mainly at low concentrations of the ceric salt; both groups participate in the production of graft copolymers showing the maximum per cent grafting.     

Discussion of substantially identical gel points among multiallyl monomers based on characterization of resultant network polymer precursors consisting of oligomeric primary polymer chains

No difference in the actual gel points was substantially observed among three isomeric diallyl phthalates such as diallyl phthalate (DAP), diallyl isophthalate, and diallyl terephthalate (DAT); this interesting gelation behavior was discussed further in terms of the correlation between gelation and the difference in cyclization modes, and also, the difference in reactivity between the uncyclized and cyclized radicals for cross‐linking. In the present work, we tried to extend the preceding discussion to the polymerization of triallyl trimellitate (TAT) because the molecular structure of TAT is presumed to essentially involve the characteristics of three isomeric diallyl phthalates and, therefore, the enhanced gelation was expected in TAT polymerization. However, no enhancement of gelation was observed. For a full understanding of the gelation in multiallyl cross‐linking polymerization, we explored further the polymerizations of DAP, DAT, and TAT, especially focusing on the characterization of resultant network polymer precursors (NPPs) using SEC‐MALLS‐viscometry providing the correlation of [η] versus M_w of fractionated samples. Notably, the structure of NPP consisting of oligomeric primary polymer chains generated from specific allyl polymerization would become core‐shell type dendritic with the progress of polymerization. The correlation between delayed gelation and decreased reactivity of dendritic NPP for intermolecular cross‐linking is discussed. Conclusively, the reactivity for intermolecular cross‐linking between NPPs decreased with the progress of polymerization leading to a delayed gelation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2871–2881, 2009