Inductively-coupled plasma/atomic emission spectrometry of sulfur with a vacuum scanning spectrometer and its application to the analysis of coal liquefaction catalysts

Inductively-coupled plasma/atomic emission spectrometry with a high-resolution vacuum scanning monochromator is described for the determination of sulfur at 180.734 nm. The behavior of the signal-to-background ratio is investigated as functions of RF power, argon gas flow rate and observation height above the load coil. Under the operating conditions selected, the detection limit is 3 μg l^?1. The Se I 196.090-nm line is chosen as internal standard, because the S/Se line pair exhibited the least change with carrier gas flow rate and acid concentration of solution. Sulfur in NiMo and CoMo/ Al₂O₃ catalysts used for coal liquefaction is determined as S(II) and S(VI) species. The total amount of the species agreed well with the sulfur value obtained by the conventinal combustion method.     

Solvatochromic studies of interactions between surfactants and poly(N-substituted acrylamide)s

Interactions between poly(N-substituted acrylamide)s and surfactants, such as sodium dodecyl sulfate (SDoS) and sodium decyl sulfate (SDeS), in aqueous solutions were investigated using a solvatochromic probe. The polymers used were poly(N,N-dimethylacrylamide) (PDMA), poly(N-isopropylacrylamide) (PIPA), poly(N-acryloylpyrrolidine) (PAPR), and poly(vinylpyrrolidone) (PVPy) for comparison. They were labeled with pyridinium dicyanomethylide chromophore as a solvatochromic probe, and the changes in the microenvironment polarity of the polymer upon association with surfactant micelles were investigated by monitoring the λ_max in the absorption spectra of the probe molecule. It was found that the Gibbs free energy of micelle stabilization by polymer complexation for SDoS is 7.6, 4.1, and 2.2 kJ mol⁻¹, and for SDeS 5.1, 2.9, and 0.8 kJ mol⁻¹ with PIPA, PAPR, and PDMA, respectively. These results indicate that the complexation between polymer and surfactant is influenced not only by the alkyl-chain length of the surfactant, but also by the polymer side groups.     

Determination of thickness, dielectric constant of thiol films, and kinetics of adsorption using surface plasmon resonance

This paper describes the formation of a self-assembled monolayer of 11-mercaptoundecanoic acid (MUA) under different concentrations on a gold sensor disk, monitoring in situ and in real time using surface plasmon resonance spectroscopy (SPR). The film thickness and dielectric constant were determined for a fully formed monolayer using one-color approach SPR. The kinetic studies of the film formation in ethanol solution indicated that the self-assembled monolayer is formed in a two-step adsorption process. In this sense, this unpublished route was applied on the basis of a model where many molecules are adsorbed at an initial step and then can be desorbed and/or rearranged to form a perfect monolayer.     

Diastereoselective inter- and intramolecular pinacol coupling of aldehydes promoted by monomeric titanocene(II) complex Cp(2)TiPh

A monomeric titanocene(III) derivative, Cp(2)TiPh, effectively promoted the pinacol coupling of both an aromatic aldehyde, benzaldehyde, and an aliphatic aldehyde, 3-phenylpropionaldehyde. The same reactive complex was successfully generated by a catalytic amount of a precursor, Cp(2)Ti(Ph)Cl, and its stoichiometric amount of Zn. The Cp(2)TiPh-catalyzed pinacol coupling of benzaldehyde derivatives and aliphatic aldehydes afforded the corresponding 1,2-diols in high yields with moderate to good threo-selectivity. On the other hand, Cp(2)TiPh-catalyzed pinacol cyclization of dials gave cyclic 1,2-diols with excellent diastereoselectivity. The extension of this protocol to chiral dials demonstrated that the phenyltitanium complex catalytically transmitted an axial chirality or a central chirality of the starting dials to the central chirality of the resultant 1,2-diols.     

Structures of Ganoderic Acid A and B,Two New Lanostane Type Bitter Triterpenes from Ganoderma lucidum (FR.) KARST.

The structures of two new bitter triterpenes, ganoderic acid A and B. isolated from a mushroom Ganoderma lucidum (FR.) Karst. (Polyporaceae) were determined as 1 and 2 on the basis of spectral data. Ganoderic acid A is a novel highly oxidized triterpene bearing a boat-shaped A-ring of lanostane.     

Effect of monomer concentration on characteristics of methacrylic acid-grafted polyethylene film prepared by photografting

The effect of monomer concentration on photografting of methacrylic acid (MAA) onto linear low-density polyethylene (PE) film (thickness=30 μm) was investigated at 60 °C in water solvent together with the location of MAA-grafted chains. Xanthone was used as a photoinitiator which was coated on the film sample earlier. The higher percentage of grafting and graft efficiency were afforded for the system with the higher monomer concentration. The resultant MAA-grafted films were subjected to measurements of pH-responsive character and ability to adsorb cupric ion in order to understand the characteristics of function introduced. The grafted samples exhibited the pH-responsive character, where they shrank and swelled in acidic and alkaline media, respectively. The pH-responsive character of the grafted films was higher for the samples prepared in the system with a higher monomer concentration. Moreover, the grafted samples exhibited the ability to adsorb cupric ion, and the ability was reduced when the sample was prepared in the system with a higher monomer concentration. The different extents of the pH-responsive character and ability to adsorb cupric ion of the resulting grafted PE films were discussed in terms of location of grafted chains in the film substrate, which was determined by a scanning electron microscope and an attenuated total reflection infrared spectroscopy.     

Absolute stereochemistry of amphidinolide C

[structure in text] The absolute configurations at 12 chiral centers in amphidinolide C (1), a potent cytotoxic 25-membered macrolide isolated from a marine dinoflagellate Amphidinium sp., were determined to be 3S, 4R, 6R, 7R, 8R, 12R, 13S, 16S, 20R, 23R, 24R, and 29S by combination of NMR analyses, degradation experiments, and synthesis of the C-1-C-7 segment.     

Photodegradation of polyethylene in the presence of ferric salt: Influence of ferric acetylacetonate on model compounds

The influence of ferric acetylacetonate [Fe(acac)₃] on the photodegradation of model compounds of polyethylene (PE) was examined. By studying electron-spin-resonance (ESR) spectra of photoirradiated compounds such as 1-octene and 1,7-octadiene, which contain carbon double bonds, Fe(acac)₃ was found to accelerate the formation of allyl radical by contact with them. On the other hand, Fe(acac)₃ suppressed the radical formation based on Norrish type I reaction in a carbonyl group of compounds such as 2-octanone and 3-octanone. Based on the study of ultraviolet (UV) spectra as well as ESR spectra on photoirradiated samples, the influence of Fe(acac)₃ on the photodecomposition of model compounds of PE was discussed. Finally, the discussion turned to the mechanism of photodecomposition of PE in the presence of ferric salt.     

Guest shape-responsive fitting of porous coordination polymer with shrinkable framework

In situ synchrotron X-ray powder diffraction patterns of porous coordination polymers [[Cu(2)(pzdc)(2)(bpy)].G] have been measured (pzdc = pyrazine-2,3-dicarboxylate, bpy = 4,4'-bipyridine) (where G = H(2)O for CPL-2 superset H(2)()O, G = benzene for CPL-2 superset benzene, and G = void for the apohost). The structures of apohost and CPL-2 superset benzene were determined from Rietveld analysis. Adsorption of benzene in the channels induced a remarkable contraction in the crystal (b axis; 6.8%, volume; 4.9%), although the channels were occupied by the benzene molecules. This crystal transformation provides a new pore structure that is well suited for benzene molecules, and we denote it as a "shape-responsive fitting" transformation. This type of pore gives rise to a new guideline: frameworks can be composed of flexible motifs that are linked via strong bond and/or stiff motifs that are connected via weaker bonds.