A total synthesis of spiruchostatin A

We achieved the total synthesis of the histone deacetylase inhibitor spiruchostatin A, as the prelude to the preparation of a combinatorial library of its analogues. Two key reactions were an asymmetric acetate aldol reaction using a Zr-enolate and macrolactonization using the Shiina method.     

Changes in the fluorescence spectrum of individual single-wall carbon nanotubes induced by light-assisted oxidation with hydroperoxide

Through fluorescence-spectrum measurements, we investigated the effects of light-assisted oxidation with H2O2 (LAOx) on single-wall carbon nanotubes (SWNTs) that were individually dispersed in an aqueous solution of surfactant. The intensities of the fluorescence spectra were decreased remarkably by the LAOx when the light's wavelength was 400-500 nm and a little when 600-700 nm. The spectrum intensity did not recover even when the pH was restored to an original value of 6.5. The spectra changed little when the LAOx wavelength was 500-600 nm or the light was not irradiated. In addition, the effect of LAOx on SWNTs was related to the diameters of SWNTs. We inferred that these phenomena reflected that H2O2 was dissociated by absorbing the fluorescence light emitted from optically excited SWNTs, which, in turn, accelerated the burning out of SWNTs.     

Ring-opening polymerization of α,β-disubstituted oxiranes by α-methoxyphenylmethylium hexachloroantimonate

α-Methoxyphenylmethylium hexachloroantimonate was used as a novel initiator for the polymerization of α,β-disubstituted oxiranes such as cyclohexene oxide (CHO) and 2-butene oxide (trans and cis) (2-BO) at ?78°C with dichloromethane or dichloromethane-toluene mixtures as solvents. The CHO polymerization mixture became turbid and the polymer precipitated in dichloromethane. The CHO polymerization proceed quantitatively in dichloromethane–toluene mixtures. The molecular weight distribution of polyCHO obtained was bimodal regardless of the solvent used. The polymerization of trans-2-BO was heterogeneous in both dichloromethane and dichloromethane–toluene mixture. The polymerization mixtures of cis-2-BO were transparent but reached a limit yield which was less than the polymer yield of trans-2-BO. Furthermore, the microstructure of the poly2-BOs were analyzed by Vandenberg's method and the results confirmed Vandenberg's finding that inversion of configuration occurs in the propagation step.     

Photo-switchable spin-crossover iron(III) compound based on intermolecular interactions

Iron(III) spin-crossover compounds, [Fe(qnal)₂]CF₃SO₃·MeOH (1·MeOH) and [Fe(qnal)₂]CF₃SO₃·acetone (1·acetone) were prepared and their spin transition properties were characterized by magnetic susceptibility measurement, Mössbauer spectroscopy and single crystal analysis. Two iron(III) compounds exhibited abrupt spin transition with thermal hysteresis loop (T _1/2?? = 115 K and T _1/2?? = 104 K for 1·MeOH, and T _1/2?? = 133 K and T _1/2?? = 130 K for 1·acetone). Single crystal analysis revealed both of the structures in high-spin (HS) and low-spin (LS) states for 1·acetone. The difference of bond length between the HS and LS states for 1·acetone was ~0.10 Å, which was corresponding to that of typical iron(III) SCO compounds. Specially, it showed strong intermolecular interactions by ???C?? stacking formed between the neighbor complexes leading to 2-D sheet. Both 1·MeOH and 1·acetone exhibited LIESST effect when it was illuminated at 1000 nm. We also confirmed that the introduction of strong intermolecular interactions, such as ???C?? stacking, can play an important role in LIESST effect.     

Enantioenriched synthesis of cyclopropenes with a quaternary stereocenter, versatile building blocks

Ir(salen) complexes were found to catalyze enantioselective cyclopropenation efficiently. Cyclopropenation can be carried out using either a donor/acceptor- or an acceptor/acceptor-substituted diazo compound such as α-aryl-α-diazoacetates, α-phenyl-α-diazophosphonate, 2,2,2-trifluoro-1-phenyl-1-diazoethane, and α-cyano-α-diazoacetamide as carbenoid precursors. The reactions provide highly enantioenriched cyclopropenes (84-98% ee) with a functionalized quaternary carbon as versatile building blocks.     

Direct measurement of interactions between stimulation-responsive drug delivery vehicles and artificial mucin layers by colloid probe atomic force microscopy

A novel thermo- and pH-sensitive nanogel particle, which is a core-shell structured particle with a poly(N-isopropylacrylamide) (p(NIPAAm)) hydrogel core and a poly(ethylene glycol) monomethacrylate grafted poly(methacrylic acid) (p(MMA-g-EG)) shell, is of interest as a vehicle for the controlled release of peptide drugs. The interactions between such nanogel particles and artificial mucin layers during both approach and separation were successfully measured by using colloid probe atomic force microscopy (AFM) under various compression forces, scan velocities, and pH values. While the magnitudes of the compression forces and scan velocities did not affect the interactions during the approach process, the adhesive force during the separation process increased with these parameters. The pH values significantly influenced the interactions between the nanogel particles and a mucin layer. A large steric repulsive force and a long-range adhesive force were measured at neutral pH due to the swollen p(MMA-g-EG) shell. On the other hand, at low pH values, the steric repulsive force disappeared and a short-range adhesive force was detected, which resulted from the collapse of the shell layer. The nanogel particles possessed a pH response that was sufficient to protect the incorporated peptide drug under the harsh acidic conditions in the stomach and to effectively adhere to the mucin layer of the small intestine, where the pH is neutral. The relationships among the nanogel particle-mucin layer interactions, pH conditions, scan velocities, and compression forces were systemically investigated and discussed.     

1D and 2D assembly structures by imidazole···chloride hydrogen bonds of iron(II) complexes [Fe(II)(HL(n-Pr))3]Cl·Y (HL(n-Pr) = 2-methylimidazol-4-yl-methylideneamino-n-propyl; Y = AsF6, BF4) and their spin states

Two Fe(II) complexes fac-[Fe(II)(HL(n-Pr))(3)]Cl·Y (Y = AsF(6) (1) and BF(4) (2)) were synthesized, where HL(n-Pr) is 2-methylimidazole-4-yl-methylideneamino-n-propyl. Each complex-cation has the same octahedral N(6) geometry coordinated by three bidentate ligands and assumes facial-isomerism, fac-[Fe(II)(HL(n-Pr))(3)](2+) with Δ- and Λ-enantiomorphs. Three imidazole groups per Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) are hydrogen-bonded to three Cl(-) ions or, from the viewpoint of the Cl(-) ion, one Cl(-) ion is hydrogen-bonded to three neighbouring fac-[Fe(II)(HL(n-Pr))(3)](2+) cations. The 3?:?3 NH···Cl(-) hydrogen bonds between Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) and Cl(-) generate two kinds of assembly structures. The directions of the 3?:?3 NH···Cl(-) hydrogen bonds and hence the resulting assembly structures are determined by the size of the anion Y, though Y is not involved into the network structure and just accommodated in the cavity. Compound 1 has a 1D ladder structure giving a larger cavity, in which the Δ- and Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) enantiomorphs are bridged by two NH···Cl(-) hydrogen bonds. Compound 2 has a 2D network structure with a net unit of a cyclic trimer of {fac-[Fe(II)(HL(n-Pr))(3)](2+)···Cl(-)}(3) giving a smaller cavity, in which Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) species with the same chirality are linked by NH···Cl(-) hydrogen bonds to give a homochiral 2D network structure. Magnetic susceptibility and M?ssbauer spectral measurements demonstrated that compound 1 showed an abrupt one-step spin crossover with 4.0 K thermal hysteresis of T(c↓) = 125.5 K and T(c↑) = 129.5 K and compound 2 showed no spin transition and stayed in the high-spin state over the 5-300 K temperature range.     

Poly‐ε‐Lysine Modified Nanocarbon Film Electrodes for LPS Detection

We developed an electrochemical system for detecting lipopolysaccharide (LPS) that uses an ultraflat nanocarbon film electrode modified with poly‐ε‐lysine with a high affinity to LPS. LPS was captured on the modified electrode, and then ferrocene labeled polymyxin B (FcPMB) was captured on the LPS adsorbed electrode via the LPS‐PMB affinity interaction. The adsorbed FcPMB provided an amplified response with Fe²⁺ ions, and the current response was dependent on the amount of captured LPS (LOD=2.0 ng/mL). This was due to the efficient accumulation of the obtained current for LPS and the very low noise made possible by the ultraflat surface.