Complexes of Zn(2+), Cd(2+), and Hg(2+) with 2-(alpha-Hydroxybenzyl)thiamine Monophosphate Chloride

The binding sites of Zn(2+), Cd(2+), and Hg(2+) in complexes with 2-(alpha-hydroxybenzyl)thiamine monophosphate chloride, (LH)(+)Cl(-), have been investigated in the solid state [2-(alpha-hydroxybenzyl)thiamin monophosphate chloride monoprotonated at the phosphate group and protonated at N(1)' is denoted as (LH)(+)Cl(-); therefore, the ligand monoprotonated at the phosphate group and deprotonated at N(1)' is L]. Complexes of formulae MLCl(2), M(LH)Cl(3), and (MCl(4))(2)(-)(LH)(2)(+) (M = Zn(2+), Cd(2+), and Hg(2+)) were isolated in aqueous and methanolic solutions, depending on pH. The crystal structure of the complex of formula HgL(2)Cl(2) was solved, together with that of the free ligand (LH)(+)Cl(-), by X-ray crystallography. HgL(2)Cl(2) crystallizes in C2/c, with a = 32.968(6) ?, b = 7.477(2) ?, c = 21.471(4) ?, beta = 118.19(1) degrees, V = 4665(2) ?(3), and Z = 4. (LH)(+)Cl(-) crystallizes in Cc, with a = 10.951(3) ?, b = 17.579(4) ?, c = 13.373(3) ?, beta = 105.36(2) degrees, V = 2482.4(10) ?(3), and Z = 4. Mercury(II) binds to the N(1') of the pyrimidine ring. Both ligands are in the S conformation [Phi(T) = -98.1(9) degrees and Phi(P) = 176.1(10) degrees for HgL(2)Cl(2) and Phi(T) = 104.1(5) degrees and Phi(P) = 171.9(6) degrees for (LH)(+)Cl(-)]. (31)P and (13)C NMR spectra, together with vibrational spectra (IR/Raman), are used to deduce the binding sites of the metal and the protonation states of the ligand at various pH values. It is found that solid-state (31)P NMR spectroscopy is particularly useful in characterizing these complexes as the (31)P shielding tensors are sensitive to the state of the phosphate group. On the other hand, the (31)P NMR spectra indicate that direct bonding between Zn(2+) and Cd(2+) to the phosphate can occur under certain preparation conditions. Solid-state (13)C NMR and vibrational (IR/Raman) spectroscopic results are also in agreement with the other techniques.     

Soluble Polystyrenes Functionalized by Triorgano[(1‐oxoalkyl)oxy]stannanes (=Triorganotin Carboxylates): Synthesis,Structure, and Anion‐Recognition Characteristics

Polystyrene copolymers of the type ( P −H)_1−x( P −(CH₂)_n−COOSnR₃)_x containing [(1‐oxoalkyl)oxy]triphenylstannane or tributyl[(1‐oxoalkyl)oxy]stannanes as side chains ( P −H=styrene; P −(CH₂)_n−COOSnR₃ =para‐substituted styrene‐like monomeric unit with R=Ph (x=0.1), Bu (x=0.5); n=2–4) were investigated. The tributyl[(1‐oxoalkyl)oxy]stannane copolymer was prepared by direct conversion of the corresponding copolymeric methyl esters with hexabutyldistannoxane. By contrast, the [(1‐oxoalkyl)oxy]triphenylstannane copolymer could be prepared only by a procedure involving two reaction steps consisting of a preliminary hydrolysis of the related methyl ester ( P −H)_1‐x( P −(CH₂)_n−COOMe)_x followed by functionalization of the corresponding poly(carboxylic acid) ( P −H)_1‐x( P −(CH_2n−COOH)_x with hydroxytriphenylstannane. Attempts to directly convert the methyl ester with hydroxytriphenylstannane or hexaphenyldistannoxane led to the formation of uncompletely functionalized product. The structure of the stannane‐functionalized polymers was investigated in solution and solid state by NMR, IR, and thermal analysis. The tributylstannane and triphenylstannane copolymers were assessed as chloride‐selective anion carriers in polymeric‐liquid‐membrane potentiometric ion‐selective electrodes.     

Biomarkers of Aspergillus spores: Strain typing and protein identification

We applied both matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometric and 1D sodium dodecylsulfate polyacrylamide gel electrophoretic (1D-PAGE) approaches for direct analysis of intact fungal spores of twenty four Aspergillus species. In parallel, we optimized various protocols for protein extraction from Aspergillus spores using acidic conditions, step organic gradient and variable sonication treatment. The MALDI-TOF mass spectra obtained from optimally prepared samples provided a reproducible fingerprint demonstrating the capability of the MALDI-TOF approach to type and characterize different fungal strains within the Aspergillus genus. Mass spectra of intact fungal spores provided signals mostly below 20 kDa. The minimum material amount represented 0.3 μg (10,000 spores). Proteins with higher molecular weight were detected by 1D-PAGE. Eleven proteins were identified from three selected strains in the range 5–25 kDa by the proteomic approach. Hemolysin and hydrophobin have the highest relevance in host–pathogen interactions.     

Development of an SPME-GC-MS/MS procedure for the monitoring of 2-phenoxyethanol in anaesthetised fish

2-Phenoxyethanol (ethylene glycol monophenyl ether, C(8)H(10)O(2)) is a promising anaesthetic agent used in fisheries and aquaculture. The aim of this study was to develop a fast and easy method to determine 2-phenoxyethanol residue levels in fish tissue and blood plasma, and, subsequently, to use the method to monitor the dynamics of 2-phenoxyethanol residues in fish treated with anaesthetic. We developed a new procedure that employs solid phase microextraction (SPME) of the target analyte from the sample headspace followed by gas chromatography-mass spectrometry (GC-MS). Both sample handling, aimed at maximum transfer of 2-phenoxyethanol into the headspace, and SPME-GC-MS conditions were carefully optimised. Using a divinylbenzene/Carboxen/polydimethylsiloxane (PDMS/CAR/DVB) fiber for 60 min sampling at 30 degrees C and an ion trap detector operated in MS/MS mode, we obtained detection (LOD) and quantification (LOQ) limits of 0.03 and 0.1 mg kg(-1) of sample, respectively. The method was linear in a range of 0.1-250 mg kg(-1) and, depending on the sample matrix and spiking level, a repeatability (expressed as relative standard deviation, R.S.D.) of between 3% and 11% was obtained.     

Synthetic,structural and spectroscopic studies of complexes derived from the copper(II) perchlorate/fumaric acid/N,N′-chelates tertiary reaction systems

The synthetic investigation of the Cu(ClO₄)₂·6H₂O/fumaric acid (H₂fum)/N,N’-chelates (1,10-phen, 2,2′-bpy) tertiary reaction systems has yielded mononuclear, dinuclear and tetranuclear complexes, and three coordination polymers. The chemical and structural identity of the products depends on the solvent, the absence or presence of external hydroxides in the reaction mixtures and the N,N’-donor. Three fumarato(−2) complexes, i.e. compounds [Cu₂(fum)(phen)₄](ClO₄)₂·2H₂O (1·2H₂O), [Cu(fum)(phen)(H₂O)]_n (3) and [Cu₂(fum)(bpy)₂(H₂O)₂]_n(ClO₄)_2n (6), were isolated and structurally characterized, and four non-fumarato complexes, i.e. compounds [Cu₄(μ₃-ΟΗ)₂(μ₂-ΟΗ)₂(phen)₄(H₂O)₂](ClO₄)₄·2H₂O (2·2H₂O), [Cu(ClO₄)(phen) (MeCN)₂(H₂O)](ClO₄) (4), [Cu(ClO₄)(phen)(MeCN)₂]_n(ClO₄)_n (5) and [Cu(ClO₄)₂(bpy)(MeCN)₂] (7), were simultaneously obtained from the reaction systems investigated. The coordination versatility of the fumarato(−2) ligand is reflected to the three different coordination modes observed in 1·2H₂O, 3 and 6; the monodentate bridging μ₂-κO:κO′ mode in 3, the asymmetric chelating bridging μ₂-κO:κO′:κO′′:κO′′′ mode in 1·2H₂O and 3, and the syn,syn bridging μ₄-κO:κO′:κO′′:κO′′′ mode in 6. The crystal structures of the complexes are stabilized by intra- and inter-molecular hydrogen bonding and π–π stacking interactions leading to interesting supramolecular architectures. Characteristic IR bands of the complexes are discussed in terms of the known structures, and the coordination modes of the fum²⁻ ligands.     

Comparison of QuEChERS sample preparation methods for the analysis of pesticide residues in fruits and vegetables

This article describes the comparison of different versions of an easy, rapid and low-cost sample preparation approach for the determination of pesticide residues in fruits and vegetables by concurrent use of gas and liquid chromatography (GC and LC) coupled to mass spectrometry (MS) for detection. The sample preparation approach is known as QuEChERS, which stands for “quick, easy, cheap, effective, rugged and safe”. The three compared versions were based on the original unbuffered method, which was first published in 2003, and two interlaboratory validated versions: AOAC Official Method 2007.01, which uses acetate buffering, and European Committee for Standardization (CEN) Standard Method EN 15662, which calls for citrate buffering. LC–MS/MS and GC–MS analyses using each method were tested from 50 to 1000 ng/g in apple–blueberry sauce, peas and limes spiked with 32 representative pesticides. As expected, the results were excellent (overall average of 98% recoveries with 10% RSD) using all 3 versions, except the unbuffered method gave somewhat lower recoveries for the few pH-dependent pesticides. The different methods worked equally well for all matrices tested with equivalent amounts of matrix co-extractives measured, matrix effects on quantification and chemical noise from matrix in the chromatographic backgrounds. The acetate-buffered version gave higher and more consistent recoveries for pymetrozine than the other versions in all 3 matrices and for thiabendazole in limes. None of the versions consistently worked well for chlorothalonil, folpet or tolylfluanid in peas, but the acetate-buffered method gave better results for screening of those pesticides. Also, due to the recent shortage in acetonitrile (MeCN), ethyl acetate (EtOAc) was evaluated as a substitute solvent in the acetate-buffered QuEChERS version, but it generally led to less clean extracts and lower recoveries of pymetrozine, thiabendazole, acephate, methamidophos, omethoate and dimethoate. In summary, the acetate-buffered version of QuEChERS using MeCN exhibited advantages compared to the other tested methods in the study.     

Adsorption of Polycation and Anionic Surfactant onto Iron Surfaces and the Inhibition of Carbon Dioxide Corrosion

The adsorption process of two polycations (pDADMAC and C‐PAM) with different charge densities has been investigated using the quartz crystal microbalance technique with dissipation monitoring (QCM‐D). The effect of the charge density of the polycation, the NaCl concentration, and the complexation with an anionic surfactant are addressed in this work. X‐ray photoelectron spectroscopy and atomic force microscopy were utilized to analyze the adsorbate with respect to the film coverage and film structure. The corrosion‐inhibiting performance of the films on high‐purity iron in a CO₂ saturated brine, at 25°C, 1 bar CO₂, and pH 4, was investigated by the linear polarization resistance technique. It was found that the polycations adsorbed onto the iron surface, but the corrosion rate of 1 mm yr^?1 was not lowered. However, the polycations formed a complex with an anionic surfactant, and such films showed excellent inhibition performance. Both films, of pDADMAC/SDS and of C‐PAM/SDS, lowered the corrosion rate of iron below 0.01 mm yr^?1. The SDS concentration was below the cmc. It is believed that the SDS adsorbed into the preadsorbed polycation film, forming a complex structure resulting in a hydrophobic and dense film.     

Determination of cationic mobilities and pKa values of 22 amino acids by capillary zone electrophoresis

The effective mobilities of the cationic forms of common amino acids--mostly proteinogenic--were determined by capillary zone electrophoresis in acidic background electrolytes at pH between 2.0 and 3.2. The underivatized amino acids were detected by the double contactless conductivity detector. Experimentally measured effective mobilities were fitted with the suitable regression functions in dependence on pH of the background electrolyte. The parameters of the given regression function corresponded to the values of the actual mobilities and the mixed dissociation constants (combining activities and concentrations) of the compound related to the actual ionic strength. McInnes approximation and Onsager theory were used to obtain thermodynamic dissociation constants (pK(a)) and limiting (absolute) ionic mobilities.     

Electron Tunneling Rates in Respiratory Complex I Are Tuned for Efficient Energy Conversion

Respiratory complex I converts the free energy of ubiquinone reduction by NADH into a proton motive force, a redox reaction catalyzed by flavin mononucleotide(FMN) and a chain of seven iron–sulfur centers. Electron transfer rates between the centers were determined by ultrafast freeze‐quenching and analysis by EPR and UV/Vis spectroscopy. The complex rapidly oxidizes three NADH molecules. The electron‐tunneling rate between the most distant centers in the middle of the chain depends on the redox state of center N2 at the end of the chain, and is sixfold slower when N2 is reduced. The conformational changes that accompany reduction of N2 decrease the electronic coupling of the longest electron‐tunneling step. The chain of iron–sulfur centers is not just a simple electron‐conducting wire; it regulates the electron‐tunneling rate synchronizing it with conformation‐mediated proton pumping, enabling efficient energy conversion. Synchronization of rates is a principle means of enhancing the specificity of enzymatic reactions.     

Fluorescent Isoindole Crosslink (FlICk) Chemistry: A Rapid,User‐friendly Stapling Reaction

The stabilization of peptide secondary structure via stapling is a ubiquitous goal for creating new probes, imaging agents, and drugs. Inspired by indole‐derived crosslinks found in natural peptide toxins, we employed ortho‐phthalaldehydes to create isoindole staples, thus transforming inactive linear and monocyclic precursors into bioactive monocyclic and bicyclic products. Mild, metal‐free conditions give an array of macrocyclic α‐melanocyte‐stimulating hormone (α‐MSH) derivatives, of which several isoindole‐stapled α‐MSH analogues (K_i≈1 nm ) are found to be as potent as α‐MSH. Analogously, late‐stage intra‐annular isoindole stapling furnished a bicyclic peptide mimic of α‐amanitin that is cytotoxic to CHO cells (IC₅₀=70 μm ). Given its user‐friendliness, we have termed this approach FlICk (fluorescent isoindole crosslink) chemistry.