Determination of the scattering coefficient of biological tissue considering the wavelength and absorption dependence of the anisotropy factor

The anisotropy factor g, one of the optical properties of biological tissues, has a strong influence on the calculation of the scattering coefficient μ _s in inverse Monte Carlo (iMC) simulations. It has been reported that g has the wavelength and absorption dependence; however, few attempts have been made to calculate μ _s using g values by taking the wavelength and absorption dependence into account. In this study, the angular distributions of scattered light for biological tissue phantoms containing hemoglobin as a light absorber were measured by a goniometric optical setup at strongly (405 nm) and weakly (664 nm) absorbing wavelengths to obtain g. Subsequently, the optical properties were calculated with the measured values of g by integrating sphere measurements and an iMC simulation, and compared with the results obtained with a conventional g value of 0.9. The μ _s values with measured g were overestimated at the strongly absorbing wavelength, but underestimated at the weakly absorbing wavelength if 0.9 was used in the iMC simulation.     

Perfectly conducting channel and universality crossover in disordered graphene nanoribbons

The band structure of graphene ribbons with zigzag edges have two valleys well separated in momentum space, related to the two Dirac points of the graphene spectrum. The propagating modes in each valley contain a single chiral mode originating from a partially flat band at the band center. This feature gives rise to a perfectly conducting channel in the disordered system, if the impurity scattering does not connect the two valleys, i.e., for long-range impurity potentials. Ribbons with short-range impurity potentials, however, through intervalley scattering display ordinary localization behavior. The two regimes belong to different universality classes: unitary for long-range impurities and orthogonal for short-range impurities.     

High Diastereoselection of a Dissymmetric Capsule by Chiral Guest Complexation

Encapsulation of chiral guests in the dissymmetric capsule 1?4 BF₄ formed diastereomeric supramolecular complexes G ? 1?4 BF₄ ( G : guest). When chiral guests 2 a – q were encapsulated within the dissymmetric space of the self‐assembled capsule 1?4 BF₄, circular dichroism (CD) was observed at the absorption bands that are characteristic of the π–π* transition of the bipyridine moiety of the capsule, which suggests that the P and M helicities of the capsule are biased by the chiral guest complexation. The P helicity of diastereomeric complex (S)‐ 2 l ? 1?4 BF₄ was determined to be predominant, based on CD exciton coupling theory and DFT calculations. The diastereoselectivity was highly influenced by the ester substituents, such that benzyl ester moieties were good for improving the diastereoselectivity. A diastereomeric excess of 98 % was achieved upon the complexation of 2 j . The relative enthalpic and entropic components for the distereoselectivity were obtained from a van’t Hoff plot. The enthalpic components were linearly correlated with the substituent Hammett parameters (σ_p⁺). The electron‐rich benzyl ester moieties generated donor–acceptor π–π stacking interactions with the bipyridine moiety, which resulted in a significant difference in energy between the predominant and subordinate diastereomeric complexes.     

pH-responsive non-surface-active/surface-active transition of weakly ionic amphiphilic diblock copolymers

The weakly ionic amphiphilic diblock copolymer polystyrene-b-poly(acrylic acid) was synthesized by nitroxy radical-mediated living radical polymerization with precise control of block length, block ratio, and polydispersity. Systematical surface tension experiments and foam formation observations revealed that this polymer was non-surface active under neutral and alkaline (pH 10) conditions, while it was surface active under an acidic condition (pH 3). This result supports our proposed origin of non-surface activity; the image charge repulsion at the air/water interface is essential in addition to very stable micelle formation in the bulk solution. At a higher pH (pH 12), the polymer showed slight surface activity since the added NaOH played a role as an added salt. The critical micelle concentration (cmc) was estimated by static light scattering. Cmc increased with increasing added salt (NaCl) concentration as was observed for other strongly ionic non-surface-active polymers. Hence, this trend is characteristic for non-surface-active polymers. The pH dependence of cmc was minimum at pH 8–10. Since the acrylic acid block is fully ionized under this condition, the strong image charge repulsion at this condition accelerated micelle formation at a low polymer concentration, which consequently decreased cmc. Micelles in bulk solution were confirmed by dynamic light scattering, and the salt concentration and pH dependencies of the hydrodynamic radius of the micelles were also estimated. The pH-responsive non-surface-active/surface-active transition observed in this study strongly supports the fact that the image charge repulsion is an essential factor for non-surface activity in addition to stable micelle formation in solution.     

Mechanical and tribological properties of DLC coatings deposited by plasma-based ion implantation and deposition method on polyoxymethylene

Polyoxymethylene (POM, polyacetal) is one of the most popular plastics for machine elements, especially in Japan. However, it is difficult to use it under severe operating conditions such as high speed and high contact pressure. Diamond-like carbon (DLC) coatings were well known to be tribological and functional coatings. However, both POM and DLC coatings are difficult to adhere them each other. In the present paper, DLC coatings are deposited by plasma-based ion implantation and deposition (PBIID) method on POM substrate, and validity of DLC coatings on POM was investigated through friction and mechanical tests. When gas pressure was 0.2 and 0.8 Pa, hardness and adhesion properties of DLC coating deposited under gas pressure of 0.5 Pa were lower compared with under 0.2 and 0.8 Pa. For preparing DLC coatings having hard and good adhesion properties, relatively thin substrate was suitable. A correlation between relative humidity in the laboratory and friction coefficient was confirmed while DLC coatings remain on the substrate.     

Mechanochromic Delayed Fluorescence Switching in Propeller‐Shaped Carbazole–Isophthalonitrile Luminogens with Stimuli‐Responsive Intramolecular Charge‐Transfer Excited States

Herein, the universal design of high‐efficiency stimuli‐responsive luminous materials endowed with mechanochromic luminescence (MCL) and thermally activated delayed fluorescence (TADF) functions is reported. The origin of the unique stimuli‐triggered TADF switching for a series of carbazole–isophthalonitrile‐based donor–acceptor (D–A) luminogens is demonstrated based on systematic photophysical and X‐ray analysis, coupled with theoretical calculations. It was revealed that a tiny alteration of the intramolecular D–A twisting in the excited‐state structures governed by the solid morphologies is responsible for this dynamic TADF switching behavior. This concept is applicable to the fabrication of bicolor emissive organic light‐emitting diodes using a single TADF emitter.     

Quiescent hydrothermal synthesis of reduced graphene oxide–periodic mesoporous silica sandwich nanocomposites with perpendicular mesochannel alignments

Quiescent hydrothermal conditions were applied to synthesis of the sandwich nanocomposites of reduced graphite oxide (rGO) and periodic mesoporous silica (PMS) with vertically aligned mesochannels. It was found that the formation of the PMS–rGO–PMS sandwich structure is very sensitive to the surface and synthesis conditions. Although a higher temperature hydrothermal condition promotes reduction of GO and formation of bulky mesoporous nanoparticles, quiescent hydrothermal condition can serve as an alternative approach to obtain the unusual nanocomposites and slightly promote the structural stability of PMS on the surface of rGO.     

The effect of various calcination treatments on the photocatalytic activity of a rod-type TiO<Subscript>2</Subscript> electrode for oxidation of ethanethiol

It was found that the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes were affected by various post-calcination treatments, for example, calcination in NH₃ or under vacuum. Post-calcination treatment in NH₃ at 773 K was particularly effective in increasing the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes. A unique photoelectrochemical circuit was constructed by connecting a rod-type TiO₂ electrode to a Pt electrode through a silicon solar cell in which the negative bias was applied on the rod-type TiO₂ electrode. It was found that the photoelectrochemical circuit can effectively oxidize ethanethiol in water into CO₂.     

Quantitative analysis of inhomogeneous luminance effect on visibility of text

In the present study, we measured the visibility of several types of Japanese text on a liquid crystal display (LCD) with a spatially inhomogeneous luminance and extended the visibility index function (VIF) to explain the current experimental results with a higher degree of accuracy. We quantitatively analyzed the effect of an inhomogeneous luminance, which was produced by the graphical representation of a background without reflected light and by reflected light on a homogeneous background. These results showed that the visibility of text was influenced by the inhomogeneity of the background luminance in a domain that depended on text size. Then we applied a weighted average background luminance with a two dimensional Gaussian function, whose distribution width was related to the text size, to VIF. Finally, we proposed a modified VIF and showed that the new method was able to precisely estimate the actual visibility of text with an inhomogeneous luminance.     

Optical simulation of reduced retinal illuminance caused by senile miosis

In order to simulate elderly vision for young observers, we developed an optical goggle using filters whose transmittance optically simulates the senile miosis: reduction in retinal illuminance as a function of ambient illuminance. First, we measured the pupil size of young and elderly subjects (mean age were 21.8 and 67.1 years, respectively) under six illuminance conditions (from 0.03 to 4850 lx), and formulated the relationship between illuminance and pupillary area functions in both age groups. Next, the transmittance formulae for the filter simulating the senile miosis were derived based on the properties of the pupillary area and visual functions of the elderly and the young subjects including the effect of mydriasis induced by the reduction of light due to the filter in young observers. Finally, we developed a goggle-type simulator using active optical devices which enables young people to experience senile miosis in any environment in real time.