Electroanalytical Determination of Cadmium(II) and Lead(II) Using an Antimony Nanoparticle Modified Boron‐Doped Diamond Electrode

We report the simultaneous electroanalytical determination of Pb²⁺ and Cd²⁺ by linear sweep anodic stripping voltammetry (LSASV) using an antimony nanoparticle modified boron doped diamond (Sb‐BDD) electrode. Sb deposition was performed in situ with the analytes, from a solution of 1 mg L^?1 SbCl₃ in 0.1 M HCl (pH 1). Pb²⁺ inhibited the detection of Cd²⁺ during simultaneous additions at the bare BDD electrode, whereas in the presence of antimony, both peaks were readily discernable and quantifiable over the linear range 50–500 μg L^?1.     

Photoelectron spectra of some antibiotic building blocks: 2-azetidinone and thiazolidine-carboxylic Acid

X-ray photoelectron spectra of the core and valence levels of the fundamental building blocks of β-lactam antibiotics have been investigated and compared with theoretical calculations. The spectra of the compounds 2-azetidinone and the 2- and 4-isomers of thiazolidine-carboxylic acid are interpreted in the light of theoretical calculations. The spectra of the two isomers of thiazolidine-carboxylic acid are rather similar, as expected, but show clear effects due to isomerization. Both isomers are analogues of proline, which is well-known to populate several low energy conformers in the gas phase. We have investigated the low energy conformers of thiazolidine-4-carboxylic acid theoretically in more detail and find some spectroscopic evidence that multiple conformers may be present. The measured valence levels are assigned for all three compounds, and the character of the frontier orbitals is identified and analyzed.     

Platinum(IV)-mediated nitrile-sulfimide coupling: a route to heterodiazadienes

Pt(IV)-mediated addition of the sulfimide Ph2S = NH and the mixed sulfide/sulfimides o- and p-[PhS(=NH)](PhS)-C6H4 by the S=NH group to the metal-bound nitriles in the platinum(IV) complexes [PtCl4(RCN)2] proceeds smoothly at room temperature in CH2Cl2 and results in the formation of the heterodiazadiene compounds [PtCl4[NH=C(R)N=SR'Ph]2] (R' = Ph, R = Me, Et, CH2Ph, Ph; R' = o- and p-(PhS)C6H4; R = Et). While trans-[PtCl4(RCN)2] (R = Et, CH2Ph, Ph) reacting with Ph2S=NH leads exclusively to trans-[PtCl4[NH=C(R)N=SPh2]2], cis/trans-[PtCl4(MeCN)2] leads to cis/trans mixtures of [PtCl4[NH=C(Me)N=SPh2]2] and the latter have been separated by column chromatography. Theoretical calculations at both HF/HF and MP2//HF levels for the cis and trans isomers of [PtCl4[NH=C(Me)N=SMe2]2] indicate a higher stability for the latter. Compounds trans-[PtCl4[E-NH=C(R)N=SPh2]2] (R = Me, Et) and cis-[PtCl4[E-NH=C(Me)N=SPh2][Z-NH=C(Me)N=SPh2]] have been characterized by X-ray crystallography. The complexes [PtCl4[NH=C(R)N=SPh2]2] undergo hydrolysis when treated with HCl in nondried CH2Cl2 to achieve the amidines [PtCl4[NH=C(NH2)R]2] the compound with R = Et has been structurally characterized) and Ph2SO. The heterodiazadiene ligands, formed upon Pt(IV)-mediated RCN/sulfimide coupling, can be liberated from their platinum(IV) complexes [PtCl4[NH=C(R)N=SR'Ph]2] by reaction with Ph2PCH2CH2PPh2 (dppe) giving free NH=C(R)=SR'Ph and the dppe oxides, which constitutes a novel route for such rare types of heterodiazadienes whose number has also been extended. The hybrid sulfide/sulfimide species o- and p-[PhS(=NH)](PhS)C6H4 also react with the Pt(II) nitrile complex [PtCl2(MeCN)2] but the coupling--in contrast to the Pt(IV) species--gives the chelates [PtCl2[M-I=C(Me)N=S(Ph)C6H4SPh]]. The X-ray crystal structure of [PtCl2[M-I=C(Me)N=S(Ph)C6H4SPh-o]] reveals the bond parameters within the metallacycle and shows an unusual close interaction of the sulfide sulfur atom with the platinum.     

Pinosylvin‐Based Polymers: Biodegradable Poly(Anhydride‐Esters) for Extended Release of Antibacterial Pinosylvin

Pinosylvin is a natural stilbenoid known to exhibit antibacterial bioactivity against foodborne bacteria. In this work, pinosylvin is chemically incorporated into a poly(anhydride‐ester) (PAE) backbone via melt‐condensation polymerization, and characterized with respect to its physicochemical and thermal properties. In vitro release studies demonstrate that pinosylvin‐based PAEs hydrolytically degrade over 40 d to release pinosylvin. Pseudo‐first order kinetic experiments on model compounds, butyric anhydride and 3‐butylstilbene ester, indicate that the anhydride linkages hydrolyze first, followed by the ester bonds to ultimately release pinosylvin. An antibacterial assay shows that the released pinosylvin exhibit bioactivity, while in vitro cytocompatibility studies demonstrate that the polymer is noncytotoxic toward fibroblasts. These preliminary findings suggest that the pinosylvin‐based PAEs can serve as food preservatives in food packaging materials by safely providing antibacterial bioactivity over extended time periods.

     

Determination of capsaicinoids in salsa by liquid chromatography and enzyme immunoassay

Two simple and rapid methods were developed to monitor pungency of salsa in production. Capsaicin (C) and dihydrocapsaicin (DHC) were quantitated in 17 commercially available tomato-based salsas by enzyme immunoassay (EIA) and liquid chromatography (LC) with fluorescent detection. Samples were extracted with methanol and the extracts were subjected to solid-phase extraction (SPE) using polystyrene-divinylbenzene columns. Analysis of SPE eluates showed good correlation (r2 = 0.953) between LC and EIA, with a slightly high bias for EIA. Salsa fortified with C and DHC from 0.118 to 103.2 microg/g resulted in recoveries of 90-112% (C) and 76-97% (DHC). Limits of detection by LC were 0.1 microg/g for each capsaicinoid and 0.1 microg/g by EIA for total capsaicinoids. The LC on-column response was linear from 0.2 to 100 ng for both C and DHC, whereas the working range for EIA was 0.1-2.0 ppm. Pungency varied between different salsa brands labeled mild, medium, and hot.     

The application of diethylaminosulfur trifluoride in the synthesis of fluorinated sterols and bile acids

Methyl 3,3-(ethylenedioxy)-6β-fluoro-5β-cholan-24-oate has been prepared starting from hyodeoxycholic acid and 3,3-(ethylenedioxy)-7( and β)-fluorocholestan-22-al starting from stigmasterol, using diethylaminosulfur trifluoride as the fluorinating agent. These molecules will be used to synthesize analogs of the aminosterol antibiotic squalamine.     

Qualitative supercritical fluid extraction coupled to capillary gas chromatography

The usefulness and ease of utilizing supercritical fluid extraction (SFE) directly coupled to capillary gas chromatography (GC) as quantitative or qualitative analytical problem-solving tools will be demonstrated. As an alternative to conventional liquid solvent extractions, SFE presents itself as a means to achieve high extraction efficiencies of different compounds in complex solid matrices in very rapid tims frames. Moreover, SFE has an additional advantage of being able to achieve distinct extraction selectivities as a function of the solubilizing power of the supercritical fluid extracting phase. For on-line SFE/GC, the extraction effluent is directly transferred to the analytical chromatograph. On-line SFE/GC involves the decompression of pressurized extraction effluent directly into a heated, unmodified capillary split injection port of the GC. In this respect, SFE introduction into GC can be used as an alternative means of GC injection, comparable to such modes of injection as pyrolysis and thermal desorption. This paper will show applications of SFE/GC where mass spectrometric detection together with flame ionization detection was used for component identification from environmental, tobacco, and petroleum matrices.     

A photoelectron spectroscopy study of ultra-thin epitaxial alumina layers grown on Cu(111) surface

Thin epitaxial alumina layers were grown on the Cu(111) surface using simultaneous aluminum deposition and oxygen exposure. Different substrate temperatures during the deposition resulted in layers with different thicknesses, growth rates, crystallinity and epitaxy. Low energy electron diffraction measurements confirmed the epitaxial growth for substrate temperatures above 870 K. The Al 2p doublet was studied by means of photoelectron spectroscopy in order to determine the alumina termination at the metal-oxide interface. A strong dependence on the preparation temperature was found and both aluminum and oxygen terminated interfaces were created.     

Atomic force microscopic studies of novel arborescent block and linear triblock polystyrene-polyisobutylene copolymers

This paper reports the investigation of the nanostructured surface morphology of novel arborescent polyisobutylene-block-polystyrene (PIB-PS) copolymers, in comparison with linear PS-PIB-PS triblock copolymers, using atomic force microscopy (AFM) in tapping mode. Arborescent PIB-PS samples displayed interesting new phase morphologies, which changed dramatically upon annealing but remained irregular. Linear PS-PIB-PS samples showed morphologies similar to those previously found by transmission electron microscopy (TEM) in cryomicrotomed bulk samples, ranging from spherical/cylindrical to lamellar nanometer-sized discreet PS phases dispersed in a continuous PIB matrix. Annealing the samples resulted in more ordered structures.Three-dimensional AFM image and section analysis indicated a height difference between PIB and PS in the block copolymers, which became more prominent during annealing. This feature was verified on compression moulded and protein coated samples. The arborescent PIB-PS materials displayed thermoplastic elastomeric behaviour with a tensile strength between 7 and 10 MPa and elongation ranging from 1000% to 1830%. In comparison, linear triblock samples had a tensile strength between 7 and 20 MPa and elongation ranging from 380% to 640%. Block copolymers with irregular elastomeric midsegments may emerge as a new class of TPEs.